SimpleTap/​Screen/Opt​ion Request/qu​ickly change between open programs
I'd like for there to be an enhancement to SimpleTap where you can easily navigate between open windows. I found that when you have the X220T in tablet mode with the screen orientation in such a way that the Task Bar/Start Menu is aligned with the side of the tablet that has the Pen its kind of hard to toggle between programs using the taskbar. This is because with the wireless bar, simpletap button and other icons it leaves room for about 2 program icons.
I was thinking that this should be an option that takes up an entire simpletap screen itself(like the question mark or hash tag). Perhaps this can be tied into Windows Aero functionality where screen shots are already taken and probably cached somewhere for open windows.
I'd like for there to be an enhancement to SimpleTap where you can easily navigate between open windows. I found that when you have the X220T in tablet mode with the screen orientation in such a way that the Task Bar/Start Menu is aligned with the side of the tablet that has the Pen its kind of hard to toggle between programs using the taskbar. This is because with the wireless bar, simpletap button and other icons it leaves room for about 2 program icons.
I was thinking that this should be an option that takes up an entire simpletap screen itself(like the question mark or hash tag). Perhaps this can be tied into Windows Aero functionality where screen shots are already taken and probably cached somewhere for open windows.
Similar Messages
-
I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?
Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance -
I have a wireless keyboard and the tab key stopped working today. I don't know if I can work effectively without the tab key. I use x.7.4
I don't have the money to purchase a new computer so I'm thinking a good workaround would be to use another key for TAB. How can I do this?If you have a Mac Mini, you just need a new keyboard. Logitech, MacAlly, and Microsoft all make Mac compatible keyboards.
iOS is not running on your machine. It is Mac OS X 10.7.4 you need to be selecting for your signature. -
HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN
Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhayHi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted. -
Hi all. A request for a change in the toolbar. Every time I do something the toolbar always changes to the last tool used. Maybe an option to have the toolbar always in the "normal" view, i.e., display all the tools? It gets annoying to keep having to tap the top icon to show the complete toolbar rather than the last tool used. Also, as I've posted previously, we need an exit button! And a question: Is there a way to center a selection? For example, when making a rectangular selection for, say, a frame, centering the selection by eye is a challenge to say the least. Is there a simple way to do that? Other than these items, I'm enjoying PS Touch a lot (although more tools would certainly be welcomed). Thanks!
Sharon: Yes, I realised that after I posted.
Alec: I know about the arrow you're referring to. There's also a back key on my tablet which will get me to the home screen (most of the apps I have on my tablet use that key to exit). So, yes, we can get to the home screen, but PS Touch will continue to run in the background.
So far, the only way I've found to actually shut it down is to use the task manager.
As for centering a selection, I've posted in the request forum.
Thank you both very much for the replies
Jack -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_locat.
Experts,
In BW, does anybody have some simple code for when on your selection-screen you have an input parameter for the location of the file you want to upload. In SAP/R3 there use to be "Perform get_local_path" to drill down thru your hard drive to find the file you want to select to upload. I am not sure what to use in BW to execute a drill down process for getting the file in a drop down window.
Thank-You!Are you trying to browse the local PC or the appliation server.
Implement the program above, give it a try. When you hit F4, you will get a file open dialog, selection your file, then click open, this will fill the pathfile into your parameter on the selection screen. IS this whay you are looking for?
You don't need to provide anything, but you can if you want. There are import parameters.
report zrich_0001.
data: ifile type filetable.
data: xfile like line of ifile.
data: return type i.
parameters: p_file type localfile.
at selection-screen on value-request for p_file.
call method cl_gui_frontend_services=>file_open_dialog
EXPORTING
<b> WINDOW_TITLE = 'Please choose a file'
* DEFAULT_EXTENSION =
DEFAULT_FILENAME = 'Test.xml'
* FILE_FILTER =
INITIAL_DIRECTORY = 'C:'
* MULTISELECTION =</b>
changing
file_table = ifile
rc = return.
read table ifile into xfile index 1.
p_file = xfile-filename.
