Simple speaker setup for ATV?

I understand if I get bumped because this post isn't ATV-related... But I argue that other ATV users might find this thread helpful. So...
I purchased a new HD TV, one that I will use solely with Apple TV. I want better audio than the built-in speakers. Since I'm not going to need AM/FM radio, CD player, etc., I don't need or want a traditional AV receiver.
I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)... and that's it. I've seen computer-type speakers that accept a 2.5mm audio cable, from the headphone-out of the computer. The audio signal runs to one speaker, which is the "parent" speaker -- it accepts the audio from the computer, the power input to the speaker system, and then an audio cable that runs audio to the other speaker. I want the same setup... except that it sends an optical audio signal.
Does anyone know of a speaker system that will do this? I don't need all of the bells and whistles of a traditional receiver/speaker setup. Many other Apple TV users out there might have the same, simple needs.

I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)...
This may be much more than you want, but is I believe what currently replaces my Logitec Z680 which I am still using on my old PPC G5. It is a 505 watt RMS optical input amplified speaker system with 5.1 DD/DTS/Pro Logic II decoder built into the control head. Believe the street price is in the $325-$350 range if interested.

Similar Messages

What should i set the quicktime speaker setup for itunes?

I have 4 speakers and a sub........altec lansing's.....Is that considered a 4.1 setup....and if so can i also consider 4.1 and quadrophonic setup?....and also im assuming if i had that center speaker it would be considered a 5.1 setup...

No, you cannot create a QT reference movie using QT Conversion. The reason I'm asking you all these (seemingly unrelated) questions is that I get the sense that you are resizing in your export out of FCP 5, and resizing in not the optimal fashion.
Detail your sequence settings in FCP - including frame size - and how exactly are you exporting to Compressor.

Speaker setup for Apple TV

I am interested in purchasing Apple TV to be able to play itunes and other music apps (spotify, iheart radio, pandora) thru my ipad to the TV speakers when my MacBook is turned off. Is this possible? The other capability I am looking for is multiple wireless speakers- one in the living room where the TV is, and one in the back bedroom. Is this possible and what kind of speakers would I need? TV surround sound speakers? Airplay speakers? I am not interested in Sonos due to the price tag.

Also, I have an Airport Extreme attached. I also have an Airport Express that I'm not currently using.

SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?

I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?

I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah!

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

How to create a simple File structure for a large project?

Hi to all,
I've own and operated my own website design/development (a 1 woman office, plus many sub-contractors) over the period of 8 years. I started hand-coding HTML sites in 1997, before the creation DW (though I think the first ver was for Mac in '97). Over the recent years I've udated my skills to include CSS and enough Java/PHP to customize and/or troubleshoot current projects (learn as I go).
The majority of my clients have been other 1-10 person entrepreneur companies. I've recently won a bid to redesign a government site which consist of 30 departments, including their main site.
The purpose of this thread is to get some ideas on creating a file management/structure. Creating file management setup for smaller companies was a piece of cake, using a simple file mgmt structure within DW. Their current file structure is all over the place. I've read about a very good, simple file struture in a DW CS4 manual and wanted to get feedback on different methods that have worked, and have not worked, or your client:
Here's my thinking:
1. within the root dir place home.htm and perhaps a few .htm related only to home
    2. create the following folders off the root, "docs, imgs/global, CSS, FLA, Departments"
            - sub folders within docs for each dept
            - site wide css's placed into CSS
            - site wide FLAs into the FLA
            - sub-folders created within 'imgs' for each dept, including a 'global folder' for sitewide images and menu imgs (if needed)
- OR -
1. create same file structure for each dept folder, such as 'imgs/CSS/FLA/Docs'
Open for suggestions....
Ciao

It is a problem I have thought over at length and still feel what I use could be better. You are doing it the right way around researching before you start, as moving files once things are underway can course real problems. One issue is the use of similar assets across site(s), and version control if you have multiple versions of the same asset.
Can not say I have built a site(s) of that size but would recommend putting together a flow chart to help visualise the structure and find out better ways organising (works for me). Good luck, post back with your solution.

How do I get my external microphone to go through my speaker system for on-line karaoke?

How do I get my external microphone to go through my speaker system for on-line karaoke?

