Simplepass for windows (8.1) logon

I recently had my Windows 7 OS crash after shutting off during an upadte. I had my harddrive backed up and saved then wiped the HD. Windows 8.1 was then installed and I have not been able to load the simplepass onto my computer with teh windows fingerprint logon. Is there a way to get the fingerprint reader back as a windows logon tool? That was a big reason for why I purchased this computer a few years ago.

Hi @zoojenn22
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Hp Simplepass for windows 8??

I've just installed Windows 8 but i've seen that HP Simplepass isn't working with... what can i do???

Hi,
Only thing you can do now: wait. Unless you are a tester (for HP), all end users have to wait until MS has its Windows 8 operating system sorted out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

SAPGui for Windows Multiple Logon with Portal

Hi,
We are using SAPGUI for Windows in Portal in the external window, we are also using it the SAPConsole form the desktop. While using from desktop, the multiple logon (within same client) complains / comes with the pop-up with two standard options.
We would like achieve the same functionality of popup (Restricting multiple logons for the same client) within the portal, any ideas?
I came across certain threads and also notes but none seem to provide a solution....
[Restrict multi logon to R/3 system from portal using single sign on. |Restrict multi logon to R/3 system from portal using sigle sign on.;
[SAP GUI 7.10 and SSO - multiple logons issue. How to restrict it? |/thread/1623980 [original link is broken];
Note 142724 - Prevention of multiple SAPGUI logons
Thank you in advance.
Best regards,
Dharmi
Edited by: Dharmi Tanna on Jun 25, 2010 2:09 PM

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

How to Enable password saving in SAP Logon for Windows

how to Enable password saving in SAP Logon for Windows

Even though password saving, in SAP Logon for Windows is disabled by default, this can be enabled following the steps listed below:
    Open the command prompt by navigating to Start → Run and by typing “cmd”.
    Go to the \SAP\FrontEnd\SAPgui directory (in Program Files), through the command prompt.
    Create the necessary value in Windows registry by typing: sapshcut -register An information message will appear.
    Open the registry editor, in order to access Windows registry, by navigating to Start → Run and by typing “regedit”.
    Go to the HKEY_CURRENT_USER\Software\SAP\SAPShortcut\Security registry key.
    Change the value data of “EnablePassword“ from 0 to 1.
    Close SAP Logon and open it again, in case it was open during the whole process.

Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

'Secondary Logon' service for Windows servers - enable or not?

Hi,
Since have only one windows server working as 'TS server' to remote employes on our network and another 04 (one for SQL, another for Exchange, another for File and another for DHCP/DNS), can we disable that service on all servers except TS server or we can
disable it on all??
>>> There is some services that depends on it?
interesting article:
http://tech-wonders.blogspot.com.br/2009/08/disable-secondary-logon-service-to.html
useful links:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sys_srv_secondary_logon.mspx?mfr=true
http://www.blackviper.com/windows-services/secondary-logon/

Windows Secondary Logon allows administrators to log on with a non-administrator account to perform administrative tasks without logging off by using Run as option.
Enabling/Disabling depends from one organization to another.
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Writing CSP (plz help) for windows logon

Hi all,
I am using Gemplus GemXpresso 211 PK card for windows 2000 log on..
How to write CSP for the same?
Is there any "Cryptographic Service Provider Development Kit" available???
Hope any positive reply.
Thanks in adv.

1) You need to contact GEMplus for the gory technical details of how to communicate with the card (probably there is a device driver written by GEMplus, you need to know how to communicate with the drivers). Check if the GEMPlus site has some technical information available.
2) Search "CSPDK" in MSDN downloads ( http://msdn.microsoft.com ) , there is a download of the CSPDK. The sample programs do not work as is (you'll need to change some file names...), and you need to search the MSDN newsgroups ( news://microsoft.platformsdk.security - or http://msdn.microsoft.com/newsgroups, require a .NET Passport, but it is free - just a single registration) and ask for help.
To make it work in a production environment, you'll need to submit the finished DLL to microsoft ( mailto : cspsign at microsoft.com ).
3) Prepare yourself for a daunting task - your skills will be heavily exercised.

