Simulate ECG Signal Source will not install from BME Startup Kit
Hi, I'm having a problem getting all the VIs that are supposed to be provided with the BME Startup Kit to install, namely the Simulation ECG Signal Source VI. I have the two toolkits, Vision, and DAQmx driver installed. When I go to try to used the VI, there is a large question mark where the selection button normally is for a VI, and the VI does not show up in the Biomedical pallette directory. Can someone please give me some insight as to what might be the problem? If you need more information, I'd be happy to provide it.
Thanks!!
i have download biomedical startup kit for labview 8.5 and i use professional development system versions but i can't access Simulate ECG Signal.vi they just only ? simbol (look attachment files). why i can't access them maybe someone can explain that and help me to solve this problem cause i really need that. can labview 8.0 professional development system versions use biomedical startup kit if yes can someone tell me what is the address.tanx
Message Edited by marp84 on 06-09-2008 09:29 PM
Attachments:
ecg.JPG 58 KB
Similar Messages
-
I recently wiped my main drive using zero-data process. It seems to be "okay" when verifying its integrity. It is also "verified" according to S.M.A.R.T.
10.6 from Apple's Installation Disc will not install. It makes 20 estimated minutes remaining, then tells me it cannot copy necessary files. Is my superdrive defective out-of-box and also a year later or is my installation disc a defect? Online communities fail to provide any other causes.
By the way, using Recovery HD to download and install Lion is a failure. It tried three times, each ending in failure, unable to verify said package. Apple, try harder.
[email protected]I think my superdrive might be defective. It ratchets an awful lot while trying to copy necessary files for installing Snow Leopard. I am taking to a Genius Bar, running a hardware test consistently gets locked up. Here is more on that!:
Inserted retail Hardware Test disc, booted holding D.
Probing took 12 hours and counting, I hard reset my computer.
(Suggested by others) I unplugged my Logitech mouse and, wow!, probing completed.
During pass one of mem test, it locked up showing no progress for an hour-- hard reset!
Apple's Hardware Test was a total failure on my end. An ethernet connection to a router and my Apple keyboard were the only things connected to my 2011 iMac while booting to this hardware test! Bummer! I trust my Apple team will have better diagnostic equipment.
Can Apple Hardware Test even determine if an iMac's superdrive is bad? -
Iphone will not install from App store
I have a problem where my iphone will not install apps from the appstore.
Description:
If I select to install an app in appstore i get prompted for my password. When password is entered no installation starts, but after a brief moment the button to install the app is highlighted again as it were before I pressed it. The app never gets installed.
- I tried with several different apps with the same result.
- I am running IOS6.0 (10A403).
- 5GB free space on the phone
- I am positive that the apple ID password is entered correctly. I changed it twice to see if it made any difference, but no luck, and I also tried entering a faulty password. Withe the faulty password I got a dialogue saying the password is wrong. This dialogue does not appear with the correct password.
- I restarted the phone. No luck with that either.
- Phone is an Iphone 4 100% original.
Any suggestions for a solution?
/PeterCan you download the games in iTunes on your computer?
Do you have any restrictions set up in Settings/General/Restrictions that prevent you from installing apps or certain apps? -
IE 10 will not install from WSUS
I have the latest WSUS running on Server 2008 R2 and about 300 Win7 x64 PC. I initially blocked IE10 by not approving it. But now I have approved it and it will not install. The status per machine is "not applicable".
I have NOT used any "block IE10" tool at the PC level.
I have NOT used any "block IE10" tool at the group policy level.
All I did was "Not approve" it and then several weeks later "Approve it".
Any ideas?
TRLI am having the exact same issue. It looks like the import is not downloading the files. This is the information I've obtained in my troubleshooting so far.
I am receiving the following errors when installing IE10 through WSUS. I have imported the update from Microsoft's Update Catalog (on 4-11-2013), then approved the update to testing & pilot groups. The following errors occur when the clients
try to install IE10 from WSUS. They do not occur when installing from the internet through Microsoft's servers. From everything I can see through the log files, there are no installation files on the WSUS server. Is there any way to manually
add them, or re-import the update? Perhaps through a SQL query?
Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7.
After importing the update into WSUS, nothing new was synchronized to the server. When right clicking on the IE10 updates, and going to 'File Information', the only files shown with a modified date of 4-11-2013 are ~4kb *.txt files. There are
no executables.
