Sims 2 install
i can't get sims 2 application to work---i get a message that the program needs at least 1 mb of space and that i should free up some hard drive space. but my hard drive shows (on finder) that i have 30 gb of space. any advice would be appreciated.
Contact the tech support for Sims 2 to see what they recommend.
Similar Messages
-
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
How do I remove an informational message that repeatedly appears on the center of my screen of the refurbished iPad that I am trying to set up. The message is "No SIM card installed."
Hi Saddledoc,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are getting a message that the iPad has No SIM Card installed. I would recommend that you read this article, it may be able to help the issue.
If you see 'No SIM' alert on iPhone - Apple Support
Cheers,
Mario -
There is no SIM card installed after IOS update on 3GS
Hey!
I just upgraded my iPhone 3GS to iOS 5. All went well, then at the end, it asks me a few set ups (like language, Location, and WiFi settings).
After that, it attempts to activate, and fails, giving me the following error in iTunes: "There is no SIM card installed in the iPhone you are attempting to activate."
Problem is, there IS a SIM card in the phone, I tried taking it out, and putting it back in, tried with another SIM, tried the SIM in another phone, worked fine, just not the iPhone!
I would appreciate any help!
Also, the phone was Jailbroken before, and the SIM worked fine. Just not now, when it tries to activate.
IS IT POSSIBLE TO GO BACK TO THE BEST PREVIOUS UPDATE OF IOS4. THAT"S ALL I EXPECT NOW!@wendy191,
Have you jailbroken your phone before?
If you have, I don't see any way you could go back to IOS4 (4.3.3 or 4.3.5) (However, experts might be able to help you)
When you jailbreak you iPhone you update your baseband to iPad's Baseband i.e. 6.50 (something like that) & once that happens there's no going back (at least a legitimate way) unless you do what this guy says.
http://www.youtube.com/watch?v=aNK_ZXqF6r0
Watch this video on youtube. Listen to what he says & you can surely get through the activation. -
I have a new IPhone 6 just went to the store last Saturday to connect it, (I am replacing my IPhone 5s) it says that I am updated on IOS 8.0.2 but now started to show a message that reads like this: " No SIM card installed" and I have no phone line or anything, my carrier is Sprint and I just got back from there and they told me that this is something I have to deal with APPLE because they have nothing to do with software. Anybody experiencing the same thing? any light in the tunnel? HELP....
Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H. -
ATT Iphone 6 intermittently says no sim card installed, but works the rest of the time. thoughts?
ATT Iphone 6 intermittently says no sim card installed, but works the rest of the time. thoughts?
Had a simalar problem. But we weren't getting any service. AT&T said it was a defective SIM card and pretty much everyone that bought an AT&T iPhone 6 from the online store had a defective sim. had to buy a new sim from best buy because att were sold out because the problem was so wide spread.
-
I have tried to update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country
Hi Allan,
Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743 -
I just got a new iphone 4 because my old one did work, when i tried activating the new one it give me problems and wont let me do anything on the phone. When i plug it into itunes i get a message there is no sim card installed in this device. Is there anyway i can restore the phone or anything to get it working?
Then something is wrong with the new iPhone 4. Call AppleCare or make an appointment at an Apple store of there is one nearby.
-
AT&T Unlock iPhone 4 without a Sim Card installed question
I just put in my request to unlock my iPhone 4 from AT&T.
My contract has expired, and my old phone number is no longer active as of about 2 weeks ago, I also no longer live in the US (I've already travelled abroad), but they said that it would have no problem to unlock my iPhone as it's all done via iTunes.
I still have my old AT&T Sim card, but the number is not activate and like I said I'm in another country.
I have heard for the unlock process to be completed you need an activate sim card installed in the phone. Does it matter what carrier's sim I use (can I use a local one?) or does it absolutely have to be an AT&T sim?
I'm in Dubai now and have an active prepaid du sim card (they said it can easily be cut to micro-sim).
Contacing AT&T from here is a nightmare (the "international" number they gave me won't dial out and the website won't let me access my old account info since it's closed now and thus can't access their web chat either).From another poster in the Communities:
Stipulations
• Phone must be off contract or you must be in the military traveling abroad.
• Account must be in good standing for the last 30 days.
• You must have valid email or phone number where you can be reached when the unlock is completed by Apple.
How it works:
1. Call AT&T at 1-800-331-0500 and go through the prompts to get to a customer service agent
2. Have your IMEI # ready along with your active email address and current phone number
3. If your phone qualifies then AT&T will submit a request to Apple to authorize the unlock on your phone. (AT&T will tell you right then on the phone if it can be done )
4. Make sure you get your case number in the event something doesn't go through so you can get support from AT&T.
5. Once you recieve the email from Apple, open iTunes and transfer purchases, backup your phone and then perform a restore.
6. Once this process is complete your phone should now be unlocked to use other carriers.
It will be up to you to find a way to call a US 800 number from outside the country; do a web search and you should find suggestions.
Regards. -
I upgraded my 3gs to the iOS5 software, but it keeps telling me on my iphone and my itunes that it cannot activate my iphone! Then my iTunes said there is no SIM card installed. HELP! I can't seem to even restore, which is what I was told to do by the Apple Store.
Hi there,
if your phone has ever been replaced by Apple (within or outside of warranty), have Apple check their records to which carrier your iPhone (its IMEI number) is currently locked to.
If it is locked to any other than the carrier you have your SIM-card from, ask the folks at Apple to have your phone's lock adjusted to your carrier. Once that is done, there is a good chance that your phone will work again.
Hope this helps,
Chris -
I have an iphone 3GS that I have inactivated as of today. I still wish to sync this phone with iTunes (did a restore as I transferred my data to a new iPhone). However, iTunes is giving me an error message that there is no SIM card installed in the iPhone I'm attempting to activate. I've powered off the phone, held the power button & home button until iTunes popped up with restore note. Re-did the restore (twice) but still coming up with same error message.
Kind of what I figured.....will I be able to sync to iTunes in future as many times as I want without the SIM card (once it's activated again)?
-
I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
AnushkaVirgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone... -
hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring, iTunes say me "there is no sim card installed in the iphone you are attempting to activate."
sorry. you cannot discuss and find solution about the jailbroken phones in this forum.
Maybe you are looking for
-
Print to video not functioning - help?
Trying to output a finished vid to my Panasonic AG-DVC30. Print to Vid command activates the camera, and it records... but the screen remains blue, and nothing is recorded on the dv tape. A poster named Hotzeug posted the same problem with his Canon,
-
ITunes 11.0.1 podcasts: exclamation mark, not downloading
Since updating iTunes to 11.0.1, I've noticed that when a podcast I follow becomes available, instead of downloading, there is an encircled exclamation mark/point to the left of that episode's title, and the download-arrow-button still appears to the
-
JMS, MQ WebSphere messagesplit and commit scope
Dear all I have a problem regarding read/write to WebSphere MQ. I'm sending messages from ERP to XI to MQ Websphere. There is a twist on my scenario. When XI receive a message from ERP XI creates 3 messages: Begin, Data and End. This is because the r
-
Trouble copying cloning XMLDocument
I'm trying to create a copy of an XMLDocument called docA by taking a clone of it's document node and appending it to a second XMLDocument called docB. this statement XMLDocument docA= new XMLDocument(); docB.appendChild(docA.cloneNode(true)); throws
-
Epass , govt. of canada website, no safarians
This is the error I receive when accessing : http://www.cra-arc.gc.ca/eservices/tax/individuals/myaccount/register-e.html Warning to Mac Safari users Unfortunately, access to epass Canada using a Mac Safari browser is temporarily unavailable. A recen