Simplest way to connect my laptop to the airport express to stream music

what would be the simplest way to connect my airport express and my macbook so i can listen to the music i have on itunes on my stereo? Would it affect my purchased band with if i do it thru my wireless modem? can it be done without using cables? Too many questions, thanks!!

harh wrote:
what would be the simplest way to connect my airport express and my macbook so i can listen to the music i have on itunes on my stereo?
Configure Express via AirPort Utility to Join your existing wireless network. Plug the Express into an outlet near your stereo and plug the audio out from the Express into your stereo. You need a 3.5mm plug or optical cable to whatever is available on your stereo.
Would it affect my purchased band with if i do it thru my wireless modem?
Affect your wireless bandwidth? Yes, but it's still the most efficient way to stream. Affect your internet bandwidth? No.
can it be done without using cables? Too many questions, thanks!!
Yes.

Similar Messages

  • How do I set up iPad with airport express to stream music to stereo without internet connection?

    how do i set up iPad and airport express to stream music to stereo without using internet connection.

    Your 4th gen iPad does have the necessary software to connect to the AirPort Express but not to administer it. To do the later, you would need to install the AirPort Utility applet.
    You said that your iPad can "see" the AirPort's wireless network, but can't connect. What happens exactly when you attempt to do so? Do any of your other wireless devices have any trouble connecting to the Express? Did you configure the Express for a closed network ... that is, not to broadcast its Network Name?

  • Has anyone connected a scanner to the AirPort Express unit?

    I have an AirPort express wireless unit right now running as a range extender. I have not connected a printer to it yet and I was wondering if the unit only allows printers or would a scanner or other similar USB device also work?
    I am more curious right now, and simply wondering if anyone has been successful connecting a non-printer to that port.
    Dual G5 and MacBookPro   Mac OS X (10.4.6)  

    thanks to both of you for the info but I am a stubborn guy:)
    That article does not exclude scanners in the list of devices that don't work.
    A scanner is "close" to a printer. Certainly closer than a disk drive, and as Spok says, "There are always possibilities."
    I was told that the AirPort Express device would not work with my LinkSys SRX200 and it works fine as a range extender.
    I will first connect a printer to the USB port just to get my feet wet and after I get that working I will unplug it and connect my scanner to it and see what happens. The very worst thing would be that the world comes to an end.
    Anyway, I will report back what happens. Certainly something should happen such as an error message or a driver error or some such thing or it might work.
    Being a born hacker, telling me it won't work is music to my ears.
    OK, maybe it won't work. But so far, nobody has told me why.
    I will return
    Dual G5 and MacBookPro   Mac OS X (10.4.6)  

  • Why won't Airport Utility recognize my Airport Express? I'vetried re-booting router, Modem, reset button etc.  It was working fine until I was asked to do an update.  I got the Airport Express to stream Itunes to external Audioengine 5 speakers. 3 hrs!

    I have tried everything for over 3 hrs. I purchase really good Audioengine speakers and an Airport express.  Everything was streaming fine via Itunes until I was prompted to do an update yesterday.  Now Airport Utility won't recognize the Airport Express. I tried everyhing.  I have an older Mac desktop and simply wanted to stream music to the remote speakers.  I tried reet button on the Airport express, re-booted my computer, modem, wireless router.   Help!

    Be sure you performed the "hard reset" correctly. The following is an excerpt from Resetting an AirPort Base Station or Time Capsule FAQ
    Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    Release the button, and the AirPort Base Station or Time Capsule will hard reset.
    ... but read the entire document to ensure you do it correctly. An Express that has been "hard reset" will create an open network with the name "Apple Network nnnnnn" where nnnnnn = the last few digits of its MAC address. Select that network.
    If you do not see the network in your Mac's Wi-Fi menu with that name, the "hard reset" did not take effect, which will happen if you do not hold its little reset button depressed long enough. In that case do it again.
    Following the "hard reset", reconfigure your Express.

  • HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

    what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

    Hello quinstar,
    It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
    HT4356 Can I use personal hotspot as wifi to connect printer?
    https://discussions.apple.com/thread/4007254
    Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How to connect my macbook to the Airport with the same IP?

    Hi to everybody!Most of the times I want to use amule it is firewalled because the IP changes everytime I connect my macboook to the Airport express: 10.0.1.2 or 10.0.1.3 and so on. Is there a way to say that I want my macbook to be always connected with the same IP? Since I couldn't do this I started to map the amule ports (TCP and UDP) for each IP, but I realised that I can't use the same ports (let's say TCP 4662 and UDP 4672) for different IPs. Why is that?
    Thanks in advance!

    lellolelotti wrote:
    Most of the times I want to use amule it is firewalled because the IP changes everytime I connect my macboook to the Airport express: 10.0.1.2 or 10.0.1.3 and so on. Is there a way to say that I want my macbook to be always connected with the same IP?
    I believe that an AirPort Express can be configured to do that. Launch AirPort Utility, enter "manual setup" mode, select the Internet panel, then the DHCP tab. There should be a section of the screen at the bottom labeled "DHCP Reservations". Click in the "plus" sign at the bottom of that section and fill in the details that you want.
    I can't use the same ports (let's say TCP 4662 and UDP 4672) for different IPs. Why is that?
    You have to tell the router to send messages addressed to a certain port to a specific IP address, otherwise it wouldn't know how to route the messages. It would be like trying to assign a phone number to two different phone line circuits.