The following are a log excerpt when installing from WSUS, with bolded information to highlight what I believe are problems:
WindowsUpdate.log
2013-04-14 01:00:12:869 1180 c90 AU #############
2013-04-14 01:00:12:869 1180 c90 AU ## START ## AU: Search for updates
2013-04-14 01:00:12:869 1180 c90 AU #########
2013-04-14 01:00:12:869 1180 c90 AU <<## SUBMITTED ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:12:869 1180 4f8 Agent *************
2013-04-14 01:00:12:869 1180 4f8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:00:12:869 1180 4f8 Agent *********
2013-04-14 01:00:12:869 1180 4f8 Agent * Online = Yes; Ignore download priority = No
2013-04-14 01:00:12:869 1180 4f8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-04-14 01:00:12:869 1180 4f8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-04-14 01:00:12:869 1180 4f8 Agent * Search Scope = {Machine}
2013-04-14 01:00:12:869 1180 4f8 Setup Checking for agent SelfUpdate
2013-04-14 01:00:12:885 1180 4f8 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-04-14 01:00:12:916 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-04-14 01:00:13:697 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:494 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-04-14 01:00:17:526 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:572 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-04-14 01:00:17:619 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:619 1180 4f8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-04-14 01:00:17:635 1180 4f8 Misc Microsoft signed: Yes
2013-04-14 01:00:17:713 1180 4f8 Setup Determining whether a new setup handler needs to be downloaded
2013-04-14 01:00:17:729 1180 4f8 Setup SelfUpdate handler is not found. It will be downloaded
2013-04-14 01:00:17:729 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:729 1180 4f8 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:729 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:760 1180 4f8 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:760 1180 4f8 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2013-04-14 01:00:17:807 1180 4f8 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2013-04-14 01:00:17:807 1180 4f8 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-04-14 01:00:18:776 1180 4f8 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-04-14 01:00:18:776 1180 4f8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://*****:8530/ClientWebService/client.asmx
2013-04-14 01:00:19:432 1180 4f8 PT WARNING: Cached cookie has expired or new PID is available
2013-04-14 01:00:19:432 1180 4f8 PT Initializing simple targeting cookie, clientId = a6aa9dc9-dc78-4bcb-b23b-de6d377f3cb2, target group = Testbed, DNS name = ****.****.com
2013-04-14 01:00:19:432 1180 4f8 PT Server URL = http://*****:8530/SimpleAuthWebService/SimpleAuth.asmx
2013-04-14 01:00:27:213 1180 4f8 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2013-04-14 01:00:27:213 1180 4f8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://*****:8530/ClientWebService/client.asmx
2013-04-14 01:00:28:229 1180 4f8 Agent * Added update {87E13ECB-C669-43BE-9E2A-01E567285031}.203 to search result
2013-04-14 01:00:28:229 1180 4f8 Agent * Found 1 updates and 69 categories in search; evaluated appl. rules of 756 out of 1007 deployed entities
2013-04-14 01:00:28:260 1180 4f8 Agent *********
2013-04-14 01:00:28:260 1180 4f8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:00:28:260 1180 4f8 Agent *************
2013-04-14 01:00:28:291 1180 3f0 AU >>## RESUMED ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:28:291 1180 3f0 AU # 1 updates detected
2013-04-14 01:00:28:291 1180 3f0 AU #########
2013-04-14 01:00:28:291 1180 3f0 AU ## END ## AU: Search for updates [CallId = {58A7FACD-FF0E-49B7-BDF1-656D17B98938}]
2013-04-14 01:00:28:291 1180 3f0 AU #############
***Notice: there is no 'Download' section:***
2013-04-14 01:00:28:307 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:00:28:307 1180 3f0 AU Featured notifications is disabled.
2013-04-14 01:00:28:307 1180 3f0 AU AU setting next detection timeout to 2013-04-15 03:52:00
2013-04-14 01:00:28:323 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:00:33:229 1180 4f8 Report REPORT EVENT: {94640381-460D-4C10-8325-77979804D8A8} 2013-04-14 01:00:28:229-0600 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 1 updates.
2013-04-14 01:00:33:229 1180 4f8 Report REPORT EVENT: {FC1B6FAB-E6F1-40E2-B12C-8C3E192032BD} 2013-04-14 01:00:28:260-0600 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2013-04-14 01:00:33:229 1180 4f8 Report CWERReporter finishing event handling. (00000000)
2013-04-14 01:00:36:260 1180 a58 DnldMgr Preparing update for install, updateId = {497DC29B-53B4-437B-81C1-92F0E5946E4B}.203.
2013-04-14 01:00:36:760 756 804 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0600) ===========
2013-04-14 01:00:36:760 756 804 Misc = Process: C:\Windows\system32\wuauclt.exe
2013-04-14 01:00:36:760 756 804 Misc = Module: C:\Windows\system32\wuaueng.dll
2013-04-14 01:00:36:760 756 804 Handler :::::::::::::
2013-04-14 01:00:36:760 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:36:760 756 804 Handler :::::::::
2013-04-14 01:00:36:760 756 804 Handler : Updates to install = 1
2013-04-14 01:00:42:338 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:42:338 756 804 Handler :::::::::
2013-04-14 01:00:42:338 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:42:338 756 804 Handler :::::::::::::
2013-04-14 01:00:42:370 1180 a58 DnldMgr Preparing update for install, updateId = {4A2D8132-7DA3-4B00-A37C-C004B77BA4CB}.203.
