Simulation of Creation of Deliveries in Mass

I am familiar with the transactions in SAP that would allow you to create deliveries in mass. However, I am not able to find a transaction that would enable me to simulate the creation.
I have (n) sales orders and each sales order will create a delivery. If one of the deliveries fails, I cannot have the other deliveries be open. If there are (n) sales orders, then I need to make sure that (n) deliveries. I would like to find a simulate option so it avoids me from having to delete the deliveries that were created where I cannot create all the deliveries.
At the moment, the only trick would be to create one delivery using all the sales orders. If it is successful, then I can delete the delivery and then go forward with the mass creation of deliveries. In this situation, I would only need to delete one delivery, but it would still take time to create and delete.
Any comments and ideas would be appreciated.
--Vince

In SD, We do not have any concept of simulation, as available in MM.
Regards,
Rajesh Banka
Reward points if helpful.

Similar Messages

  • Why there is no manual creation of deliveries for STO...

    Individual(VL01N) : You can create one delivery for each sale order on the screen. There is no manual creation of deliveries for STOu2019s. Transaction VL01N
    Why there is no manual creation of deliveries for STO...
    Thank you very much.
    Hoolaa
    Edited by: Hoo Laa on Mar 28, 2011 12:28 PM

    hi ,
             you have  to create a sale order process to delivery the tcode VL10B for STO Porcess. not VL01N.
    Regards,
    A.Sithanandan

  • Creation of deliveries automatically in VA02

    Hi,
    I am creating a sales order , in my customized program  .
    Now i open the transaction VA02 , with the sales otder created.
    now i save this , now i get the nessage that "the delivery was created ".
    My requirement is that , the deliveries should be created automatically , this is to be done in my customized program . how can i do this .
    Please help me ...

    Hi,
          You need to consult with the functional guys. ask them to define the copy controls and configure the system (using SPRO transcation). you need to maintain parameters like for which order type you want to create automatic delivery creation etc..
    reward points if useful,
    Regardsm
    Niyaz

  • Creation of deliveries using BAPI

    I am creating sales order using my customized code . In my code i am using a
    BAPI_SALESORDER_CREATEFROMDAT2for this .
    when i use this sales order , in VA02 and press enter and than save the message displayed is the delivery is created , deliveries are stored in LIKP and LIPS.
    now the requirement is that , the deliveries are to be created automatically by passing value 'A' to the BAPI " BAPI_SALESORDER_CREATEFROMDAT2"
    But i dont know, to which field i should pass this .
    Can yo please help me regarding this
    Thank you!

    HI
    Re: BAPI function create Customer master(T-code XD01)??
    For XD01-- account group and customer number are mandatory.
    Re: BAPI for creating customers
    Regards
    Pavan

  • Automatic creation of deliveries in back ground through delivery due lists

    Hi ,
    We are generating the delivery due list by scheduling the Vl10C tarnsaction.But Vl10C tarnsaction only generates the delivry due list.Our requirement is to create deliveries automatically through scheduled background job from this delivery due list.
    Can you please let me know how can I achieve this?
    regards,
    sachin

    Hi Sachin,
    You can set up a batch job AUTO DELIVERY GENERATE using SM36 T-code
    Here you can give the variant of your choice. You can make the system create delvieries based on shipping point or sold to parties or plant. All this can be set up in a variant.
    To set up variant use SE38 T-code input program RVV50R10C and then select Variants radio box and then click on create.
    You can also create a variant with sales organization or distribution channnel.
    Once you schedule this batch job in SM37 T-code using menu and immediate schedule or on periodic basis, system will call for VL10 T-code or VL10C based on variant and will automatically generate deliveries in background. Manual interference is NOT required.
    Feel free to revert back with questions if any!
    Regards,
    Syed Nasir

  • New object type creation...in MASS transaction..

    Hi,
    I want to create new object type for Maintainace plan mass mainainace how to do it....can anybody tell me..??
    In standard MASS transaction i am not getting object type for Maintainace plan
    Regards,
    San Rao..

    hi
    O1CL-->select Table you asscosiate with class type( If it it not exists the click on New Item)
    ->Lets consider that it is MARA>double click on Plant->click on object types>click on New Item--->click on Object
    Similerly maintain class status,Org Area etc
    You can also check the existing class for Example...this will help you.
    Regards
    Sujit

  • Simulating Delivery creation and Picking

    Hi All,
    I have a requirement to create an FM which could perform SIMULATION of delivery create and simulate togther. Does anybody has any thought on this?
    Thanks,
    Prakash Pandey

    Hello Friend,
    For delivery
    BAPI_OUTBOUND_DELIVERY_CREATE (if it is inbound then INBOUND)
    For picking or packing
    BAPI_GOODSMOVEMENT_CREATE
    Please check the movement type applicable for your case
    *{check the correct spelling of the FMs!!)
    Thanks
    Krish