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Laptop cannot see airport express

    I have three laptops on my home network.  Two can see my airport express, one cannot.  I have the airport express set to join my home network automatically.  I am only using airport express to be able to listen to my itunes music through my home stereo.  Two laptops, my iphone, all of the ipods in my home work just fine.  The laptop that does not work is a Dell Latitude E4310 (my work laptop).
    Any ideas why I cannot see my airport express?

    When you use the Airport Utility, does the 'printers' window show your Epson being connected via USB to the Airport Express?
    Seth

  • Want to know about the AirPort Express and AirTunes

    I have been contemplating purchasing an AirPort Express to stream music from my bedroom into the entertainment room in a 4 bedroom apartment. I have a wireless G D-link router which could be better but its not going to get better any time soon. As far as AirTunes goes, i have been researching it but still have questions on how it works exactly. Also, is it possible to play music through the speakers that are currently hooked up to my computer and through the stero in my living room simulaneously with this device.

    So i have the airport express and i want to use internet at the same time as streaming my music to my stereo. I also have a router that i normally use for internet. My problem is, how do i use them at the same time because the airport run's or the router runs not both. I tried running a ethernet cord from the router to the airport express, and i can now recieve internet and stream music, but i want to be able to use my router instead of the express. also if i can't and have to go through the express, can i password protect the internet connection because i have no idea how to use settings for this device?

  • Is the Airport express Ethernet port input only?

    I am thinking of the airport express to stream audio now that the iPad supports airplay, but am wondering if the ethernet port is useful. I think that the Airport can connect to my existing wifi, and I have the audio interface, so far so good! But I also have a gaming adapter that takes the wifi signal and outputs it through an ethernet cable to my DVR, I am wondering if I can redeploy the gaming adapter

    If you configure current model the AirPort Express to "join" a wireless network for AirTunes/AirPlay, you can also enable the ethernet port if you wish so an ethernet device can connect. If you need more than one ethernet port for devices, you can attach an ethernet switch to the Express.

  • What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

    what is the best way to connect my ipad to the high speed inernet connection in a hotel room

    every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
    As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
    most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

  • What is the best way to connect my guitar to the usb port on my IMac

    This is for use with Logic Pro X
    what is the best way to connect my guitar to the usb port on my
    I-Mac

    As has been said really, the less you pay the less quality, and flexibility you'll have on your sound.
    For example, you could run on a 'Rocksmith Real Tone Cable' if you just wanted a cheap way of getting your guitar into the computer for some fun.  Probably cost you $30 (I live in UK so can't be sure).  If you're starting out then this could be considered the best option for dipping your toe in the water without spending too much.
    You won't get a really nasty sound out of that if you can process it yourself in Logic afterwards to clean up, but it won't be great either.  I imagine it could get quite noisy so you'd need to get heavily gating your guitar sound, if you're playing something clean that's not ideal.
    Longterm, you're far better getting a decent audio interface, as you need something to play sound back through, if you have different input sources you usually have to create an aggregrate device on osx to use multple sources at once esp if you're using the built in audio chip on your mac to listen. 
    All this can add latency and possibly sync issues (i.e. drum tracks not in time with audio etc.), although generally it's not too bad, but it's something worth knowing if you want to do things on the cheap without buying a dedicated interface.
    What kind of money did you want to spend? Are you thinking super duper cheap, and then see how it goes and maybe spend more in future if you enjoy it?  Personally i would say £100-150 would get your something good to start with, like that Presonus audiobox, there's a lot of options like that available.
    My local music shop always push the alesis io2 on new users, gotta say i'm not that overly impressed with it.  Line 6 stuff will be good however, but limiting.  Although i beleive you get their software for free with it?

  • I currently use a mifi device to connect my laptops to the internet, can I use the iphone 5c as an internet access point for them

    Can the iphone 5c be used as a router to connect my laptop to the internet???

    Yes, but it depends on what plan you have.
    What plan name do you have as stated on your bill. If it says More Everything, the hotspot functionality is already included.

  • I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

    i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

    I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

    You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
    To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way.  If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
    If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
    When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

Maybe you are looking for

  • How to get rid of the loading status at the bottom

    The loading status is like how it is in chrome now. I absolutely hate that. I use the addon bar, so why can't i put it back into the addon bar. Its just additional stuff i dont need. I would also like it to be where if you hover over a link you can s

  • Add years to query

    Hi all, I have a function collecting years from another table and creating a dynamic sql statement to included all years. Also I set some variables in the where statement. At the end of the function I use execute immediate. The issue with this method

  • After two years w/o problems, T610 Synchronization Failed ...

    For about two years, I've had no problem syncing my SE T610 with Address Book and iCal. Yesterday, I synced with no problem. Today, I've been trying to sync and continually get the message: An unexpected exception occured while synchronizing the devi

  • Graphics Card Error message...

    Hello, I am experiencing a recent problem with my newly purchased MacBook Pro. (2.4GHz Intel core 2 Duo) I have FCP 4.5HD and after transfering it over to my new machine I am unable to launch it. At launch I get the error message: "This software requ

  • Bee_table element gets rendered multiple times

    Hi Everybody, i'm using a bee_table that holds a tableview an a treeview. For the tableview I implemented an iterator. Now the problem is, everytime the bee_table with its elements is rendered to string another table occurs on screen..... When i don'