2013-04-14 01:00:42:635 756 804 Handler :::::::::::::
2013-04-14 01:00:42:635 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:42:635 756 804 Handler :::::::::
2013-04-14 01:00:42:635 756 804 Handler : Updates to install = 1
2013-04-14 01:00:44:198 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:44:198 756 804 Handler :::::::::
2013-04-14 01:00:44:198 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:44:198 756 804 Handler :::::::::::::
2013-04-14 01:00:44:198 1180 a58 DnldMgr Preparing update for install, updateId = {F50DB706-BA83-4247-800D-89BFE2FBCBBF}.203.
2013-04-14 01:00:44:307 756 804 Handler :::::::::::::
2013-04-14 01:00:44:307 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:44:307 756 804 Handler :::::::::
2013-04-14 01:00:44:307 756 804 Handler : Updates to install = 1
2013-04-14 01:00:45:229 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:45:229 756 804 Handler :::::::::
2013-04-14 01:00:45:229 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:45:229 756 804 Handler :::::::::::::
2013-04-14 01:00:45:245 1180 a58 DnldMgr Preparing update for install, updateId = {2C886B27-09D4-4DE3-8BBC-1EB5CD5BC76A}.203.
2013-04-14 01:00:45:276 756 804 Handler :::::::::::::
2013-04-14 01:00:45:276 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:45:276 756 804 Handler :::::::::
2013-04-14 01:00:45:276 756 804 Handler : Updates to install = 1
2013-04-14 01:00:45:932 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:45:932 756 804 Handler :::::::::
2013-04-14 01:00:45:932 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:45:932 756 804 Handler :::::::::::::
2013-04-14 01:00:45:948 1180 a58 DnldMgr Preparing update for install, updateId = {516C5430-1639-460B-A8D8-53BA47211610}.203.
2013-04-14 01:00:45:963 756 804 Handler :::::::::::::
2013-04-14 01:00:45:963 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:45:963 756 804 Handler :::::::::
2013-04-14 01:00:45:963 756 804 Handler : Updates to install = 1
2013-04-14 01:00:46:463 756 804 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2013-04-14 01:00:46:463 756 804 Handler :::::::::
2013-04-14 01:00:46:463 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:00:46:463 756 804 Handler :::::::::::::
2013-04-14 01:00:46:463 1180 a58 DnldMgr Preparing update for install, updateId = {822B837F-FFF0-44A8-9244-1AA8A0D77F7C}.203.
2013-04-14 01:00:47:416 756 804 Handler :::::::::::::
2013-04-14 01:00:47:416 756 804 Handler :: START :: Handler: Command Line Install
2013-04-14 01:00:47:416 756 804 Handler :::::::::
2013-04-14 01:00:47:416 756 804 Handler : Updates to install = 1
2013-04-14 01:01:21:464 756 804 Handler : WARNING: Command line install completed. Return code = 0x00009c47, Result = Failed, Reboot required = false
2013-04-14 01:01:21:464 1180 3f0 AU >>## RESUMED ## AU: Installing update [UpdateId = {87E13ECB-C669-43BE-9E2A-01E567285031}]
2013-04-14 01:01:21:464 756 804 Handler : WARNING: Exit code = 0x8024200B
2013-04-14 01:01:21:464 1180 3f0 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C47
2013-04-14 01:01:21:464 756 804 Handler :::::::::
2013-04-14 01:01:21:464 756 804 Handler :: END :: Handler: Command Line Install
2013-04-14 01:01:21:464 756 804 Handler :::::::::::::
2013-04-14 01:01:21:510 1180 a58 Agent *********
2013-04-14 01:01:21:510 1180 3f0 AU Install call completed.