  • Automatic creation of deliveries in back ground

    Hi All,
              I want to create a automatic delivery via background scheduling.
    I have created the variant for the program RVV50R10C. I have created the role. can u please tell me how to assign the role in the program? The role field in user role tab is disabled. How to make it enabled?
    Regards,
    Niyaz

    Hi Niyaz
    If it is simply to create a Delivery automatically in the background, then you can set your "Sales document type"  like "Cash sale".
    In VOV8, in your sales document type make the settings and save it.
    Shipping condition --- "10" (immediate)
    Immediate delivery --- Activated
    Lead time in days --- Blank
    Now when you create an order and save it, automatically Delivery will be created in the background.
    Just check,if meets your requirement.

  • Mass update of Outbound Deliveries

    Hi Guys
    Simple question
    Does anybody know of a transaction where I can change the 'Actual' delivery date in Outbound Deliveries on Mass
    Regards
    Frenchy

    The requested delivery date can be changed using Mass Maintenance (t/c MASS). The business object is BUS2032 for Sales Order but don't see any for Delivery mass update.
    Alternatively
    1) Extract all the document no's to be changed
    2) Run LSMW and record a script, prepare the template
    3) Fill in the template , create a flat file and run it in the system

  • Return process in Scheduling agreement and correction delivery creation

    Hi Experts,
    I have couple of Questions:
    1) I want to know the return process in case of scheduling agreement, how exactly we should go about it.
    2) Regarding creation correction deliveries in the scheduling agreements.
    I enter in a valid scheduling agreement number into transaction VA32, click the "JIT DlSch" button, click "Corr. Delivery" button and then enter in a date and quantity.
    After I hit "Save" button, I am taken back to the initial VA32 screen and see the following message...
    Sched. Agr. w/ Rel. ####### has been saved (no delivery created)
    Message no. V1261
    Does anybody have any insight to why this is happening? Thanks in advance.
    Sourabh

    Whether it is a scheduling agreement or sale order, in case of returns, you need to generate the following:-
    a)  Return Sale order or scheduling agreement referencing the parent billing document
    b)  Return delivery if goods are taken back in parent plant via VL01N
    c)  Credit note to customer via VF01
    d)  Excise credit via J1IH
    Last but not least, please spell the name correctly.
    thanks
    G. Lakshmipathi

  • 2 deliveries created for the same sales order

    2 Return Del docs & 2 credit notes were created for one return order no.  
    Posted: Apr 17, 2008 5:33 PM       E-mail this message      Reply 
    Dear SAP Support,
    I would like to know why does the system created 2 return deliveries with the same qty for a single return order document no.? One return delivery doc.no. was created 2 mins earlier than the 2nd return delivery document no. on the same day. After these 2 return deliveries were created, a credit note was also created for each return delivery doc. number. Here is the document flow:
    On Jan. 10, 2008, the Return Order was created
    The Delivery block field is set to 90- (Return block)
    The Billing block field is blank
    On Jan. 14, 2008 @ 12:08:44, the 1st return delivery doc. no. was created. And on the same day also @ 12:10:44, the 2nd delivery doc. was again created.  These 2 deliveries were created by 2 users. 1st delivery is by manual job, the 2nd is by background job processing.  there was a 2 mins. interval for these 2 deliveries.  
    On Jan. 21, 2008 @ 9:47:33, the 1st Credit Return Note was created. And on the same day also @ 9:48:00, the 2nd Credit Return Note was again created.
    In my initial investigation, I found out that there were changes made on the return order document before the 2 return delivery documents were created. Below are the changes that happened:
    On Jan. 14, 2008, @ 9:25:22 hour, the following changes occurred:
    a) Delivery block was changed from 90 - (Return block) to blank
    b) Billing block was changed from blank to 08 - (check credit memo)
    On Jan. 14, 2008, @ 12:08:44, T-Inv Comb field was changed from DC to C
    On Jan. 21, 2008, @ 9:47:20, the Billing Block was changed again from 08 - (check credit memo) to blank
    Will the above changes, contribute to this issue?
    I am also suspecting that the timing on the creation of deliveries via manual job and scheduled background job processig could be the root cause because of the slim time frame between the two job?  
    I hope you can help me get an explanation to this and how this can be avoided.
    Thank you very much in advanced for your help on this matter.
    Hoping to hear from you soon.
    Kind regards,
    Cynthia M. Ondillo
    SAP SD Functional Support

    Hello Jonathan,
    Yes, the  'update document flow' box is ticked and the entry in the 'Pos./negative quantity' field is '+'
      Target delivery type is LR - Returns Delivery    Source sls doc. type is ZRE - Coats Returns Order
      Item category is ZREN - Coats Returns Item
    Since we do not see anything missing in the above setting, can we say that it is a system bug when running manual delivery job close to the time for running the scheduled background job? 
    If it is a system bug, how can this be corrected?
    Regards,
    Cynthia

