Simple title shows up as missing compound clip after 10.1 update

None of my projects had any missing files prior to updating to 10.1. It all went quite smoothly with the exception of one project that has three or four clips that now show up as compound clips, but they were not compound clips in the original. One is a simple scrolling title. If I open the supposed compound clip in the timeline it looks like this:
    It is "attached" in some way to the previous still image and in fact if I return to the main timeline and select the clip and expand it by clicking and dragging the left handle so as to make the title longer it will actually roll into the previous clips and then the red "missing" compound clip will contain previous clip sections. Oddly if I play the project it all plays just fine and there are none of the clips that are marked as missing cause a problem.
     Has anyone seen this kind of behavior before?
    My product list is out of date....

You may soon develop a reputation for knowing something about this program, Tom.
Thanks very much. Now to research on why a project that was in the Updated Projects "folder" and then dragged to an event has disappeared entirely...but I'll post that question if I can't find the answer.

Similar Messages

Missing Compound Clip

I created some compound clips in a project that I am currently working on. After editing another area of the project, I discovered that a few of the compound clips appear to be blank. The clips have a large compound clip symbol that I can see but nothing plays - no audio or video. The clip name appears on top of the clip in the timeline but it does not show up in the index. I'm not sure what I did to cause this. It happened before and I just hit undo until the clip came back. I didn't catch this in time to do that. Would editing the compound clip in the timeline without expanding it cause this? I really don't want to re-do all my work.

The compound in the event viewer is also blank. It is the original, unedited clip that still plays. My fault for not understanding that. Here is what the compound clip looks like in the event viewer.

Precision editing in compound clips after creating them!

Scenario:
I have a storyline with clips and compound clips and it has a music bed underneath.
After making the compound clips I want to change some "compound "clips"" so that they match the music more precisely. The problem is when I open up the compound clip the music does not play so it is pure guesswork once inside.
I tried to add markers to the CompoundClip on the main storyline but they are not passed through.
Is there a way to do this? I used to wait till the end before creating CC clips but did it as I went along this time - something I am regretting at the moment.
Thanks Alan

mmm - I was thinking that myself but then thought I must have missed something.
Thanks Tom

Missing MSVCR80.dll after the latest update solved.

To all of you who lost iTune after the latest update, obviously there were some kind of bugs at their end. Very annoying. But here is the fix you can do it yourself. And don't worry your iTune is intact inluding your library.
First, you have to uninstall every Apple product via Control Panel, Program Uninstall. In that list you should have 4 Apple items; Apple Applicaiton Support, Apple Mobile Device Support, Apple Software Update, and iTunes. Uninstall them one by one.
Imoortant ot re-boot the system.
Then go to www.apple.com/itunes/, and look for the download button. That's it. As you go through the steps, be sure to instll as amdministrator.
You should get back your old iTunes with nothing missing.

Apple have a recommended order for uninstalling the components, and there are some other tips below...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Effects missing from clips after PP update

I have asked this question before, but nobody responded with any useful suggestions. Let me try again.
I spent an incredible amount of time keyframing Beauty Box effects on a timeline in Premiere Pro 8.0 during fall 2014. When I upgraded to 8.1, all the effects are simply gone from the timeline. To be clear, there are no "missing effects" messages; they are just gone.
Beauty Box is still installed and is an effect I can add to my clips with ease, but somehow, the update stripped all the effects off the timeline when it the project is updated to the new version.
Luckily, there is one machine at work that is still on 8.0 and recognizes my old project correctly. But - PP crashes literally every single time I try to adjust the Beauty Box effects that I spent many, many hours tweaking already.
Exporting an AAF also doesn't work: PP crashes every single time I try.
Short of adding the effect all over again to every clip and starting from scratch, is this a known issue to Adobe and is there a solution? I hesitate to upgrade Beauty Box, as updating any software in the middle of a project is a bad idea (see above).
And here are bonus issues: I use a Saffire Pro 14 for audio on my system. Everything was fine until the other day, when it stopped playing AIFs. If I try to import one and place it in the source monitor, everything locks up and PP crashes. There have been no hardware or software updates in these areas for literally months (aside form "upgrading" to the latest PP version about a month or so ago). The files play normally outside of PP. The solution to this, I found after a good bit of experimenting, is to switch to the Adobe audio driver. But why?
Also, I have a two monitor system. The right monitor is my program view. I usually set it nearly full screen (but not quite). Suddenly, it started taking up the entire screen with no borders (and no accessible controls) yesterday. I can't find a command to restore it to normal. (~ doesn't do it).
Another frustrating issue: warning boxes that normally appear on top of everything onscreen have begun appearing behind other PP windows, giving me the annoying system error noise whenever I try to touch anything. the only way I have found to reveal them is to switch to another program then toggle back to PP.
All of this has made it virtually impossible for me to get any work done on this project. Gotta say I'm not loving PP right now.er literally a month,
Message was edited by: Charles Mumford
UPDATE - after literally a month, all my missing effects re-appeared on my timeline tonight. Why? Who knows? But I'm glad they're back.