2013-04-14 01:01:21:510 1180 a58 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:21:510 1180 3f0 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-04-14 01:01:21:510 1180 a58 Agent *************
2013-04-14 01:01:21:510 1180 3f0 AU #########
2013-04-14 01:01:21:510 1180 3f0 AU ## END ## AU: Installing updates [CallId = {612023CC-6538-4722-9742-5FD88A9CB328}]
2013-04-14 01:01:21:510 1180 3f0 AU #############
2013-04-14 01:01:21:510 1180 3f0 AU Install complete for all calls, reboot NOT needed
2013-04-14 01:01:21:510 1180 3f0 AU Setting AU scheduled install time to 2013-04-15 07:00:00
2013-04-14 01:01:21:510 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:01:21:510 1180 3f0 AU Successfully wrote event for AU health state:0
2013-04-14 01:01:21:510 1180 3f0 AU Triggering Offline detection (non-interactive)
2013-04-14 01:01:21:510 1180 c90 AU #############
2013-04-14 01:01:21:510 1180 c90 AU ## START ## AU: Search for updates
2013-04-14 01:01:21:510 1180 c90 AU #########
2013-04-14 01:01:21:526 1180 c90 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:21:526 1180 4f8 Agent *************
2013-04-14 01:01:21:526 1180 4f8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:21:526 1180 4f8 Agent *********
2013-04-14 01:01:21:526 1180 4f8 Agent * Online = No; Ignore download priority = No
2013-04-14 01:01:21:526 1180 4f8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-04-14 01:01:21:526 1180 4f8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-04-14 01:01:21:526 1180 4f8 Agent * Search Scope = {Machine}
2013-04-14 01:01:26:698 1180 4f8 Agent * Added update {87E13ECB-C669-43BE-9E2A-01E567285031}.203 to search result
2013-04-14 01:01:26:698 1180 4f8 Agent * Found 1 updates and 69 categories in search; evaluated appl. rules of 617 out of 1007 deployed entities
2013-04-14 01:01:26:698 1180 4f8 Agent *********
2013-04-14 01:01:26:698 1180 4f8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-04-14 01:01:26:698 1180 4f8 Agent *************
2013-04-14 01:01:26:745 1180 3f0 AU >>## RESUMED ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:26:745 1180 3f0 AU # 1 updates detected
2013-04-14 01:01:26:745 1180 4f8 Report REPORT EVENT: {F08F242D-B9C4-42EA-94A4-DD77F772F6BA} 2013-04-14 01:01:21:464-0600 1
195 101 {87E13ECB-C669-43BE-9E2A-01E567285031} 203 80070643 AutomaticUpdates Failure Content Install Installation
Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7.
2013-04-14 01:01:26:745 1180 3f0 AU #########
2013-04-14 01:01:26:745 1180 3f0 AU ## END ## AU: Search for updates [CallId = {4CC39288-6E0C-4F19-ADEC-FAC9B9B68424}]
2013-04-14 01:01:26:745 1180 3f0 AU #############
IE10_main.log
00:00.000: ====================================================================
00:00.219: Started: 2013/04/14 (Y/M/D) 01:00:49.057 (local)
00:00.250: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.266: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE10-Windows7-x86.exe" /WSUS
00:00.297: INFO: Setup installer for Internet Explorer: 10.0.9200.16521
00:00.375: INFO: Previous version of Internet Explorer: 9.0.8112.16476
00:00.391: INFO: Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.422: INFO: ...and 10.1.0.0...
00:00.453: INFO: Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.485: INFO: iexplore.exe version check success. Install can proceed.
00:00.500: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.563: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.610: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.641: INFO: Trying to extract ID: 6006 (0) as "IE10-neutral.Extracted.cab"
00:00.813: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.953: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE14D3E.tmp\Spelling_en.msu.
00:01.016: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:01.047: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE14D3E.tmp\Hyphenation_en.msu.
00:01.094: INFO: Trying to extract ID: 6128 (1033) as "IE10-support.cab"
00:02.219: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE14D3E.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE14D3E.tmp\HardwareBlockingList.xml"
00:03.328: INFO: Hardware support check succeeded. Installation will continue.
00:03.406: INFO: Windows 7 operating system detected.
00:03.469: INFO: Service pack major: 1
00:03.516: INFO: Service pack minor: 0
00:03.531: INFO: Service pack name: Service Pack 1
00:03.563: WARNING: Checking version for C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll. The file does not exist.
00:03.578: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18113 >= 6.1.7601.17727 (True)
00:03.656: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
00:03.688: INFO: Version Check for (KB2731771) of C:\Windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
00:03.750: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:03.875: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:26.656: INFO: Setup exit code: 0x00009C47 (40007) - Required updates failed to download.
00:26.844: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
00:31.922: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm" with error: 2147500036
00:32.031: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE14D3E.tmp
00:32.156: INFO: Unable to remove directory C:\Windows\TEMP\IE14D3E.tmp, marking for deletion on reboot.
