Simulation or planning versions or histiry of changes in shifting dates?

is it possible to simulate shifting of dates? or keep a history of dates shifting of activities in a project?

hi,
Check the project profile configuration as well as the network parameter setting config.
Regards
Sreekanth

Similar Messages

Organizational Management Plan Version Lock

While planning personell costs we use several plan versions in addition to our active version 01. We would like to block or lock access to the plan versions once our budget is complete. Does anyone have any ideas on locking OM versions?
Thanks for the help,
Eric

Hi Eric,
I think it is not possible to lock the plan version but work around might be to create two separate authorisation roles. One with PLOG authorisation objects to your plan version with all relevant change function codes INSE, DEL, AEND etc and then another role with only DISP and LISD for the same plan version. When the plan version should be locked role to change could be removed and display role assigned.
Maybe bit more maintenance than just flicking a switch but should work if there is no other solution.
Regards,
Saku

/SAPAPO/OM17 Planning version 01PLV0000001~user only in LiveCache

Hi,
I am running SCM5.0 and while checking consitency of LiveCache and DB in /SAPAPO/OM17 I get error /SAPAPO/OM_SYNC002
planning version in LiveCache only.
How could I fix this problem? What does it mean?
In SAP there is only planning version 000 known.
Thank you.
Best regards
Christian

Hi,
my sap message I opened additionally was answered!
Planning versions like 01PLV0000001~user are generated test data (from transaction /SAPAPO/OM17) which does not exist in database. These versions can be corrected, no productive data will bedeleted.
Best regads
Christian

User Exit in APO to change Planning version defaults

Hi,
Is there any user exit/BADI I can use to User Exit in APO to change Planning version defaults.
Regards,
Tarun

Hi Emmanuel,
I am searching for this exit in APO-DP.I have a requirement where we CIF master data (location) from SAP R/3 to SAP APO.However the location are saved in default planning version/model ( ie 000) I need to save these locations in another planning version and I am looking for an appopriate user exit/BADI which can accomplish this.
Regards,
Tarun

Difference between Planning Version and Simulation Version

Hi friends,
What is the difference between Planning Version and Simulation Version?
Thanks,
Debi

Debi
There are a lot of threads in this forum that give detailed info about version concept. Also you can refer to help.sap.
Anyways , planning version is the version against which your live cache data is stored. The data against this version is the one that the planners and buyers are going to refer to or use to make their planning and buying decisions. Data against the planning version is nothing but data relevant to the business .
There may be instances where you would like to simulate some scenario. If you want to do trial and error analysis and at the same time if you do not want to impact the actual business data , then you create simulation versions and simulate your scenario.
For example your actual sales orders received for the month of March may be 100 CS. This is the actual number that will be stored against your planning version. Lets say the demand planner wants to find out what will be the impact if there is a sudden bulk demand from a new customer for 500 CS - that is if he wants to do a what - if analysis then he can create a simulation version and try to check the impact .
Thanks
Aparna

Planning Version Mgmt

Hello Gurus -
I have a few questions in planning version management. Appreciate if you can help me out.
Scenario: I have some planning data in the active version 000 and I have used "/SAPAPO/VERCOP - Copy Planning Version" to create a new version 001. Now I have the same data in both 000 and 001.
Then I went on to change some planning data in 001 to do my what if analysis and I arrived at a final plan which I want to see in 000.
Question: How do I do this? Since we cannot just copy it back to 000. Do we have to replan it in 000? Or do I have to delete the existing 000 and then copy/create 001>000? How is this normally done?
Appreciate your help!
Varun

Thanks Harish -
I am copying order series data, so I would be using the merge functionality. However the help document says :
SNP orders are not permitted to be published directly into the SAP R/3 system. Communication with the SAP R/3 system is only permitted to take place using the Production Planning and Detailed Scheduling (PP/DS) component. The system performs a technical check of the corresponding Customizing for this.
It is not permitted for any releases to be made into or out of SNP until all the planning versions that came from an active version have been copied back into this active version.
AND when I tried to copy my simulation version results back into the active version, system does not let me do it and gives a message " Function not possible because of transfer to OLTP systems" and says I should try avoiding transfer to OLTP system.
But I do need to transfer the Preqs(both SNP and Deoplyment and POs from TLB) to R/3 and my SPRO settings for " Configure Transfer to OLTP System" is setup in such a way that I transfer all output of SNP/DEP/TLB to R/3.
Any idea what could be done here?
Thanks a lot..
Varun

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

Inspection lot creation based on "right" inspection plan version

I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
Is it possible ?
When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
Regards
Silly

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

KP98 - Actual Prices do Not copy to plan version

Hi everyone,
I'm attempting to do a KP98, so that I can have a copy of my actuals in my plan version. The transaction works fine in copying everything I selected, however when I check my activity prices using for example Tcode KSBT, it does not show me me any prices for my activities.
In other words my activity quantities are successfully copied into my plan version, but NOT the prices.
In version '000' prices exist, but not in my plan versio '100'. Any ideas?
Am I missing something?
Thanks.
Edited by: Ehab Mansour on Jun 23, 2009 10:22 AM

Hi Ramesh,
So if I understand you correctly:
Even after setting the "Price" and "Activity Qty" flag in KP98, it doesn't actually copy the price from version 000 to my plan version 100. I still have to run KSPI to get my price posted in my version 100?
If that's what I understand correctly............... then what's the benefit of setting the "Price" flag in KP98? That's what I'm trying to understand.
Of course if I change my planned values then I have to run KSPI again to calculate the new price.
But if I just do a KP98, WITHOUT making any changes to my planning in version 100, should KP98 just copy the prices from my actuals, and I would only need to run KSPI again only if I make changes to my planning dollars?