  • Availability check for deliveries

    hello all!
    i am trying to setup for following situation:
    stock: 10PC
    production order demand 1.5.: -10PC
    sales order demad 1.7.: -10PC
    purchase requisition 1.7.: +10PC
    the production order has confirmed the 10PC from stock, sales order 10PC from purchase requisition.
    creation of deliveries should only consider free available stock, meaning if i want to create a delivery today the 10PC are not available because reserved by the production order.
    how would you setup the availability control for sales ordes and production orders (activate cumulated qties?)?
    best regards,
    matthias

    Hi
    The productio order is on a different date than the sales order.
    What are you trying to achieve by activating cummulative quantities?
    regards
    Sidi

  • GTS Stop delivery creation for blocked sales orders

    We implemented Note 579357 to stop the creation of deliveries when sales orders are blocked and everything works correctly except for rush orders (order type SO).
    After the note was applied, deliveries are not automatically created for rush orders even though the orders have gone thru screening in GTS and have been released.  Any solution to this problem???

    Dear GTS experts,
    I'm facing exactly the same problem with rush orders that Sammy Chan describes in his original post.
    I checked all replies but I have still no idea to solve this issue. The problem is that when creating the delivery during a rush order creation at the time the system reaches the copy condition with the implemented coding there is no order number available to check against in GTS.
    As the whole thread is marked as answered I hope someone can help me.
    Best regards,
    Ulrich

  • Mass deletion of Outbound deleveries

    Hi
    Can any one pls let me know if theres any transaction for mass deletion of Outbound deliveries? We have some 600 OBDs to be deleted. Jus want to know if theres any such trxn or we need to create a BDC prog for that?
    Thanks!
    BR,
    Sri..

    Hi
    there is no process of deleting deliveries in Mass.  If it is a one time activiity you can record a transaction VL02N for delete delivery.  Download the same to excel and update all your deliveries and upload the file and run the recording.  This will delete everything in back ground.
    You need to create a file something like this for all deliveries in one file with this recording.
         0000     T     VL02N     
    SAPMV50A     4004     X          
         0000          BDC_CURSOR     LIKP-VBELN
         0000          BDC_OKCODE     /00
         0000          LIKP-VBELN     82212977
    SAPMV50A     1000     X          
         0000          BDC_OKCODE     /ELOES_T
    If it is a permenent thing then you have to go for a BDC program.
    Regards
    Yatin Thakkar

  • Can't start up AXI4 BFM simulation, XPS 14.7

    I created some template peripheral which works in hardware. I want to simulate it now in BFM. The BFM simulation model creation tick was marked during the peripheral creation in wizard. And appropriate files were created as well.
    I did compile the HDL libraries as well, without any errors.
    However, when I start up the simulation, I got the following error:
    # ** Error: (vsim-3033) C:/Xilinx/14.7/ISE_DS/EDK/hw/XilinxBFMinterface/pcores/cdn_axi4_lite_master_bfm_wrap_v2_01_b/hdl/verilog/cdn_axi4_lite_master_bfm_wrap.v(145): Instantiation of 'cdn_axi4_lite_master_bfm' failed. The design unit was not found.
    # Region: /bfm_system_tb/dut/bfm_lite_processor/bfm_lite_processor
    # Searched libraries:
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/unisims_ver
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/edk/cdn_axi4_lite_master_bfm_wrap_v2_01_b
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/xilinxcorelib_ver
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/secureip
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/unisims_ver
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/unimacro_ver
    # C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/edk/cdn_axi4_lite_master_bfm_wrap_v2_01_b
    So it didn't find cdn_axi4_lite_master_bfm, and some others:
    cdn_axi4_master_bfm
    cdn_axi4_slave_bfm
    The folders which it was looking in had those compiled libraries 
    The folder: 
    C:/Xilinx/14.7/ISE_DS/ISE/verilog/mti_se/10.2c/nt64/edk/cdn_axi4_lite_master_bfm_wrap_v2_01_b
    Has typical files like, _info, _lib.qdb etc. (the result of complxlib process).
    Why is the tool still saying that the design unit was not found? 
     

    the direction was kinda right, thanks.
    To be more precise, I had to do the following:
    Open the “mti_secureip_cell.list.f” from the “C:\Xilinx\14.7\ISE_DS\ISE\secureip\mti” folder
    Append this line: “-f $XILINX/secureip/mti/axi_bfm_mti/axi_bfm_cell.list.f”
    In EDK, go to EDIT->Preferences, and compile libraries.
    And then start process as usual again.

Maybe you are looking for