Simulation black out each segment

Hi,
I have this wierd black that every time when the track reach one of the chapter that chapter is black & I don't see the video at all.
ex: chapter 1 play OK, when it reaches chapter 2, chapter 2 is black...
I have 1 track with about 20 chapters, each chapter is different segments of mpeg2 put together in the track, (like the edit in fcp, not 1 long movie.)
could this be the problem?
I burn the disc & it play fine on most dvd player but not the SONY one.
anyone has this experience before?
thankx
JP

Odd, but not unique - I believe this was discussed on the boards a while ago. Seems to affect some folk and not others and trimming back 1 GOP isn't necessarily unprofessional, except of course that you shouldn't need to do it!

Similar Messages

Slideshow Error: Some pictures on burnt disc 'black out'

Hi, This is a bit of a strange one.
I have authored a disc with a slideshow that previews fine in both DvDSP's simulation mode and also when opening the Video_TS folder in DvD Player.. (I am using the 'push' transition for each picture)..
When I burn the disc and play it back in a DvD player (hardware or on the Mac) some of the pictures (not all, but always the same ones i think) push in fine, then go black and then reappear in order to slide out again.
All the JPEGs were all exported from Aperture at the same time and all fine, nothing special or crazy about them - but some of them (arbitrarily it would seem) do this black out thing while others are fine.
The first burn it started about 8 slides in (out of about 20 total), so I changed the order.. second burn - nothing changed.. same ones played up and the others were fine.
Cant work out why it would do this.
Does anyone have any ideas?
I have converted the slideshow into a track - and it seems to have stopped it but that doesn't leave me any the wiser for this or future projects.
Help appreciated.
Thanks
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.8) 2GB RAM, 500GB HDD, 256MB Graphics
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.7) 2GB RAM, 500GB HDD, 256MB Graphics

Sounds like it might be referring to the memory IN the Ipad itself that is full. That is totally separate from iCloud storage. See this https://discussions.apple.com/message/18259473#18259473 and this
https://discussions.apple.com/thread/4025095?tstart=0
same issue