You can use a simple little App called LineIn to Pass Thru Audio from Input to Output.
Go to > Rogue Amoeba | Freebies: Free Software for Mac OS X

Need advice on best setup for Extreme and Express w/ (n only) network

I'd like to get some advice on the best setup for my situation. I've read a number of posts on WDS, Extending a Network, etc. and, unfortunately, I'm now more confused than ever.
We have an Airport Extreme 802.11n using WPA2 Personal, 2.4Ghz (n only connection) which I've found to give us the best range/connection speeds for the following devices (all computers running 10.5.5, Apple TV's using most current update):
(2) MacBooks
iMac
(2) AppleTVs
The good news we have a large house, the bad news we have a large house. Meaning of course that I don't get the range in parts of the house I'd like to. I also have an older Mini (G4) connected to the AEBS thru ethernet (the Mini acts as the iTunes server for the ATVs).
I just bought a new Airport Express with the desire to place it on the other side of the house to both enhance the range of the wireless network and to provide another wired to wireless connection to the network.
I initially merely chose to "Extend a wireless network" but that seems to have a MAJOR adverse impact on the speeds of the wireless network. dropping the streaming to one of the ATV by like 90%. I would like to maintain the security settings I have as well as the 2.4Ghz (n only) since these provide the best speed/connection range on the AEBS.
My question then is what is the best way to use the AX (WDS? Bridge?).

The best way to use it is the option you chose "Extend a wireless network".
WDS forces you to the much slower 802.11g and even cuts that bandwidth in half.
Operating as a bridge has nothing to do with wirelessly extending a network. Changing this option won't have any effect on wireless bandwidth.

5.1 Speaker Setup not stick

I just recently got a set of Logitech X-530 speakers. My sound card is the Soundblaster Li've! 5. card. I have verified that I've got the speakers plugged in correctly. I went to the speaker setup in the Creative software and set it to 5. (without digital output). At this point everything works great. However, after I reboot my computer the speaker setup goes back to 2 speakers. I have verified (using Creative's Auto-Update Acti'veX Control) that I have the latest drivers for my sound card. Is this a SB issue or a Windows issue? What do I need to do so that my computer will remember my speaker setup?Thanks.

kinadian wrote:
I do not see a "Synchronize with Control Panel" option in the Surrond Mixer settings anywhere. Where should I be looking for it's
Also, after I've set the speakers to 5., I can go into Control Panel\Sounds and Audio Devices and the speaker setup is configured properly in there. As far as I can tell everything is ok. Until I reboot. Then it reverts back to 2 speakers.
It's more of an annoyance issue than anything else. Since I can go into the settings and switch it back. I would just rather not have to do that everytime I reboot my machine.
On Speaker Settings, not on Surround Mixer.
jutapa

What is thes best 5.1 speaker kit for macbook pro 2011

what is the best 5.1 speaker kit for my macbook pro
thanks for help.

A 5.1 is considered a surround sound system, it's typically used in home theater systems, not computers.
A computer doesn't have the necessary electronics to produce the rich quality of sound that a 5.1 system can deliver, the PC 5.1's are just gamers gimmick cards, they too really don't have the necessary electronics or wattage for rich, full bodied sound.
Now I can tell you what works really well as a 5.1 system for iTunes, movies and such from your MacBook Pro, or anything really.
A Harmon Kardon 5.1 Home Theater.
It has 110 Watt speakers, 5 of them, and a 200 watt subwoofer that will make your heart thump in your chest.
You need only two things with this system, a optical stereo mini Toslink adapter and a optical Toslink cable.
You plug one inside your MacBook Pro (enable the optical out) and the other to the receiver and mess with the remote to enable theater mode from the computer for iTunes (takes stereo and makes it quad sound with separate bass)
For playing DVD's with 5.1, you enable the right 5.1 encoding, Dolby, ProLogic etc on both and the Mac passes the 5.1 through the system to the receiver.
For playing 3D games, you just pass the 5.1 through, the receiver handles the surround sound.
The important thing is setup, the listening point needs to be right in the center of the four channel speakers, the center is over your monitor or TV and the subwoofer is stuck in a free corner someplace, it's placement is unimportant, as long as it's in the room and not blocked.
Brother, you have system like this hooked up to your iTunes and tears will be falling from your eyes the music sounds so good. Makes you full hear the full quality of the iTunes bought music.
Will set you back a couple of thousand, but it's worth it. All the cables etc are color coded, easy to setup.
http://www.harmankardon.com/Pages/LocaleSelector.aspx
Hope that helps
(no comp)

Will Creative Ever Support The 6.1 Speaker Setup In Vista?