Regards,
Rich Heilman -
How to find out if a transportation/accomodation request has been changed?
Hello all,
I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
find any field or table that lets me know there has been a change.
I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
Can you please help me with this topic? I don't know how to solve it.
Thank you very much in advance.
Best regards.Hi,
you can use trace event ST01 or using SAP standard workflow.
as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
hope it helps.
thanks. -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR not input value in input field
Dear All,
I make search help for field ARBPL in selection screen are not excepted selected value.
Code is
SELECT-OPTIONS: p_arbpl FOR zdmde-arbpl MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'P_ARBPL'
DYNPROFIELD = 'P_ARBPL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = sh_arbpl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-high.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'P_ARBPL'
DYNPROFIELD = 'P_ARBPL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = sh_arbpl.
Please tell how to input selected field from search help into input field in both low and high.
Would appreciate your reply .
Regards,
PoojaHi Pooja,
For getting the response back from the user selection , please get the return code too. Before that instead of directly using the table crhd structure.. please do create a type declaration of that table , make sure that the field that you wanted to get using search help be specified at last of declaration type like this
TYPES: BEGIN OF ty,
OBJTY TYPE CR_OBJTY,
ARBPL TYPE ARBPL,
END OF ty.
this is because the return parameter t_rtn will holds the last value of type which been selected by user.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'P_ARBPL'
DYNPROFIELD = 'P_ARBPL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = sh_arbpl
return_tab = t_rtn.
LOOP AT t_rtn INTO x_rtn .
ENDLOOP.
try executing this code.
TABLES crhd.
TYPES: BEGIN OF ty,
OBJTY TYPE CR_OBJTY,
ARBPL TYPE ARBPL,
END OF ty.
DATA: sh_arbpl TYPE TABLE OF ty.
DATA: dynpfields TYPE TABLE OF DYNPREAD,
x_dynpfields TYPE dynpread,
t_rtn TYPE STANDARD TABLE OF DDSHRETVAL ,
x_rtn TYPE DDSHRETVAL.
SELECT-OPTIONS: p_arbpl FOR crhd-ARBPL MODIF ID two.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_arbpl-low.
REFRESH sh_arbpl.
SELECT * from crhd into CORRESPONDING FIELDS OF TABLE sh_arbpl WHERE werks eq '1000'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'P_ARBPL'
DYNPROFIELD = 'P_ARBPL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = sh_arbpl
return_tab = t_rtn.
LOOP AT t_rtn INTO x_rtn .
ENDLOOP.
x_dynpfields-fieldname = 'P_ARBPL-LOW' .
x_dynpfields-fieldvalue = x_rtn-fieldval.
APPEND x_dynpfields TO dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
TABLES
dynpfields = dynpfields
* EXCEPTIONS
* INVALID_ABAPWORKAREA = 1
* INVALID_DYNPROFIELD = 2
* INVALID_DYNPRONAME = 3
* INVALID_DYNPRONUMMER = 4
* INVALID_REQUEST = 5
* NO_FIELDDESCRIPTION = 6
* UNDEFIND_ERROR = 7
* OTHERS = 8
Regards,
Sivaganesh -
i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?
brilliant
google chrome works where safari doesn't on my macbook air. many thanks
i now have an embarrassing qu. have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short. i have tried to extend it with the arrows in the bottom corners but it makes no difference. any ideas? -
At selection-screen on value-request
Hi experts,
Pls see the below code.
When ever plant is enterd in screen i have to get material no. and material group based on that plant dynamically.
I am getting F4 list of values for the first one.But For the second one i am not getting.
What may be teh problem?