Mid 2010 MacBook Pro 15" Blacks Out Without Warning

Quick Summary of Problem: My MacBook Pro is currently shutting down without warning. It would be more accurate to say that the screen goes blank but the machine remains on as can be heard by the fan. Nothing resolves it without powering down and restarting. It has occurred when attached to a power source or via the battery.
My machine specs: Mid 2010 MacBook Pro 15” with 500GB hard drive, 8GB RAM, Intel HD Graphics/nVidia GeForce GT 330M with 512MB, anti-glare 15” screen with max resolution 1680 x 1050). Running Snow Leopard 10.6.8 with 2013-001 Security Patch installed.
I have AppleCare which commenced when I first bought the machine in July 2010.
System Profiler says my battery condition is ‘Normal’. Cycle count: 610.
Detailed Summary of Problem: Back in January, my MacBook Pro shut down several times without warning. Each time, I was creating selections on high resolution imagery in Adobe Photoshop CS5.
Not long after, I saw the ‘MacBook Pro SMC Firmware Update 1.7’ relased on Feb 12 (http://support.apple.com/kb/DL1633) and installed it via Software Update. By coincidence or not, my MBP behaved much better afterwards and the seemingly random blank screens requiring a restart disappeared.
But then I installed the ‘Security Update 2013-001 (Snow Leopard)’(http://support.apple.com/kb/DL1642) via Software Update and that’s the only thing I can really remember changing to my system. Since then, the black-outs have reappeared. As before, I was usually using Photoshop and working with high resolution imagery. However, one time the machine blacked-out, I was simply doing a two-finger scroll on the built-in trackpad whilst in Chrome (Version 25.0.1364.172).
The blackout has occurred twice now not being connected to power, and twice with it being connected to a wall socket. Needless to say, I lost work in Photoshop (even though I’ve begun to save more regularly) and now it feels like it’s a ticking time bomb and I don’t know when it’s going to go off.
One thing I’ve found rather odd is that in the crash log, the kernal version doesn’t seem right for Snow Leopard:
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
The full crash log can be found at the bottom of this post.
Fixes I’ve tried:
1) Resetting the NV-RAM has done nothing. (was suggested
2) I’ve tried reinstalling the ‘MacBook Pro SMC Firmware Update 1.7’ by downloading the manual installer from Apple, however it now says ‘Alert: This software is not supported on your system’ which in a way makes sense given I’d already applied the firmware update, but a more accurate message along the lines of ‘This firmware update has already been installed’ would be more reassuring.
3) If all else fails, I could resort to copying over a backup I created with Carbon Copy Cloner, which was done before I reinstalled the 2013-001 Security Update for Snow Leopard. But that’s a bit of a headache too, because my documents I’ve updated since the backup will be out of sync. Another reason this isn’t a great solution is that I can’t take advantage of the 2013-001 security update, nor future ones.
Any suggestions? There’s probably no good time for something like this to happen, but this is a particularly bad time – I’m currently beginning design and finished art freelancing and brushing up on some applications I haven’t used in years. Nor am I going to make an impression meeting with recruiters without my folio being presented from my MBP.
I’ve already booked a Genius appointment 2.5 days from now, but all help and ideas greatly appreciated!
Interval Since Last Panic Report: 1499814 sec
Panics Since Last Report:          3
Anonymous UUID:                    64BB09F4-C27C-4BA6-A3C4-EAF953593C01
Sun Mar 17 21:18:55 2013
panic(cpu 2 caller 0x83506c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa691c000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x81ec2188 : 0x21b837 (0x5dd7fc 0x81ec21bc 0x223ce1 0x0)
0x81ec21d8 : 0x83506c9b (0x8371c28c 0x8378c800 0x8372ae60 0x0)
0x81ec2278 : 0x83621608 (0xe826c04 0xd8e9004 0x100 0x16043000)
0x81ec22c8 : 0x83618601 (0xd8e9004 0x100 0x81ec22f8 0x834f6778)
0x81ec22f8 : 0x83d3b9a6 (0xd8e9004 0x100 0x438004ee 0x1)
0x81ec2438 : 0x836402b5 (0xd8e9004 0xd8eb004 0x0 0x0)
0x81ec2478 : 0x8350fe7c (0xd8e9004 0xd8eb004 0x0 0x0)
0x81ec2518 : 0x8350c55b (0x0 0x9 0x0 0x0)
0x81ec26c8 : 0x8350e58f (0x0 0x600d600d 0x702b 0x81ec26f8)
0x81ec2798 : 0x82b07eae (0xc1d00041 0xbfef0033 0xbfef0034 0x857c)
0x81ec2808 : 0x82b17734 (0x1a699c00 0x1a106300 0x8 0x0)
0x81ec2828 : 0x82b3c322 (0x1a106300 0xb 0x81ec2848 0x2345f4)
0x81ec2858 : 0x82b3cb3d (0xe863000 0x0 0x81ec287c 0x0)
0x81ec2888 : 0x82b1cd79 (0xe863000 0xa4837080 0x0 0x0)
0x81ec28d8 : 0x82aded0c (0x6bbcb000 0x0 0x0 0x3)
0x81ec2948 : 0x82ade40f (0x6bbcb000 0x0 0x2 0x3)
0x81ec2978 : 0x82ad405f (0x6bbcb000 0x0 0x2 0x6be38000)
0x81ec2ab8 : 0x82b0d5d8 (0x6be38000 0x1 0x81ec2bcc 0x81ec2bc8)
0x81ec2b68 : 0x82acffe1 (0x6be38000 0x1 0x81ec2bcc 0x81ec2bc8)
0x81ec2be8 : 0x56da06 (0x6be38000 0x0 0x81ec2e3c 0x81ec2c74)
0x81ec2c38 : 0x56e2a5 (0x82b5e720 0x6be38000 0x160bc588 0x1)
0x81ec2c88 : 0x56eb59 (0x6be38000 0x10 0x81ec2cd0 0x0)
0x81ec2da8 : 0x286638 (0x6be38000 0x10 0x160bc588 0x1)
0x81ec3e58 : 0x21dbe5 (0x160bc560 0x1b4155a0 0x1ecfa8 0x5d43)
0x81ec3e98 : 0x210a86 (0x160bc500 0x0 0xe759570 0xea560e0)
0x81ec3ef8 : 0x216f84 (0x160bc500 0x0 0x0 0x0)
0x81ec3f78 : 0x295c57 (0xda5e288 0x0 0x0 0x0)
0x81ec3fc8 : 0x2a256d (0xda5e284 0x0 0x10 0x18c5fa84)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 27346403042381
unloaded kexts:
com.apple.driver.AppleUSBUHCI          4.2.0 (addr 0x7ab8a000, size 0x65536) - last unloaded 108333775323
loaded kexts:
com.vmware.kext.vmnet          3.1.2
com.vmware.kext.vmioplug          3.1.2
com.vmware.kext.vmci          3.1.2
com.vmware.kext.vmx86          3.1.2
virtualcdrw.driver          1.0
com.AmbrosiaSW.AudioSupport          3.2
at.obdev.nke.LittleSnitch          2.4.0
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 44829748683
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AGPM          100.12.31
com.apple.driver.AudioAUUC          1.57
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.CHUDUtils          364
com.apple.iokit.CHUDProf          364
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AppleIntelHDGraphics          6.4.0
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleIntelHDGraphicsFB          6.4.0
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.GeForce          6.4.0
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.driver.AppleUSBTCButtons          201.6
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTCKeyboard          201.6
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleUSBHub          4.2.4
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.CHUDKernLib          365
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41.4
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.driver.AppleSMC          3.1.0d5
com.apple.nvidia.nv50hal          6.4.0
com.apple.NVDAResman          6.4.0
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.driver.AppleUSBMultitouch          207.7
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3