00:32.281: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
The following are excerpts when installing from the Internet:
WindowsUpdate.log
***Truncated information to fit in post***
***Notice: This section is not present when using WSUS***
2013-05-08 10:32:05:573 1148 58c AU ## START ## AU: Download updates
2013-05-08 10:32:05:573 1148 58c AU #########
2013-05-08 10:32:05:573 1148 58c AU # Approved updates = 1
2013-05-08 10:32:05:589 1148 58c AU AU initiated download, updateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}.203, callId = {AE199656-7E10-4EB7-B24E-BEC6A3A56ABC}
2013-05-08 10:32:05:589 1148 58c AU # Pending download calls = 1
2013-05-08 10:32:05:589 1148 58c AU <<## SUBMITTED ## AU: Download updates
2013-05-08 10:32:05:589 1148 590 DnldMgr *************
2013-05-08 10:32:05:589 1148 590 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2013-05-08 10:32:05:589 1148 590 DnldMgr *********
2013-05-08 10:32:05:589 1148 590 DnldMgr * Call ID = {AE199656-7E10-4EB7-B24E-BEC6A3A56ABC}
2013-05-08 10:32:05:589 1148 590 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2013-05-08 10:32:05:589 1148 590 DnldMgr * Updates to download = 1
2013-05-08 10:32:05:589 1148 590 Agent * Title = Internet Explorer 10 for Windows 7
2013-05-08 10:32:05:589 1148 590 Agent * UpdateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}.203
2013-05-08 10:32:05:589 1148 590 Agent * Bundles 6 updates:
2013-05-08 10:32:05:589 1148 590 Agent * {F03964C0-E029-4033-9D69-1583A40EB317}.203
2013-05-08 10:32:05:589 1148 590 Agent * {A86D9C79-A43B-4B11-A74B-EA13F21926F2}.203
2013-05-08 10:32:05:589 1148 590 Agent * {B765BC98-D278-46D7-9BE7-23EBA0DB3491}.203
2013-05-08 10:32:05:589 1148 590 Agent * {0DE3BD6A-2848-4791-968E-6DB43BEAC578}.203
2013-05-08 10:32:05:589 1148 590 Agent * {35E2AD10-DAEF-4301-8C15-6BCC080604FA}.203
2013-05-08 10:32:05:589 1148 590 Agent * {4B24E051-669D-44D1-B920-7F123F0D6728}.203
2013-05-08 10:32:05:589 1148 58c AU Getting featured update notifications. fIncludeDismissed = true
2013-05-08 10:32:05:589 1148 58c AU No featured updates available.
2013-05-08 10:32:05:589 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {F03964C0-E029-4033-9D69-1583A40EB317}.203] ***********
2013-05-08 10:32:05:620 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:620 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {A86D9C79-A43B-4B11-A74B-EA13F21926F2}.203] ***********
2013-05-08 10:32:05:745 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:745 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {B765BC98-D278-46D7-9BE7-23EBA0DB3491}.203] ***********
2013-05-08 10:32:05:792 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:792 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {0DE3BD6A-2848-4791-968E-6DB43BEAC578}.203] ***********
2013-05-08 10:32:05:808 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:808 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {35E2AD10-DAEF-4301-8C15-6BCC080604FA}.203] ***********
2013-05-08 10:32:05:823 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:05:823 1148 590 DnldMgr *********** DnldMgr: New download job [UpdateId = {4B24E051-669D-44D1-B920-7F123F0D6728}.203] ***********
2013-05-08 10:32:06:464 1148 590 DnldMgr * All files for update were already downloaded and are valid.
2013-05-08 10:32:06:464 1148 590 Agent *********
2013-05-08 10:32:06:464 1148 c9c AU >>## RESUMED ## AU: Download update [UpdateId = {C0B3230A-BB79-4E44-B771-177BC224FCBF}, succeeded]
2013-05-08 10:32:06:464 1148 590 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2013-05-08 10:32:06:464 1148 590 Agent *************
2013-05-08 10:32:06:464 1148 c9c AU #########
2013-05-08 10:32:06:480 1148 c9c AU ## END ## AU: Download updates
2013-05-08 10:32:06:480 1148 c9c AU #############
***Truncated information to fit in post***
2013-05-08 10:35:51:050 1148 b98 Agent *************
2013-05-08 10:35:51:050 1148 c9c AU # WARNING: Install call completed, reboot required = Yes, error = 0x00000000
2013-05-08 10:35:51:050 1148 c9c AU #########
2013-05-08 10:35:51:050 1148 c9c AU ## END ## AU: Installing updates [CallId = {434D372F-F4C2-4217-8413-EC8BB8E9B386}]
2013-05-08 10:35:51:050 1148 c9c AU #############
IE10_main.log
***Truncated information to fit in post***
***The following lines are not present when using WSUS****
00:10.594: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab
00:10.750: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab
00:11.016: INFO: Waiting for 0 prerequisite downloads.
00:34.688: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
00:35.579: INFO: No reboot logic message NrApiStart(0), lParam=0x00082650 returned 0x00000000.