*& Report ZRA_SELECTIONSCTREEN *
REPORT ZRA_SELECTIONSCTREEN .
tables: mara,marc.
parameters: p_werks like marc-werks,
p_matnr like marC-matnr,
p_matkl like mara-matkl.
data: begin of it_matnr occurs 0,
matnr like mara-matnr,
end of it_matnr.
data: begin of it_matkl occurs 0,
matkl like mara-matkl,
end of it_matkl.
at selection-screen on value-request for p_matnr.
select matnr into table it_matnr from marc where werks = p_werks.
if not it_matnr[] is initial.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MATNR'
PVALKEY = ' '
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'p_matnr'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = it_matnr
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
select matkl from mara into table it_matkl for all entries IN it_matnr
WHERE MATNR = IT_MATNR-MATNR.
if not it_matkl[] is INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MATKL'
PVALKEY = ' '
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'p_matkl'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MATKL
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Regards
Ravi.hi
good
i tried your report, f4 help is coming for all the fields but dynamic field selection is ot coming because ther eis a prob with your select statment,
you select the data from the database table for the another two fields as the value you r entering for werks(plant).
thanks
mrutyun^ -
AT SELECTION-SCREEN ON VALUE-REQUEST needed
hi,
i want code for atselection-screen for one parameter.
pls check the code i am sending.i am not understanding that if any one knows pls explain me.and it is correct or not.
parameters: P_LDCTY(2).
DATA: BEGIN OF IHELP_FIELDS OCCURS 20.
INCLUDE STRUCTURE HELP_VALUE.
DATA: END OF IHELP_FIELDS.
DATA: BEGIN OF HELPTAB OCCURS 100,
FELD(50),
END OF HELPTAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LDCTY matchcode object ZSDOTC_VOYAGE.
REFRESH IHELP_FIELDS.
MOVE 'VBAK' TO IHELP_FIELDS-TABNAME.
MOVE 'ZZLOADCTY1' TO IHELP_FIELDS-FIELDNAME.
MOVE 'X' TO IHELP_FIELDS-SELECTFLAG.
APPEND IHELP_FIELDS.
REFRESH HELPTAB.
SELECT *
FROM ZPORT
ORDER BY ZZCNTRY INTO IHELP_FIELDS.
MOVE ZPORT-ZZCNTRY TO HELPTAB.
APPEND HELPTAB.
ENDSELECT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
EXPORTING
DISPLAY = ' '
FIELDNAME = 'ZZCNTRY'
TABNAME = 'ZPORT'
IMPORTING
SELECT_VALUE = SELECTED_VALUE
TABLES
FIELDS = IHELP_FIELDS
VALUETAB = HELPTAB
EXCEPTIONS
FIELD_NOT_IN_DDIC = 01
MORE_THEN_ONE_SELECTFIELD = 02
NO_SELECTFIELD = 03.
IF SELECTED_VALUE <> SPACE.
P_LDCTY = SELECTED_VALUE.
ENDIF.
pls help mein this issue.
points will be awarded for right answer,
thanks and regards
suneethaHi suneetha,
1. we have to juse like this.
2. a) use FM F4IF_INT_TABLE_VALUE_REQUEST
b) syntax is : AT SELECTION-SCREEN ON VALUE-REQUEST FOR MYFIELD.
3. just copy paste in new program.
4.
Hi prakash,
1. sample code (just copy paste)
2.
REPORT ABC.
DATA : BEGIN OF ITAB OCCURS 0,
UNAME LIKE USR01-BNAME,
END OF ITAB.
data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .
data : RETURN_wa LIKE DDSHRETVAL .
PARAMETERS : A(12) TYPE C.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR A.
ITAB-UNAME = 'U01'. APPEND ITAB.
ITAB-UNAME = 'U02'. APPEND ITAB.
ITAB-UNAME = 'U03'. APPEND ITAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'ITAB-UNAME'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'A'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = ITAB
FIELD_TAB = FTAB
RETURN_TAB = return_tab
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
break-point.
regards,
amit m. -
Problem in at selection-screen on value request
hi friends ,
i want to display f4 help for a field in a popup. this i can do, but this popup comes based on values
i entered in other screen fields . but these values are not updated to screen values when i trigger f4.Hi,
DATA: T_DYNPRO TYPE TABLE OF DYNPREAD,
WA_DYNPRO LIKE LINE OF T_DYNPRO,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PARAM.