I am sorry. The page that came up has an AD for issues with a 13" MacBook Pro in the corner. I read the AD as if it were part of the article and assumed the whole page referred to the 13" model. My Mistake.
However, the issue described by TS4088 is not a soldering problem. It is a Latent Defect -- a flaw built into certain batches of those chips from the day they were packaged and installed.
If your Mac fails the VST test used to detect this Latent Defect, re-flowing the solder is likely to have NO EFFECT on its performance -- the solution is the remove the defective chip and replace with a good one.
There certainly can be problems in these and other Macs where a re-flow would be beneficial. But I caution Readers not to generalize your solution to Macs that are known to fail VST. Re-flow alone will not solve the Latent Defect problem.

Macbook screen blacking out suddenly

Hi all,
While using my Macbook, the screen suddenly goes black.
The screen goes black apparently randomly, sometimes it does, sometimes it does not.
My Macbook is on my table, which I guess is pretty well ventilated too.
After pressing the spacebar and other keys for a while, the blacked-out screen will just go back to normal.
What is the problem? I would be glad if anyone could offer any advice.
Thank you.

Go to system preferences, go to energy saver, at the top with the scroll down menu you can change settings for power adapter or battery, and below that option there's optimization settings. And while you are there, go into options (button beside "Sleep") and see if there's any options you may want to change as well. You may have to click the little pad lock icon at bottom left corner to make changes.
Any more questions just ask away. If you think any of the advice here are helpful you may want to click the little icon to mark each post "helpful" or "solved".

Flip Transition in IPhoto Blacks out

when i put random transitions and convert the photos into a slide show, all of the "flip" transitions black out just prior to the the next photo. how can i fix that. I just purchased and reinstalled the ILife '06 thinking this would fix it, but it hasn't.

WuD:
Welcome to the Apple Discussions. First run Disk Utility and repair disk permissions. If that doesn't help, download and run BatChmod on the iPhoto application with the settings shown here, substituting your account name for mine. You can either type in the path to the applicaion or just drag the application into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

LR4.4 - blacked out boxes when importing images from upgraded PSE10 catalogue [was: Lightroom 4]

I have been using photoshop elements 10 for over a year and decided it was time to upgrade to Lightroom for my photo workflow as I am doing more paid photography work. I purchased and received my boxed full version of Lightroom 4 from B & H photovideo on Friday. I installed it then went on-line and updated it with the download of lightroom 4.4. Then I opened lightroom 4.4 for the first time and went to files and selected upgrade my photoshope elemnts catalog to lightroom. Once that was completed I then tried to import images to lightroom 4 to work with them and all I get are blacked out or greyed out boxes in my slide strip at the bottom of the desktop window in import mode. When I point to each box it shows a file name but will not show the image. I have spent all kinds of time reading and watching tutorials on opening images, importing images and catalogs and I am FRUSTRATED.... Would really like to talk to someone to get this figured out. I never thought it would be this difficult to use this program... HELP Please...

I would like to THANK YOU for your assistance in my situation. I followed your suggestion and went into my monitor settings and did a manual reset to the default profile and went back to Lr and the images started popping up one at a time until all 7000+ were visable. Just for the record, I am using Canon 1Ds Mark II, on a Quadcor AMD unlocked FX processor running Windows 7. I shoot in RAW and convert to JPG. It would have been the last thing for me to look at on my monitor settings as all the other programs on my computer run without a glitch. Thanks again for your help... Cheers!

