Simulation does not run at all

I have made up some diodes using the component wizard, such that the diode acts like a perfect switch at 0.7 volts.  For some reason SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  So the diode model is the problem.   Any ideas how to get it working?  Attached is the multisim file
Thanks in advance!
Solved!
Go to Solution.
Attachments:
perfectbridge.ms13 ‏62 KB

"------ Checking SPICE netlist for perfectbridge - Thursday, February 05, 2015, 11:51:34 AM ------
======= SPICE Netlist check completed, 0 error(s), 0 warning(s) =======
Model 'diodeperfect__perfectdiodes__1': Parameter 'IS' must be greater than zero
doAnalyses: Incorrect use of model parameters
Simulation canceled"
So:  Right click on one of the diodes, select "Properties" - "Value" Tab - Press "Edit model" button - Check "Use default" box for "IS" - Press "Change all 4 components" button - Press "OK".

Similar Messages

  • Downloaded 9.2.0.1 installer does not run at all on win2000 server

    Neither setup from the root of the downloaded disk 1 nor /install/win32/setup.exe archives are not corrupt (tested them) path to disks does not contain odd characters.
    I'm accessing the box through RAdmin, - may this affect install somehow?

    Thanks, RAdmin is indeed remote desktop software, but problem was not quite that, - looks like installer did not like either videocard drivers or 16-color mode I set to save bandwidth...
    9.2 installer works fine now, but now there's exsactly the same problem with 8.1.7 (both before and after 9.2. install and both with old and new video mode).
    Btw exsact version of windows is Win 2000 Server SP4 (Russian).
    Thanks in advance for any insights.
    Message was edited by:
    user458794

  • Firefox 6.0 crashes every time I try to use it. Does not run at all.

    My firefox recently upgraded to 6.0. As of the upgrade, I have completely lost any ability to use the software. I get a crash error message EVERY TIME I try to use firefox now. Please help me get away from IE.

    -> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications(softwares) before Starting to Run Scans.
    * Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
    * SuperAntispyware - http://www.superantispyware.com/
    * Windows Defender Home Page - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    * Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
    * Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
    There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
    * Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
    * Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
    * SWI Forums - http://www.spywareinfoforum.com/
    Check and tell if its working.

  • Montly depreciation simulation does not run for asset with custom depr keys

    Hello!
    Some assets in report S_ALR_87012936 display annual depreciation simulation even if only a period of the year is selected. For those assets a custom depreciation keys is defined. Is that a problem?
    Could I found a way to simulate depreciation for a part of the year for those assets yet?
    Thanks
    Giovanna

    hi,
    ccheck your settings in trx. S_ALR_87009113
    A.

  • An error has occurred while trying to load the files required for firefox .....so firefox does not run at all

    HTC Android I have latest version

    Hi,
    I'm sorry you're having this problem with Firefox mobile. You might try going to settings - manage applications on your device and uninstall Firefox and then install it again.
    Thanks,
    Michelle

  • Javascript does not run properly in Firefox

    Firefox does not run javascript properly.
    For example:
    http://vk.com/app2622342_40916334#NEW/comp1427
    Comment form does not run at all in Firefox ( the last version = 20.0.1)
    but runs OK in Opera.
    WHY?
    Mozilla still is HALF-DONE SOFTWARE!!!!!!!
    WHEN YOU DO IT IN A GOOD WAY?

    I have javazcript-enabled = TRUE in my about:config. So your comment did not solve my problem. I noticed that javascript does not run properly in some websites (forms in vk.com) but those forms run OK in OPERA - how can you explain this!?
    And I have no errors in the Web Console (Firefox/Tools > Web Developer).
    I wrote you a link to the page where javascript does not work.
    ( you need to login to vk.com to see that page
    http://vk.com/app2622342_40916334#NEW/comp1427
    )

  • Satellite P850-30W - Fan does not run after coming back from sleep mode

    I got a Toshiba Satellite P850-30W with bios 1.90.
    Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
    This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
    Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
    I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
    ...this error could potentinally damage the laptop...
    to get the fan running again I have to restart windows
    anyone else experienced this?
    I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

    What kind of answer do you expect here in user community?
    Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
    In other Forum you can read about Satellite notebook; but is it exacts the same model?
    No, it seems to be an L650 series. Its completely different series .
    From my opinion its not software related problem.
    BIOS issue?
    Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
    It could be a hardware related issue. Memory? Maybe
    In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

  • Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

    following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
    Also mail not loading. The error report suggests that I look for updates from the app store?

    http://www.apple.com/support/mac/app-store/contact/

  • My Time Capsule has quit backing up - now spends all it's time "preparing".  I've tried the Apple suggestion of a reset which does not help.  All indicators seems to be OK.  Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe.  Any ideas?

    My Time Capsule has quit backing up - now spends all it's time "preparing".  I've tried the Apple suggestion of a reset which does not help.  All indicators seems to be OK.  Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe.  Any ideas?

    Hello,
    Thanks for your message, I have attempted to repait the permissions as tou suggested.  The first time this produced a long list of exceptions and took quite a while, however although it said "Permissions repair Complete" when I ran it again there were still about 20 exceptions, I have repeated the procedure and this is unchanged.  The Time Capsule now does not spend hours "Preparing", but the backup attempt fails after a few minutes with the error message "The backup volume could not be mounted."  Any further ideas would be appreciated.   When I use Disk Utility I can't see the Time Capsule volume, if I could I'd be tempted to re-format it and start from scratch. 

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

    Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • ICal does not run one event that has a Applescript attached to it. 24u?

    I have a number of reoccurring events in iCal that run a Applescript.  Tow of them refuses to run.  I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
    so I thought I have a look in the log and found this 24u information. 
    can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem.  Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
    They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
    Thanks.
    Log today:
    19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

    Hi,
    It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
    I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
    Alternatively you could look to see if the Applescript really needs to use it.
    Best wishes
    John M
    Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Maybe you are looking for

  • How To: Fix USB Problems in Windows 8, Windows 7, and Windows Vista

    When I go into the Set Up menu when my Toshiba L770-PSK3SU-00L00C and try to prioritize the boot menu to boot from usb first it is not even listed.  The BIOS is the most up to date BIOS v230.  If I press f12 when booting it does have the option to bo

  • Adobe Photoshop OpenGL

    Hi I am using a 3 year old Lenovo 3000 N100 (type 0768) laptop running Windows XP Pro SP3. I am also using Photoshop CS4 which ships with OpenGL zooming technology. In order to use this feature I need a video driver (nvidia I believe). I don't know w

  • Urgent - please help with parsing HTML

    Hi, I'm very new to Java - i'm a biology major, actually, but taking this class for fun. Unfortunately, I'm having quite a bit of trouble with it. I've written a class that downloads a web page, converts it to a string, and then sends the string to a

  • Client Copy Error on ECC 6.0

    New install of ECC 6.0. Attempted to perform a client copy of 000 and received the following message: "Cannot open log: iscap02sapmnt\trans\log\CC001088.ECC Message no. TA074 The action you requested writes a log file. However, log file iscap02\sapmn

  • YouTube not accessible

    I am not able to access Youtube. The icon is frozen. Yesterday I did app update.without Yt I find ipad half the worth