Plan Version - FI/CO

Hi,
I am relatively new to FI/CO. I have some queries with regards to version.
1) What is the significance of version? Are version and Plan version synonymous
2) With respect to plan cost there is something called plan version.Does actual cost have something similar? Does budget have something similar?
3) If the answer to Q.2 is 'NO', then does make sense to use 'plan version' to actual costs/budget. Does SAP provide this logic.
Could someone provide me some link/documentation regarding the above mentioned issues.Mail them to [email protected]
Regards,
Roshith

Actual version is zero. The plan version is mapped to
actual in config. there is only one actual version. You can have many plan versions. This allows companies to be flexible to change the plans as needed. Your reports can then be set up to run against the plan version you designate. Version 1 maybe set up a the start of the year. Version 2 could be set up later based on new information. Here's some documentation on version in the IMG for FI.
POINTS ASSIGNED are appreciated
The same concept holds true in CO but the plans are entered independently.
Define Plan Versions
You can define plan versions in this activity. You have the option of posting planning data from each fiscal year to an unlimited number of versions.
Example
You can define several versions of your annual budget plan and base each version on different conditions. You can also create several versions for your financial reports, whereby each report is based on different sales revenue.
Activities
1. To create a new plan version, choose New entries. You can also change an existing plan version.
2. Enter 0 in the column Ld (Ledger). This is the general ledger, and is the only ledger in G/L Accounting where planning can be undertaken.
3. Enter the key for your new version in the Ver column.
4. Specify how the planning data is to be posted:
a) If you want to plan data manually for the specified combination of ledger and version, select Man. plan.
b) If you want to transfer the data from the Overhead Cost Controlling (CO-OM) or Profitability Analysis (CO-PA) component for the specified combination of ledger and version, select Plan Integ.
5. Enter a name for the plan version.
6. Save your plan version.

Process flow of info structure updation through plan version.

Hi Experts,
Can you please suggest me that how info structure get updated through plan versions ???
Helpful response will be rewarded.
Thanks.

Hi,
Logistics → Production → SOP → Tools → Planning Type/Macro → Change or TCode MC8B
-> Create or MC8A
Select Planning Type SOPKAPAM → Enter
You will find the Info Structure -> In the Application Toolbar Select the Header Icon (Planning Type Info or CtrlShiftF2)
In the window Define Planning Type:
Update the information in the Historical Periods as well as the Planning Start Date (Planning Horizon).
Transaction MC88 - Version
Regards,
Naveen.

Add Planning Version in SDP94 header

Hi SCM Gurus,
Is there any possibility to add the planning version information in to the planning book "header", I quote this is because I want the planning version to be shown as the place in attachment. ( through menu I can go to Setting-> Header Information to add version somewhere near the view, but that's not what I want)
Please kindly advise, if I have to make this by user-exit, please indicate the name for me.
Thank you very much!
Br,
Lawrence

Hi Lawrence
Might be completely out of box idea.
If I understood correctly, you want to have this visibility mainly for planner to aware them which version data they are accessing. You could create separate data views for each version and also restrict by authorization.
Once you different versions, you can rename them with versions for example data view name could include version like SNP 104 Weeks (000) and SNP 104 weeks (simulation).
Hope this could help the purpose.
Thanks
Amol

Setting plan version as default

Dear Expert,
How to setting 'plan version', for example: plan version 1 as default in tcode :
s_alr_87013613 (Plan/Actual comparison)?
What is the effect to others reports then?
Thanks in advance.

The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

CTM ending at planning version Upload

Hi all
i am facing a problem of CTM run ending at planning version upload. My doubt is it is because of the Large amount of Logs in OPT 11. Can anyone tell me how to delete the logs through a background job or change the obselete date of the log. I specifically want a background job, not able to delete it from the menu path by entering RFC destination and File name.
Regards
Virender

You can get rid of all application logs including CTM jobs through SBAL_DELETE program. use options that do not refer to expiry dates.
If the deletion option does not work, it might be useful to put the trace file ON and make sure that the size of the trace file is below the SAP recommended limit. Check SAP help on this.

Different plan version for some scenarios in MSS

Hi guys,
Some scenarios of the MSS need to be referenced to another plan version different than the current active.
Then, I'm trying to configuring my Object and Data Provider with the requisites needed. The issue is that how can I tell the system that the plan version is another one??
Any idea??
Thanks for your answers.

Firstly, try to check whether the correct smartform is getting picked or a different form is getting picked. TO identify, set soft break-point inside your program lines or use SF_TRACE.
If it is still picking the same smartform, and it is not showing your changes.. then goto form attributes and check whether it is translated to all languages or not?
I guess, because of one of the above two problems it is not displaying your form correctly.
Regards,
SR

Simulation or planning versions or histiry of changes in shifting dates?

Similar Messages

Maybe you are looking for