Simulate real time recording...

Hi,
I know with CP we can do real time video mode recording, but is there a good way of simulating a video demo?
For example, I may have a dynamically changing list of names etc when I am scrolling though the phonebook of a particular application,
I type a W, then a filter on the phonebook will start searching for names beginning with W and so on, so using still shots, is there a way to simulate that without using video demo mode??
Any ideas?
And have I explained this clear enough?
Cheers
Rossco

You are probably looking for Full Motion Recording solution here. We have many such scenarios and I haven't seen FMR working in these cases (It works most consistently when we drag and drop an object from one part of the screen to another).
To simulate this, we record the real-time search results by pressing "Print Screen" on our keyboard.(basically force capture the screenshot).
Sreekanth

Similar Messages

Waveform graph x-axis into real time recording

Hey there,
I have acquired voltage off a LVDT through the DAQ assistant and connected it to a waveform graph. However, the x-axis says its 'Time' but its got the white line running across it even though no time has elapsed and the time itself has funny units to it. What I need on the x-axis is real time so that I can see the line register from left to write as time passes by. I have tried a few things like connecting the DAQ to a chart graph but it doesnt have the log graph which I need. I have also fiddled with the XY graph by connecting the DAQ assistant into the 'Y Input' but I am not sure how to input time into the x input.
If someone could help me with this problem, it would be much appreciated.
Thanks,
Gurung

Hi Gurung,
what do you expect here? Wire waveforms to a chart:
(DAQmxRead settings: n channels, n samples, 1D array of waveforms)
For learning the basics you should
- examine the examples coming with LabVIEW
- go through the Basics course on NI website
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Simulate human skeleton ....in real time

hi friends ..
i doing one project in which i want to simulate real time object motion in java 2d ..
for this using web cam i success fully capture image and buffered in pixel array ....
now i want object coordinate to simulate it in 2d .. ..
imagine human motion . and i want simulate it in form of human skeleton ... so make a skeleton i want coordinate
and by change coordinate frame by frame .. i want to simulate it ..
so suggest some thing relevant ..
thanks in advance ..

it's been a long time since i've done this, start here:
http://www.cescg.org/CESCG-2000/RFilkorn/
hope that helps (but you may find there's a simpler solution for 2D)

Why can't I sample or record with effects in real-time?! LE9

Here's the scenerio: I'm recording electric guitar, but I'd like to record in real-time using the effects in Logic Express. I can't hear the effects until after I've recorded the track. Am I missing something totally obvious? I'm using LE9 and a Focusrite Saffire Pro 40. Any help?

Yes to both questions.
To hear the fx you have applied to the guitar audio track, you need to monitor the signal *after* the channelstrip. You probably have some configuration which leads to a monitoring of your guitar signal *before* it passes the channelstrip.
Make sure you have set the track to record (red "R") and maybe input monitoring (yellow "I"), and listen to Logic's stereo output. Maybe your Focusrite is set to hardware input monitoring by accident? This would explain a lot.
Fox

Recording with audio playback slowed down 65% what speed do I need to speed the video back up to to get it into real time?

Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thanks

hey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting

Record Real Time output from a Audio Instrument to Audio Track

Hey,
Is there anyway to record in real-time the output of an Audio Instr?
I use a plugin that doesn't support automation, so I need to record the changes as they appear?
Any other solution?
D

Sound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower

Anyone know if there is an adapter to record audio from an outside source in real time to an iphone 4s or 5s video?

Anyone know if there is an adapter to record audio from an outside source in real time to an iphone 4s or 5s video?

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

I want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording. At the moment i have to go into post-production and manually set the graph equalizer at various time points .

i want to be able to tweak the graphic equalizer in real time while recording - and have this have the audible effect written to the recording.
At the moment i have to go into post-production and manually set the graph equalizer at various time points ...

This won't be real-time as you record, but you could tweak the EQ in real-time after the recording thus:
Record what you want to tweak into GB with no effects.
Solo the track and output it into something like Audacity.
Start Audacity recording, then play your track in GB as you make those tweaks. That's what Audacity will record.
Get that file from Audacity and put it into GB, then you'll have that effect.
Sorry if it's complicated, but that's what came to mind. Hope it works.

Record Drums Real Time (GB on iPhone)

Hi, i want to record drums real time in GB on the iPhone (like iMaschine or NanoSound)
It seems all you can do is drag the drum(s) onto some square, which has pre-recorded or pre made rhythm? See the pic (it has Loud/Complex/Simple/Quiet)
Can I just simply record the drum(s) REAL TIME??

You can record them and treat them as an iTunes type file but, drums on a mic that has a diaphram the size of Q tip? Don't expect much, way more sound pressure level, tons of compreesion, and if you don't have a bunch of special stuff, it will pretty much be noise.

Simulate load times

Hi all,
Anyone here knows if we can simulate load time in BW?
Example, i have a DSO that goes to a Cube for reporting.
I would like to simulate how long 100,000 records will take to get from ECC to the Cube.
I might later want to test how long 250,00 records will take.
RSA3 is not useful as it can only test how fast the extractor will take.
Is such as thing possible?

Hi Ganesan,
1) for DSO to Cube Loading: You have to create a DTP.
   Execute the DTP with Debugging mode (simulation).
   Then in the monitor you can find the time taken.
2) for Loading from ECC to BI : You have to create Info package.
   But info package does not give any option for simulation.
cheers.