IPod Nano v5 trouble - device blacks out anytime, doesn't work again until battery dies. What should I do?

I have this iPod nano v5 for about 2 years now, and since I bought it I had this tiny problem, which I managed to solve everytime, though it is annoying: the device has this awful "habit" to black out without any apparent reason (it doesn't receive blows nor it falls on the ground) and to not respond to any command (if I press any button, there's no reaction) until the battery dies (I usually have to wait 'til the battery dies, which oddly takes less time than if the device was just not being used - over the night, usually). Also this happens most often when the battery's full (or maybe it's bad luck?).
When I try to revive my iPod through connecting it to iTunes, it says that the device is corrupted (or something like that) and suggests something I don't remember (I don't try this for a while, since the inconclusive result) that works a while on the iPod and then says something like "Sorry, man, I can do nothing".
Have anyone had a similar issue and worked it out in a less time-requiring way? I'd appreciate any kind of help.
Greetings~

First I would have returned the iPhone to Verizon the minute I discovered dust under the camera lens and had them replace it with a new on.
Second, the instant there was a problem with sending it in I would have used a telephone and called AppleCare and discussed the issue with them.
Do the pictures that are on the phone show any of the issues you claim are present?
Incidentally, you can do an out-of-warranty replacement of the iPhone for $269 USD, not $700.
But finally, I would call AppleCare and ask to be transferred to Customer Service. Give them your service number and go over each of your complaints with them.

My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

My screen blacks out and computer starts up again due to an error. Anyone any suggestions what could case this?

Hello nattygrimm,
I was looking into the issue you are describing and found a great resource to try and fix the issue without having to re install the OS. It is an article called Mac OS X: How to troubleshoot a software issue found here: http://support.apple.com/kb/HT1199.
I recommend starting here:
The first and easiest test to try is to see if the issue affects a different user account on your Mac. Each user account has customized preferences and other items stored in its home directory. You'll first need to create an additional user if one does not already exist (follow steps a-h below). Then, log out of the current user and test the issue in the new user account.
If this resolves the issue, there may be an issue with a file in the home directory of the original user account.
From the Apple menu, choose System Preferences.
From the View menu, choose Accounts (or choose Users if using Mac OS X v10.2 or earlier).
Click "+" (or click New User if using Mac OS X v10.2 or earlier).
Give the new user a name and short name.
Mac OS X v10.3 or earlier only: Click the Password tab, and give the user a password.
Mac OS X v10.3 or earlier only: Click Security.
Select the checkbox for "Allow user to administer this computer". This makes the user account an administrator.
Click OK, or quit System Preferences.
Work your way down the article as needed.
All the best,
Sterling

Page elements blacked out when inspecting them

When in the Firefox dev tools panel and inspecting the elements of an HTML webpage, the element my cursor hovers over gets blacked out.
http://i.imgur.com/f6pDdUH.png
It's annoying to have to open chrome each time I have to write a userstyle or something, especially when Firefox has much better developer tools otherwise. So I hope it isn't a "feature", but a bug on my side!
Anyone knows how to fix this, preferably without having to reset firefox?

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Blacking Out People

Hello, everybody. I'm working on a video in which I must black out all the people. I've exported the film as a series of stills and I've brought them in to Photoshop. Right now I'm using the paintbrush tool to color out each person but it I've calculated that it will take far too long to do it this way. I was wondering if there was a script I could use to automate the process. I've attached an example of what I'm trying to achieve. Thanks!

I was wondering if there was a script I could use to automate the process. I've attached an example of what I'm trying to achieve.
Well, then you would’ve come to kind of the wrong place, because there is a Scripting Forum:
Photoshop Scripting
But I doubt that a Script will be an easy solution here.
I wonder if, depending on the material, you might be able to generate an image of the background completely devoid of people (with Smart Object Stack Modes).
And then use that set to Difference against the individual images to create a Mask. (This could be automated, but would probably need quite some clean-up.)
Other than that: Have you tried the Quick Selection Tool yet?
Edit: Could you post a couple of unedited frames?