Jabber for Windows login to the IM&P but not to the CUCM

Hi,
I have Jabber for Windows, IM and Presence Server 10.5 and CUCM 10.5. The problem is it says it cannot communicate with the server upon logging in. But if I typed a wrong username / password it says "Your username and password is not correct."
When I try to login to the IM&P it seems okay (even though without phone services). When I try to login to the CUCM it shows some problem.
I've create CSFMGUIDO device with password 12345. When I logon to the CUCM with the following credentials: mguido - 12345 it says "Unable to communicate with the server". When I logon to the CUCM with the following credentials: mguido - 00000 it says "Username and password is not correct".
I'm not using neither LDAP nor DNS. With Android Jabber all it's working correctly.
Has anyone experienced this?
Hope someone can help.
Thank you.

J4W does rely very heavily on DNS, you should at least all required entries to hosts and lmhosts.
How are your servers defined under system -> server??
Are you able to log into UCMuser page??
Have you properly configured all user/device/line association, and created the necessary service profiles???

How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users.

Hi @mfatihbodur
Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
Validity Fingerprint Sensor Driver (Windows 8.1)
HP SimplePass Identity Protection Software (Windows 8.1)
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

SAPGUI for Windows via Portal - problem with frame

We are launching SAPGUI for Windows via Portal to drive single sign-on via AD. Our problem is that when SAPGUI launches, it is contained within an IE browser frame that causes some of the SAPGUI screens to not fit on the screen well. Those same screens fit just fine if we launch SAPGUI directly.
Is there any way to launch SAPGUI from Portal, with SSO enabled, but without the IE frame around it?

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

Password Vault for Windows 7?

Hello,
I have installed Windows 7 RTM on my laptop. I've downloaded all the Lenovo ThinkVantage packs and utilities that I think I need, but the password vault does not appear to be installed or working. I did install the Fingerprint Reader driver, and have enrolled my fingerprints, but I am not being prompted to save username/password at websites, and the Windows logon screen still shows the default MSGINA, not the Lenovo fingerprint logon.
What have I missed?
Thanks!
-Christian

Christian,
Try going to the Fingerprint Software Settings and check-mark the box that says "Use fingerprint scan instead of password when logging into Windows." This will allow you to use the finger scaner to log-in. As far as saving user names and passwords, you will need to download the ThinkVantage Client Security Solution:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-46391
Unfortunately Windows 7 is not yet supported.
Does anyone have a link to the beta ThinkVantage Client Security Solution for Windows 7?

MARS - NFS on Unix Services for Windows and deleting files

Hello !
I've prepared NFS server on W2k3 server with Unix Services for Windows installed. It works OK, the only problem is moveing/deleting files and folders. It seems like a problem with permissions for anonymous user. Does anybody have similar experience ?

If you receive the following error message "Error ./pnarchiver Thread 2051:PN-0102:SQL error: ORA-01005: null password given; logon denied" then there is a Problem with archiving to NFS server. The directories for the archiving are properly created on the server but those directories remain empty. The workaround is that an inter operability issue exists between MARS and CygWin NFS server running on Windows 2003 server. To work around such inter operability issues, replace the NFS server with Microsoft Windows Services for Unix.

In WAS 7.0 for windows custom connector VBscript not working

Hi ,
I am using custom connector for windows 2003 server. It has java and vbscript .Java retrieve the dynamic values of servername,userid,password from the server it will pass to the VB .VB will connect to the windows 2003 server and it will create user,update user,delete user etc.I deliverd the connector which is working in the Jboss and Bea weblogic application servers.The customer asking for Websphere application server When i use the Websphere application Server 7.0 The "Vb script is not working for provisioning(Create user function) please help on this .example vbscript code as follows
Set objNS = GetObject("WinNT:")
Set objRemote = objNS.OpenDSObject("WinNT://" & strComputer, strAdminUser, strAdminPassword, ADS_SECURE_AUTHENTICATION Or ADS_USE_ENCRYPTION)
Wscript.echo "Connection established successfully with system: " & strComputer
Set objUser = objRemote.Create("user", strUserName) ' error is (null): A specified logon session does not exist.
'It may already have been terminated.
objUser.FullName = strFullName
objUser.SetPassword strPassword
objUser.SetInfo
above mentioned line i am getting the error . I tried by the hard coding the values for that also same problem.But when remove the script from connector and run it outside its working .Please help on this

There is usually a button bar with buttons to format text like Bold and Italic just above the text area where you compose and edit the message text.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the link text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).

How to Create Roaming Profile(s) For Windows Workgroups

This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

Default Profile for Windows clients

Anyone know how to create default profile for windows clients from the SMB server on mac os x server? Do you just copy an account to default user on a windows client?

I am having the same issue the clients can save the data to the path therefore cant read it upon logon...Grrrrr

Simplepass for windows (8.1) logon

Similar Messages

Maybe you are looking for