I have almost the same problem. As a workaround, I can check "sync all music" rather than "sync checked music" in iTunes. (By the way, it worked for a couple weeks and now it doesn't). I'm fortunate that all my music fits on my touch (though just barely). The only album that still exists on my ipod (officially anyways) is one that I bought from iTunes after upgrading.
Also, I listen to a lot of podcasts, and I haven't figured out how to make that work (they disappeared too).
Anybody know how to get back to a position where I can decide what I want for music and don't have to put everything on my touch?

Premiere Elements 8 shows MULTIPLE FRAMES ON SAME CLIP AFTER RENDERING

I manually rendered clips on PRE8 on the time line. When it finished I found multiple frames from the same clip on the sceneline. Does anyone knows whether this is normal?

Unfortunately, video from still cameras almost never works in Premiere Elements.
The FAQs to the right of this forum offer suggestions for converting it to a more standard DV-AVI.
http://forums.adobe.com/thread/415317?tstart=0

Z77A-GD65, "Missing Operating System" after running Live Update

So here's the brand new computer I assembled:
$309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
$219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
$199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
$179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
$119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
$99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
$99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
$99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
$74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
$59.40 CNPS9900MAXR Red CPU Cooler
$49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
$34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
$10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
$9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume. I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD. I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates. Constant errors as I went along, but generally it'd just skip to the next installation attempt. When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System". Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed). I switched the BIOS switch over, no dice. Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
Thanks in advance for any rendered assistance that leads to resolution.

The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed. I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking. Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue? Alas, all were borked. It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
As far as I can recall I'm using up to date BIOS, the last one or two. One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff. I believe I have all the drivers up to date as well. Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious
I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
Meanwhile, the good news is that the system has been fully operational and hella stable. I hadn't slept in almost 3 days, playing and installing stuff nonstop. The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping. That's just astounding

MISSING MSVCR80.DLL AFTER ATTEMPTING TO UPDATE ITUNES

I just recently saw an update to iTunes available so I go through the install. It gets almost done and then gives me an error message that it can't install and to try manually installing from the Tools menu in iTunes. Great.
Go to open iTunes and can't do it. Seems the failed install has deleted a .dll file iTunes needs. MSVCR80.dll is missing.
So I download iTunes from the Apple website and attempt to install from that. No luck. Can't seem to start Apple Services. Greeeeeeaaaaat.
Help.

Click here and follow the instructions.
(98853)

Anyone missing their blog after 2.02 update?

I updated to 2.02 yesterday and when I openend my site the entire blog was gone??? Anyone have this problem?
I grabbed the site files from my .mac account so the blog is still there but I'm not sure how to get that back into iweb?
Also, I had added 3 new blog posts before the update which I had saved but not published yet - those are gone - I assume for good?
Please help if you have any idea...

Actually, I'm missing my entire site. For more on that, check the 'site missing' thread.

Photos missing from iPhoto after operating system update

I recently updated my Macbook pro operating system to OS X version 10.10.1 and iPhoto to version 9.6 (910.29). After the updates, most of my albums in iPhoto are empty and in the photos folder, all photos pre-dating 2010 are missing. How do I recover these photos?