WA_DYNPRO-FIELDNAME = 'Screen Field Name'.
APPEND WA_DYNPRO TO T_DYNPRO.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = T_DYNPRO
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE T_DYNPRO INTO WA_DYNPRO WITH KEY FIELDNAME = 'Screen Field Name'.
TEMP = WA_DYNPRO-FIELDVALUE.
" Select the values based on Temp and populate your internal table for F4 help using the Screen value Temp
"Call 'F4IF_INT_TABLE_VALUE_REQUEST' and display the pop up. -
Screen resolution changes after opening PDF in preview and is enlarged.
Screen resolution changes after opening PDF in Preview and is enlarged.
Do a backup.
Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution. -
Problem using At Selection Screen on value request for *"Select Fieldname"*
Hi All,
I Have a requirement of passing mutiple paraters value or selection option values in selection screen.
For Eg :I Have -
*--- Selection Screen
Select-options : s1 for vbak-vbeln ,
s2 for vbap-posnr.
*--- At Selection Screen
At Selection Screen on value request for s1-low.
i need to pass S1-low as well as S2-low ...
i.e first item of the Sales Document.
Value is getting passed in S1-low but not in S2-low
Can anybody help me on this ...
Thanks in Advance ..Hi,
Make use of the FM "F4IF_INT_TABLE_VALUE_REQUEST" for the value request for the first field.
Use the "FIELD_MAPPING" in the tables parameter of the above FM.
Please go through the FM documentation.
Hope this will help you.
Regards,
Smart Varghese -
Invalid request for a change in window state
Ok...
Creating a JSR168 portlet and it works fine in Pluto, but I get the following when I deploy to P7:
ERROR: Content not available. REASONE: Invalid request for a change in window state
Here is what the portlet is supposed to do:
* Display a form
* User clicks find
* Lookup is performed
* Window state in processAction() method of portlet is changed to MAXIMIZED
* I'm guessing this is where the error is occuring
I also think that for the TableContainer, I have some sort of attribute incorrect having to do with one of the channelsIs values.
I tried toggling them one way or another without any effect.
Suggestions?Ive run into this issue also. I need a way for a portlet to change to its maximized state for the purposes of user registration. Is there anyway this can be done? I know that sun jsp "Providers" which are shown on their example desktop, have some sort of maximized state that they can go into, but im not sure how to use this in a portlet.
There seems to be very inconsistent support between the proprietary sun provider api, and the portlet api.
Maybe you are looking for
-
Very weird audio glitch! Any ideas?
When I command-click to draw blank recording space, if it's too close to the beginning of the timeline it shifts every other pre-recorded layer over one measure but keeps the audio only in the same place. So the result is the playback sound does not
-
Why is the volume so low?
I'm getting very low volume with iMovie HD 6 on my MacBook Pro. This problem only started recently. Other audio applications are fine, e.g., iDVD 7.0.3 plays the iMovie projects fine when I render them. I tried reinstalling iMovie, but that didn't he
-
Warranty Mess! Whats going on Lenovo???
I bought my W520 weeks ago, and i love it, its the best laptop i ever had. BUT. I bought the extended 2 year ONsite Warranty with it, bought at the moment itself of getting the computer. The warranty still does not show anywhere, neither in account,
-
i have been using an epson stylus photo 2200 for many years and have been getting decent results printing 13x19 images from Aperture. recently, i finally got an upgrade to the colormunki design software that allowed me to do a good calibration of the
-
Remaining Net Book Value after Settlement and Depreciation Run
Experts, I have an AUC Asset that has not been settled for two years. After recording additional current year expenses to the AUC (F-90) in December, running depreciation for area 01, and settling the asset to another fixed asset, the December depre