The subject line says it all. I'm disappointed that I have a 6. speaker setup with my X-Fi card that worked great in Windows XP, even the x64 edition. Now since I've updated to Vista, the rear center speaker is no longer enabled. I know the current driver set has a note on this, but just wondering if we will ever get 6. surround support again.

alexs3d2 wrote:
No, because Microsoft doesn't support it.
I'll elaborate on that a bit for you. The 6.1 surround setup is not supported in Vista. This means that (barring some bizzare workaround/emulation effort by Creative), you won't see 6.1 in Vista no matter what sound card/onboard chip you use. It's not up to Creative. Sorry. Microsoft could re-introduce 6.1 with a Vista update. I don't know if it's feasible to do so, but I wouldn't expect anything till Service Pack , as my guess is that would require some major sound architecture changes.

Easy setup for 1080p 24

i'm shooting 1080p 24 dvcpro hd (panasonic hvx200) and importing the p2 files into my project but it requires constant rendering (orange line) with every little change i make. i have the fastest mac and more than enough ram with a kona card and i still cannot edit because the frame rate is so bad unless i edit. what should i set my sequence settings to? does anyone out there with a similar setup have a simple step-through for me?
thanks

There isn't an easy setup. But there is a nifty trick to get sequence settings that match your clip settings:
www.proapptips.com/shane NON-STANDARD CODECS IN FCP
Then you should be set. Let me know if you aren't.
Shane

2.1 speaker setup on the SoundBlaster Live24 Extern

I have a 2. speaker setup but I can not figure out how to configure the Li've24 for 2.

I have a pair of Swans M-200's and a Totem Thunder Subwoofer. I have the Swans plugged into the front L+R output and the Subwooder plugged into the Sub/Center output on the Li've24 external. When I select 2/2. speaker output it only shows me the left and right speakers and the test tone will only produce sound out of the front left and right speakers and not the subwoofer. When I click on the "Bass Managment" tab everything including "Bass Redirect" is greyed out. The only way thus far I have been able to get the subwoofer to work at all is if I select 5. then the test tone will produce sound out of the subwoofer.

4.1 setup for x

I have had my X-Fi Extreme Music for a few days and I am very pleased with the improvement over my Audigy, particularly the much lower noise levels.
I am running the card with analog out to two pairs of speakers powered with one stereo amplifier each and a self powered subwoofer.
In the THX speaker setup I can either choose 5. and get sound from all speakers, but with a center channel which I don't have, or I can chose 4.0/4., but then I only get 4.0, e.g. no subwoofer.
Since it says 4.0/4. I suppose it is possible to specify a 4. setup, but how do I do this?

I just ran into this little problem myself. Selecting 4. in the Creative control panel with an xfi card gives you NO SUB OUT, even if you have a dedicated sub. Select 5. in the Creative control panel and guess what--you get sub out! Great! Too bad about the new hole in your sound field between the front left and right speakers though ... which makes this option completely unworkable.
Why can't we get the . in 4. I have to add a center channel that I don't want so I can get bass? I wish Aureal were still around so Creative still had to actually care about its customers ...

Is there an Apple alternative to using the Asus videophone. Is there a simple FaceTime alternative for an elderly person to use. iPod and docking station maybe?

I have an elderly parent and recently bought a secondhand Asus SV1T video phone to be able to Skype from my Mac, iPad,iPhone etc. The device was perfect from a usability point of view but when I set it up discovered that the latest vesion of Skype is not supported on the Asus and there is no hope of Asus issueing a firmware upgrade to fix it. So the question is "is there a facetime alternative that an 85 year old can use". It needs to be simple to operate, always on and reasonably compact. One thought I had was using an iPod in a speaker dock for power and amplification. I assume you can then tailor the front screen to simply show the facetime icon. Anyone got any thoughts?

You would need to have an iPad with 3G, and pay for cellular data service for it. If you have a wifi-only iPad, you simply cannot access the Internet anywhere that there is no wifi network available. You could tether it to a wifi hotspot created by a smartphone, though having a smartphone significantly reduces the need for FaceTime, I would think.

Simple speaker setup for ATV?

Similar Messages

Maybe you are looking for