00:36.922: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
00:36.954: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
00:36.985: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE157EF.tmp\IE10-neutral.Downloaded.cab
00:37.047: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE10-neutral.Downloaded.cab /quiet /norestart
01:45.750: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
01:45.813: INFO: Setting registry to check if Internet Explorer is the default browser on first run: SUCCESS.
01:45.844: INFO: Preparing to install Spelling_en.msu using C:\Windows\TEMP\IE157EF.tmp\Spelling_en.msu
01:45.922: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\Spelling_en\Windows6.2-KB2764916-x86.cab /quiet /norestart
02:18.235: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:18.282: INFO: Preparing to install Hyphenation_en.msu using C:\Windows\TEMP\IE157EF.tmp\Hyphenation_en.msu
02:18.344: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\Hyphenation_en\Windows6.2-KB2764913-x86.cab /quiet /norestart
02:48.672: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:48.704: INFO: Preparing to install IE-Spelling-en.cab using C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab
02:48.735: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE-Spelling-en.cab /quiet /norestart
02:58.079: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:58.125: INFO: Preparing to install IE-Hyphenation-en.cab using C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab
02:58.172: INFO: Launched package installation: C:\Windows\System32\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE157EF.tmp\IE-Hyphenation-en.cab /quiet /norestart
03:06.313: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
03:06.344: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00000bc2 returned 0x00000000.
03:06.375: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
03:06.407: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
03:06.454: INFO: Verifying that the Internet Explorer Optional Component is enabled.
03:06.485: INFO: Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.
03:06.641: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
03:10.188: INFO: SQM Upload returned 403
03:12.485: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE157EF.tmp
03:12.579: INFO: Unable to remove directory C:\Windows\TEMP\IE157EF.tmp, marking for deletion on reboot.
03:12.672: INFO: Released Internet Explorer Installer Mutex -
Will not install from inside App Manager
Got past the A12E5 error, now with the Adobe Application Manager installed it will not download the any software for install.
Is there a place to download them alternativly and use the App Manager to approve/activate and install?
I believe the error code is (-60)Manish, thanks for your help.
Tried similar in Windows 7 with no effect. Also tried Adobe Creative Suite cleaner tool via http://www.adobe.com/support/contact/cscleanertool.html It installs ok on my laptop, so doesn't appear to be a location issue, but will not install on my workstation. Manual installation of AAM completes but after typing in user/pass it says 'download error, contact customer service'. Photoshop CS6 beta installed and functioned ok and I had CS4. Tried uninstalling both, same issues. Adobe Lightroom 3.6 is still installed and functions.
I also tried someone's suggestion of installing the trial of something so it would install the Akamai Netsession download manager. This completes and when I launch the AdobeApplicationManager.exe I can see it spawn Netsession which then hangs and can be killed initially, but zombies for a while ( cannot be killed ). Packet trace ( https://twitter.com/#!/DaSpadeR/status/201295684022960128 ) appears to show initial handshake and then nothing. -John Spade -
Drivers will not install from original disk
Ok, so i have a early 2008 MBP, which i just installed Boot Camp on. After a tedious install of windows, I got it to work, now to have the drivers get messed up. What happens is it will start installing the Drivers and then usually (it stops at different times) will get to the audio drivers before it just spins the disk for about a second then stops, then spins it again, and repeats this process infinitely or until I turn off the computer. The disk will not eject, and boot camp install will not end. Can you help me get past this, because I really would love to finish the install! As i said the farthest it has ever gotten is the Audio drivers which is where it usually stops but sometimes it will stop earlier than that, but Audio is the most problematic because it has never been able to go past that.
Manish, thanks for your help.
Tried similar in Windows 7 with no effect. Also tried Adobe Creative Suite cleaner tool via http://www.adobe.com/support/contact/cscleanertool.html It installs ok on my laptop, so doesn't appear to be a location issue, but will not install on my workstation. Manual installation of AAM completes but after typing in user/pass it says 'download error, contact customer service'. Photoshop CS6 beta installed and functioned ok and I had CS4. Tried uninstalling both, same issues. Adobe Lightroom 3.6 is still installed and functions.
I also tried someone's suggestion of installing the trial of something so it would install the Akamai Netsession download manager. This completes and when I launch the AdobeApplicationManager.exe I can see it spawn Netsession which then hangs and can be killed initially, but zombies for a while ( cannot be killed ). Packet trace ( https://twitter.com/#!/DaSpadeR/status/201295684022960128 ) appears to show initial handshake and then nothing. -John Spade -
Photoshop CS6 will not install from Adobe Apps manager
I have the cloud subscription and I tried downloading PS, it said it could not so so because i had the beta installed. So I got rid of the beta and tried again....still said no. So I emptied my trash and restarted, and it still will not download PS. I got all my other software ok, but cant get PS for some reason. Does anyone know how to fix this?