Obvious: restore from the back up you made prior to upgrading.
If that's not possible:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Missing reblog buttons after firefox 34. update

Pinterest, Tumblr, Wordpress buttons missing in dashboard, so are RSS that I follow. Help!

Do you mean in the Tumblr dashboard or is this on a different site?
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Clear Firefox's Cache
You can clear Firefox's cache completely using:
"3-bar" menu button (or Firefox menu) > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Graphical elements go missing in games after 4.3 update of z1

I recently updated my Xperia z1 to android 4.3,
Games like daddy was a thief and real steel world robot boxing are missing a few vital graphic elements.
In real steel WRB my robots are no longer visible... all robots suddenly became invisioble
In daddy was a thief, floor numbers and the bank has become invisible.
I though it was just problem with the game but having noticed two perfectly playable games have the same issue has made me think that it might be a problem with the phone itself, after all these problems only began after the update.
I havn't checked other games.
Has anyone else experienced this issue?
Please do something SONY..!
Its no good having quadcore phones where your not able to see the robots you fight with...
Solved!
Go to Solution.

After the update,some of the files of each games might have been modified or even removed.This happened too on my older Xperia P,so you should have backed up before updating.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Finding titles within compound clips

I didn't realize, until today, that the Timeline Index won't show any objects (eg titles), if they're inside compound clips on your timeline...
Unless you open the compound clip - explicitly.
I realize that a compound clip, is sort of like a "mini project" but this seems strangely inconvenient.
I was using the Timeline Index today, to quickly find the "one" title I had - since I was heavily zoomed in & didn't want to scroll to find it... But I couldn't find it. Little did I know, if it's in a compound clip - it's "out of bounds".
Finding stuff using the Timeline Index can be important. So This would seem to me, a good reason to try not use compound clips at all.
Should I be thinking differently about this?
Obviously "feedback" is about to be submitted, but I'd be interested in any thoughts about this.

Hisham,
Yes, though I'm looking for a single title (there's only one and I know it), in my video.
I can't put keywords on titles.
And this is exactly what the Timeline Index is for, given it has a "Titles" tab.
So, that it doesn't work within compound clips, still just seems like a mistake/anomaly, to me.
I won't stop using compound clips because of it, but in simple projects, I will take care to avoid them - since it divides my simple project into a Timeline that is basically "not indexable" - as per the features in the "Timeline Index"

Compound clip imported into project not showing up in the event browser

I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
Ps. I have very recently updated my FCPX from version 2 to 5.
DR.SOMANNA

Let me explain the matter in a different way...
I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
Hope I have made myself clear.
DR.SOMANNA

Compound clips showing as missing events

I started a project on Macpro tower, then copied that project with all it's events and media to a portable hard drive to work on it with my Macbook Pro. I did not import anything into the event for this project while working on the Macbook, but I did create some compound clips. After working on the Macbook, plugged the portable drive into my Macpro tower and copied the project back to the hard drive in the Mac Pro. I performed the copy via drag and drop withinn Final Cut Pro X. I then began to work on the project. I did not re-copy the events and clips back to the Mac Pro tower, because they are all there already.
Now, I find that when I eject the portable drive from the Mac Pro tower, the compound clips show up as a missing event, even though the clips within those compound clips are in the current project. I've tried to re-link the media, but there doesn't seem to be a way to re-link the compound clip. I could just trash the new project, but I've done some work on it that I don't want to lose. Any help would be appreciated.

Scott Odgers wrote:
now I know to re-import everything back even if nothing has really changed.
I am glad you got it working. But something did change. You created compound clips in the Event Library when you added them to your project on the MBPro. When you opened the project on your tower there were no compound clips in the event library without the portable drive connected. Once you copied the new events onto the tower event library FCP was happy and all you need to do is replace the old compounds in the timeline with the new ones.

Simple title shows up as missing compound clip after 10.1 update

Similar Messages

Maybe you are looking for