How much interfaces can be driven in "real-time" with a VI in LABVIEW 6i

In my application I need to merged data from different devices hanging to my computer via different interface types. Each data set in to be specifically formatted in a file. Each data set comes a a rate of ~ 10 Hz.
As acquisition devices I do have
- 4 digitizers connected to the PCI bus and their labview driver are already given by the constructor
- an instrument from which data to be imported via a GPIB interface
- an instrument from which data are imported via a serial port
- and probably in the future, 2 devices mounted on two USB port
I wish to developp a LABVIEW 6i code which permit me to make the request to all instrument, to import the data and to merged them as quick as possible so
that I can store data set coming every 0,1 s. All data from all instruments must be recorded for the same event at the same time (in a triggered manner) before it performs the acquistions for the next event
I would like to know what is the best way to each my goal.
- Is it possible to control all this with one VI (containing lot of VIs) ?
- Should I execute a VI for each interface and run them at the same time and save all data set with a time stamps in a file and then, off-line, process all the files and merge my information.
In a general manner, are there any rules which indicate the maximum number of interface (according to their nature) which can be properly controled on a given platform from one computer.
Thanks you very much for any answers

Its been a couple of days with no reply....
Look at the occurence functions.
You can have one loop send occurences at teh rate you need.
Put each of the other functions in seperate loops that wait for the occurence on each interation.
Provided each of your loops runs fast enough this approach should serve you up till you run into the indeterminism of Windows. If the the indeterminism will be an issue, you may have to go with LV Real-Time.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to copy data from a Input query to real time Infocube

Hi All, I need some help on IP related stuff. The details are as below:
I am using two real time infocubes and one Multiprovider on them.
First Infocube u2018PRODUCTu2019 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales
Second Infocube u2018C_PRODUCT u2018 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales and Forecast Sales
( u2018Forecast Salesu2019 in the extra object in the second Infocube. Remaining objects are same in the both the cubes)
First Infocube u2018Productu2019 has data but the second cube does not have any data.
I have created a Multiprovider ZMulti and in that I have included these two cubes. On this Multi Provider, I have created a Aggrigation Level(The details of the aggregation level is provided in the next page).
On this Aggrigation level I have built a Input Query by which I run the report.
(In the Rows area, I have taken Product Group, Product, Region and Fical year.
In the Key Figure section, I have taken Gross Sales and Forecast Sales( which is part of the second Infocube C_Product). These two Key Figures are made Input as Input ready. And the Query is Input ready query. In the Filter, I have taken Fiscal Year Variant. )
Data available in the first cube and no data currently in the second cube. Now executed the report and report displayed information from the first cube.
EX:
Product     Product     Region          Year     Gross Sales     Forecast Sales
Group
PG01           Beer           North           2008           10000           u2026u2026u2026
PG01           Beer          South          2008          20000           u2026u2026u2026
PG01          Beer          East          2008          15000           u2026u2026u2026
The second column is empty and there is no data for the Forecast sales Key Figure in the column.
Things look OK till the above.
Now based on the Gross Sales, I am entering forecast Sales values and I need to save the entire record to the second cube.
For this in the report, I have given the Forecast sales values in the second column and right clicked the mouse and form the menu which I got, selected the u2018SAVEu2019 Option to save the data. For some time, I can see u2018Processingu2019 message and later values at u2018Forecast Salesu2019 are disappearing.
Data is not saving to the cube second cube.
====================================================
Am I missing any thing?
In the Query, Do I need to provide InfoProvider and restrict it to specific value?
In the query, Do I need to include, 0currency object?
Could you please guide me on this?
=============================================
Details of the Aggrigation level.
            I have created an Aggrigation Level ZAL_Prod on MultiProvider.
            Selected all the objects and activated.
            In the Filter, I have taken 0Fiscal Year Variant and saved it.

Restrict Forecast sales to the Plan cube in the Query.
that should fix it.

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

RAM Previews No Longer Real Time

Work computer.   Mid 2010 Mac Pro with 64GB of RAM. Running After Effects version 11.0.4.2.   Multiprocessing off.   AJA Control Panel v3.
1920 x 1080 comps, 29.97 fps, no 3D.
The Mac was running Mountain Lion and RAM previews were FINE. Zero issues.             Ever.
The computer was upgraded to Mavericks 10.9.5.      I use the term upgrade loosely, BTW.       Now ... RAM previews no longer play in real time. Most I get - and it fluctuates - is 19, 20, 23 frames per second, never 29.97.    Sometimes it blasts all the way up to 40, 45, 47 like it’s playing catch-up, but that’s rare.
- Restarted the computer. No change.
- All projects.   Makes no difference, old legacy projects or new.
- Even simple 1-layer projects with simple position animation, no effects - not real time.
- 8 bit mode, not just 16 or 32 bit.
- Color management both on and off.
- Simulate output on and off.
- Preferences -> Video Preview was set to AJA, so I tried Computer Monitor Only. That doesn’t work either.
- Full Rez, Half, Quarter. . .. . doesn’t matter.    Never real-time.
I've seen others ask about this issue but none of the posts ever resulted in "you need to set 'this' to 'that'" etc.        Have any suggestions?
Thank you,
Marc

Marc Trzepla wrote:
I am not a programmer but I've always run under the assumption that things "get faster", not slower. The fact that what once worked flawlessly was crippled by an "upgrade" boggles me.
Mavericks and Yosemite have both have quite a number of issues when folks upgrade to them.
Apple is really starting to bother me lately. First the attitude evident in the Final Cut debacle, then the Mac Pro annoyance, and now the OS upgrade issues... I know smartphones are making them boatloads of money, but they really seem to be neglecting their professional users who've been with them for years before iPhones were even a thing!

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

Simulate real time recording...

Similar Messages

Maybe you are looking for