ThanksI talked with support, go download the adobe cleaner and it will allow you to see what files from PS CS6 are still on your system and get them off. I am trying now, will let u know if it works.
download it here http://www.adobe.com/support/contact/cscleanertool.html -
Flash will not install from CS4 Web Premium on XP
I installed CS4 Web Premium a while back and, since I do not do a lot of Flash development, I didn't realize right off that Flash CS4 did not install. However, I just tried to go back and install it from the DVD and it shows in the list but the box in front of it is uncheckable. The heading at the top says to check the boxes to install or reinstall the applications. Other programs such as Dreamweaver, Contribute, Acrobat, Illustrator, Photoshop, etc. can be checked but the box in front of Flash (and Soundbooth, etc.) are unresponsive. I do still have CS3 Web Premium on this machine which has Flash CS3 Professional and Flash CS3 Video Encoder as well as also still having Studio 8 and CS 2 with Flash 8 and Flash 8 Video encoder and InDesign CS2 & CS3, Visual Communicator, VlogIt, etc.. Do I need to remove any of those first? This machine is about 3 years old (Dell Optiplex GX620) running Win XP. I'm about to upgrade to a new machine in about a month that will be running Windows 7. So I will be doing a clean install of CS4 Web Premium then. But it would be nice to fix this so I can work on some Flash files before then. Any help would be appreciated. Thanks.
Hi, I'm assuming you are using the Manual Install. Did you already Uninstall any current Flash Player version?
If not, download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download and SAVE to your Desktop the Installer:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Use the EXE Installer for Windows and Internet Explorer. Use the EXE Installer for the plugin based browsers
Then use the Administrator Account and CLOSE all browser Windows. Disable any instant messenger service from the system tray.
Run the Uninstaller and reboot(restart) your computer.
Then Run the Installer and reboot.
That message appears because the IE browser window is open.
Thanks,
eidnolb -
Device driver for IPOD NANO...will not install from installation CD
During first installation of software, program asked to connect the ipod to the pc for possible formatting. PC did not find the hardware drivers on the installation disk, will not reconize the new hardware!!!! Did install itunes and ipod updater fine. I already uninstalled and reinstalled and the same thing happened. Please help I have two brand new nano's that I would like to be able to use.
Thanks Jen
dell deminsion 2350 Windows XPHi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!
-
Macbook pro PE 12 will not install from download
Ive tried several times to install PE 12 from a down load. It will download from the site but when it goes to install in states : elementsautoanalyzier
dynamiclinkmanager
needs to close? I go to force close and there is nothing there?
Im ready to get a refund and just buy the disk!!
Thanks for any help
LarkLark
Where is this download coming from...
Premiere Elements 12 Mac (Adobe)
Premiere Elements 12 Editor (Mac App Store)
Premiere Elements 12 Quick Editor (Mac App Store)
I am an Elements Windows users, so the following is from what I have read on Force Closing. Not sure if you are way beyond the following details but I thought that I would post it nonetheless, just in case
http://support.apple.com/kb/ht3411
ATR -
Win 7 in Boot Camp: Drivers will not install from snow leopard cd.
I have a early 2011 Macbook Pro (8,1). I am loading Windows 7 with Boot Camp, but cannot get any of the drivers to install. (ethernet, video, etc)
I have tried both the Snow Leopard cd (I think it's Boot Camp 3.2?), and also downloading drivers online, neither work. I have tried reformatting/reinstalling, and even tried loading a old copy of XP and I had the exact same problem there too.
What happens: I install the drivers successfully, restart, and nothing has changed. I can see the drivers installed in the programs list (when I go to "uninstall programs") but if I go to Device Manager all of the devices (ethernet, video, etc) show a yellow triangle and say they need drivers! It's like I'm installing the wrong drivers or something.
I can't find any other posts with a problem like this, I have been working on this forever and am kind of at my wits end. Any ideas??Don't believe what Apple posts.
If you don't have EFI64 like 2008 and later Mac Pro, then you will run into a hurdle and have to modify the Windows DVD to get it to boot and install.
To Apple, and due to the non-standard way they implemented UEFI, and that ours (2006/7 Mac Pro) all there was that we got was the 2005 EFI32 (affects our choices in graphics cards too).
I installed 32-bit, then installed 64-bit on another partition.
The DVD can be modified, from Windows, most easy method would be from any of the VMs like VirtualBox. Then use one of the 2-3 Imgburn or other tricks mentioned online (search for "Jowie" and search for the "Select CD-ROM" error you get trying to boot).