Canon 5D3 Transcoded Files Blacked Out in Browser

Hello. I am working with FCPX 10.1.4, OS X Yosemite 10.10.2.
I imported my Canon 5D MKIII .MOV files into FCPX and had them transcoded to Optimized/Proxy files. The length of each clip is fairly long so I stepped away.
When I came back, my files are blacked out in the Browser and when I drag them to use into my timeline they are also blacked out.
I've tried trashing the preferences and restarting my Mac and FCPX but can't seem to figure this out.
How can I fix this?

Embed all your video/audio as Flash content, which isn't terribly easy as it requires *hand-coding javascript* elements.
No, it doesn't : [flash video|http://www.wyodor.net/MoreEmbed/flashvideo.html]
Besides that, copy/paste isn't all that difficult.
Lots of Flash video players [here|http://www.wyodor.net/iFrame>.
And here are tutorials that explain how to embed such movies, or other HTML code, in an iWeb page.
[Using the iWeb HTML Snippet|http://www.wyodor.net/blog/archives/2009/07/entry_213.html]
[How to add a movie to your blog |http://www.wyodor.net/iWebBlogTest/Wyodor1/archives/2009/05/entry35.html] (Don't be misled by the title. It works equally well in iWeb.)
You may have to learn HTML/CSS/JavaScript.

Standard def STB repeatedly blacks out for a second or 2

A site search on "black out" does not turn up a similar issue, of course it may be my search skills are lacking.
New subsciber since Sep 2010. I have 3 boxes, 2 standard QIP2500 phase 3 (basement/MBR) and 1 hi-def (LR). Hi def TV in MBR, standard in other 2. Both standards would on occassion 'black out' for just a second or 2 ever since original install. No problem with the hi-def. One standard is wired with coax, one with s-video, the hi-def with HDMI. When the black out occurs, the screen will freeze for an instant, then the screen goes black, then it comes back. The information on the box does not black out, the TVs don't power-off and restart. It's just the screen goes blank and then comes back. It happens without any seeming warning, and will happen at any time of day. Sometimes it will happen repeatedly, sometimes it won't happen for a long time. Both boxes have been repeatedly reset and rebooted with no improvement. During one tech call the tech had me relocate one of the standard boxes to the hi-def location to isolate that it wasn't a location (in-house cable) problem. I thought it curious since it was happening at 2 different locations but went through the drill anyway. The relocated standard worked for a few minutes, then went black for a second as the problem does. Plugging the high-def back in resolved the issue at that location. The tech said he would send 2 new standard boxes. The replacement boxes have not resolved the issue. Any suggestions?

if it's doing that on two different boxes using both coax and s-video then I think that leaves a possibility of the coax. that would be a unusual symptom of a bad coax/splitter but try this.
Wait for it to start acting up - when it starts acting up, stay tuned to that station, and hit your menu > customer support > in home agent > network diagnostics and click ok to start.
check the video signal using that menu selection. after it's done running it will give you a general message like "you're video signals are not in the optimal range" after you see that, hit info and then look at the SNR DB it should give you a number.
32-36 is optimal, below that is questionable.
If it is below that then it's probably going to be a problem with the splitter at your house, and you would either replace it yourself, or call verizon to replace it. be sure to tell them the DB

MBP C2D 15" display blacks out!

My week old MBP C2D 15" blacks out on me. I find that it happens when applying light pressure on the back side, at a surface square underneath F1 - F5 - F - Caps Lock. Light pressure makes it flicker, a little harder results in complete black out. Obviously a production fault and I will of course take it in when I have time... this is my work tool so no way I can just leave it in for days. But that is another issue. Maybe someone else experience the same black out? My build is 8N1037

Hello
Did you find out the reason? The same message shows up in the system.log of my iMac Core Duo after the Mac OS X 10.4.9 Update, but the iMac works fine.
Cleaning all caches, repair user rights, PRAM and SMC Reset didnt help. Also no luck with Preferential Treatment tool to check for corrupted preference files, it didnt find corrupted plist files.

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

AshwinVC wrote:
I reset the system and issue gets resolved.
How?

Vendor Open Items for each Segment ?

Hi all,
What is the most effective way to grouped the all Vendor Open Items for each Segment ?
I think i should use tables BSIK and (BSEG or FAGLFLEXA).
Field BSEG-SEGMENT does not always have a value (often is empty), so it is likely to be used FAGLFLEXA-SEGMENT.
Thanks in advance
Serena

.

Simulation black out each segment

Similar Messages

Maybe you are looking for