FAQ, Updates, etc http://www.apple.com/support/bootcamp
System Requirements: http://support.apple.com/kb/HT1899
Windows 7 FAQ: http://support.apple.com/kb/HT3986
List 64-bit Compatible: http://support.apple.com/kb/HT1846
Boot Camp 64-bit 3.1 http://support.apple.com/kb/DL979
Boot Camp Vista Upgrade Utility http://support.apple.com/kb/DL977 -
Acrobat 7 Pro will not install from Adobe download 22020134.exe
I run Windows XP. I uninstalled my copy of Adobe 7 Pro to transfer it to another computer. I successfully installed the download provided by Adobe (which replaces original disks) on the other computer. I found I was having general problems with this computer (nothing to do with Adobe) and decided to uninstall Adobe 7 Pro and reinstall it on my original computer. So far it has failed to install and I get the message: Setup has detected that you already have a more functional product installed. Setup will now terminate.
I have removed all Adobe products from my computer other than Photoshop elements.
Has anyone any ideas as to what I can try next. Anyone's help would be much appreciated.Run http://labs.adobe.com/downloads/acrobatcleaner.html and remove any left over parts of the Acrobat folder you had before. Then reboot and install. You may still have some issues with the install since the activation no longer works with AA7. If this is the case, then check http://forums.adobe.com/thread/1287524.
-
Tiger will not install from disc
Hi all. I'm very frustrated.
I recently tried to reinstall Mac OS 10.4.6 onto my Powerbook G4. I purchased this operating system from the Apple store as an upgrade, not sure how long ago. Originally, the computer ran 10.2, but I'd rather have it running Tiger. Anyway, the disc check fails, and the installation doesn't complete from the Tiger DVD. The frustrating thing is that it's only been used for one install before now, and I don't see any scratches on the disc. As of right now, I've been able to install the original operating system, OS 10.2, from the original system disc.
Anyone know if it's possible to get a replacement disc from Apple? Alternately, is there any way to save a DVD like this? Do you think anyone at a Genius Bar could help me with a 10.4 install despite the fact that my DVD is no good?Hi RRBarrow, and a warm welcome to the forums!
Anyone know if it's possible to get a replacement disc from Apple?
Call AppleCare and explain, they may not have any Tiger disks, but I have heard they made one for somebody.
Alternately, is there any way to save a DVD like this?
I've recovered some using Disk Utility to make a new image to burn... it tries harder to read it than the installer does, other times it would not.
Do you think anyone at a Genius Bar could help me with a 10.4 install despite the fact that my DVD is no good?
Very likely they could/would from one of theirs. -
IWorks will not install from DVD.
I am trying to install iWorks from DVD (my second copy from Amazon as the first did exactly the same thing). The DVD drive does not seem to read/recognise the DVD and ejects it after about 1 minute. DVD drive does not have any problems reading any other CDs/DVDs.
Is there a setting I need to adjust in System Preferences or a software download ? Or is there a batch of 'duff' iWork disks out there ?
Any assistance gratefully received.It sounds like a problem with your RAM.
http://support.apple.com/kb/HT1547?viewlocale=en_US
You could remove and reseat it, but really it may need to be replaced.
6 weeks out of warranty! That's precison for you I suppose -
Encore will not install from Master Collection DVD
I have Windows XP Pro Service Pack 3.
I just installed the Master Collection CS4 suite; all apps installed except for Encore. The error I received was MS XML Error: Error 2. I ran the Adobe Support Advisor, but it resolved nothing. I installed the apps with my Virus Protection and Firewall disabled. They were also disabled when I tried to install Encore another couple of times.
I have searched the web and Adobe Forums but have found nothing to help me.
Does anyone have any advice?
Thanks!Nicholas,
I do not know how the software is arranged on the disks in the suite, but with the separate Premiere CS5 version, Encore is part on CD1 and part on CD2.
The first time I installed CS5, Encore failed to install. I knew I had had a problem with the disk changeover, so I tried a repair install and after this Encore was installed OK.
Worth a try I should say, if you have not already done this.
Maybe you are looking for
-
My computer died, so trying to connect my phone on a new computer and download all my music to the new computer/itunes?
-
XML 1header and n detail records
Hi All, AM new to XML Files generation. I need a procedure which satisfies my business requirement My business requirement is we need to generate XML target files based on customer number.and item number. The out put file should contain Customer deta
-
ORA 03114 error weblogic Forms 11g db 11g winserver 2008 64 bit
-
Hi All, I am new to BPS and and am trying to set up the functionality for Retraction of data from SEM to R/3. But when I go to the transaction (as mentioned in SAP Help) Business Analytics -> Financial Analytics -> Cost Center Planning -> Cost Center
-
URGENT - Query to get employes with multiple cost center
Hello, The sample data for my requirement is: create table a (year number(4), month number(2), empno number(5), cost_center number(3) insert into a values(2003, 10, 1034, 102); insert into a values(2003, 10, 1034, 102); insert into a values(