Simultaneous capture and playback - is this possible?

Hello all,
I'm looking for a way to simultaneously capture NTSC footage into Final Cut and have that captured file available for playback within another program while it is still recording. Kind of like time-shifting with a Tivo. Does anyone know how to do this? Are there certain software/hardware combinations that would allow something like this?
Thanks for your time,
Mark

Yeah, but it is a complex setup and not cheap.
PICTURE READY.
http://www.virtualvtr.com/pictureready/pickeyaaresofuse.html
Shane

Similar Messages

Is it possible to do the audio capture and playback simultaneously?

In short :
Is it possible to do the audio capture and playback simultaneously? . If it is not supported directly by Sun, pl suggest another way to achieve the same.
In detail:
I am doing a voice chat application by using the streaming through UDP . I am able to play the byte stream. But , is it possible to capture sound simultaneously (while playing the audio) to send to the other end?
Edited by: dhillarun on Jan 4, 2008 7:11 AM

If you're Airplaying from you computer, you might be able to do this. Here's what I would try:
Go to the Airplay icon in iTunes. You should see both your Apple TV and your speakers listed as options. Select "Multiple speakers." You'll see both devices together. Turn the volume all the way down on the Apple TV. You should be getting the video on the TV, but only hear audio through the speakers.
Using the "Multiple Speakers" option will sync the output of your devices so that the sound matches the picture.
I haven't tried this myself, but I'm thinking this would work. However, this approach will only work when using Airplay from your computer – not from am iPad or iPhone – as they don’t have the "Multiple Speakers" option (as far as I know). It also won't work with content streamed directly to your ATV, obviously, because there's no way to stream from ATV to other devices.
Let me know if this works.

CS4 HDV Capture and playback issues

Hey,
I am having trouble with HDV capture and playback on Prem Pro CS4. I tried all the steps mentioned on the article posted by Adobe, http://kb2.adobe.com/cps/405/kb405478.html
None of these steps have helped anything. I used the cleanup utility, re-installed everything and started from fresh and nothing happens. Capture is always out of sync, it ignores in and out points when batch capturing and playback is all jerky regardless of quality settings. The weird thing is, this only started happening out of the blue. I was using it on a project and it was fine. I hadn't used Prem Pro in a little while and then all these problems began. No change in hardware.
I am using Premiere Pro CS4 on Windows 7 and capturing HDV footage via firewire on a Sony Z7.
Any help would be much appreciated.
Thanks!

With Win7, if you have not already done so...
Legacy Driver and Capture http://forums.adobe.com/thread/694890?tstart=0
- And a Picture http://forums.adobe.com/thread/727755?tstart=0

Simultaneous computation and playback

Hey everyone,
I am attempting to simultaneously compute and playback audio
at the same time, but I am not sure how to approach this for my
application. I am computing the audio chunks dynamically by
allowing for real time manipulation of the audio. I have previously
performed all the computation before playing and only updated after
each loop of the approx. 5 sec audio loop. The problem I run into
is that I would like to compute in the background while playing the
audio to the user. Right now I get the obvious periodic spots of
noise in between each section of audio playing because it is taking
time away to compute the next chunk of audio. Can anyone provide
any help/advice or guide me to an example? I took a look at Doom 1
and I noticed the audio can be a bit choppy there also...is that
just what I am left with our can the audio be computed on the fly
(signal passed through a filter basically)? Thanks in advance.

Yeah, but it is a complex setup and not cheap.
PICTURE READY.
http://www.virtualvtr.com/pictureready/pickeyaaresofuse.html
Shane

HT204053 I have 4 iphones on the same Apple ID, but would like 4 different accounts and iCloud is this possible?

I have 4 iphones on the same Apple ID, but would like 4 different accounts and iCloud is this possible?

Create a new Apple ID for the one you want to change.

CS3 - Video freezes on Capture and Playback - Please Help!

Hello all,
Here's the problem:
When Capturing footage via firewire from Mini DV, shot in standard DV, within a standard NTSC-DV Widescreen 48k Project, the picture freezes after 1 second. The audio can still be heard and the footage actually does get captured. However, after the footage has been conformed, and we load the clip into the Source Window and hit play, the video again freezes after 1 second of play. Again, the audio keeps playing and you can move the marker anywhere on the clip and see that all the footage is indeed there, but as soon as you go to play it from any point - same thing, the picture freezes after 1 second of play, making editing impossible. The clip is being captured as an .avi and all capture settings appear to be correct.
Here's the kicker:
- HDV video captures and plays back fine.
- The DV video captured correctly at first, this has been a recent problem going on now for several weeks, after no changes to the system.
- The biggest kicker - after trying successfully to capture, playback and edit HDV video, we closed Premiere, reopened, tried to play the previously captured DV footage and it played just fine suddenly!!! Then we closed the program, re-opened and tried again - back to the freezing problem and it never played back fine again...
Here's the specs (I can give more specifics later if needed, it's my partner's computer):
Sony PD-150 DV-Cam (but recording on Mini DV in standard DV mode, not DV-Cam)
Windows 7
Intel Core i7 3.20 ghz
Asus X58 Motherboard with onboard Audio and Firewire
6 GB Ram
Nvidia Geforce 9 Series with PhysX
Please help if you have any idea how to solve a crazy problem like this. Thank you!!!
Greg

Now that everything is working, make a full drive image to an external USB hard drive
I use http://www.terabyteunlimited.com/image-for-linux.htm

DNIS capture and playback

I'm new to UCCX but hoping someone has some advice on this.
I have a UCCX 8.5 installation and a Communications Manager 8.5 installation at a large university. We have 30,000 numbers in our dial plan but not all the numbers are assigned to devices. In other words some of the numbers are simply not in service.
I would like to play a message to callers when they attempt to call on of these not in service numbers that includes the number they have dialed.
For example:
Caller calls a number that is not in service
Call is redirected to UCCX script
Script plays prompt, something like "The number you have dialed..."
Script captures orginal dialed number (DNIS).
Script plays back DNIS to caller.
Script plays prompt, something like "...is not a working number. Please consult your directory and dial again."
I think the Get Call Contact Info block will capture and store the DNIS I just can't figure how to play the number back. There is a good chance that I'm way off the mark too.
Any help would be appreciated.

Add a play prompt under the get contact info and in the play prompt "prompt tab" put S[] inside the brackets type the name of your string variable that collects the dialed number from the get contact step.
You can combine the beginning and end prompts with the dnis collected info and it should look like this in the play prompt "prompt tab"
P[beginning prompt] + S[dialedNumber] + P[endprompt]
Hope this helps and didn't confuse you.
Regards,
Yosh

I want to sync my iphone, ipad, and macbook with the same username and password, is this possible

i want to sync my ipad, iphone, and macbook with the same username and password. is this possible and if so, how do i do it?

You mean with the same iCloud account?
If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.

Mic audio capture and playback

I've been developing in flash for a while now and now I have
a job developing flash and actionscript 3.0. I have come across a
project with a simple concept but I have found it difficult to
implement.
What I want to do is allow the user to click a button and
record their voice and then I want them to click another button and
play it back. I don't need to save or store it and I don't have
access to a flash media server or any alternative.
Is this possible to do and if so could someone please point
me in the right direction.
Thank you

Here you go. I use this script so I know it works. You need to have at least flash player 10.
You need 3 buttons. 1 record button - linkage = micRec , 1 play button - linkage = soundPlay and one stop recording button - linkage = stopRecord
i keep the stop button off the stage and have it moved onto the stage when the record button is pushed. Then finally move both the record and the stop recording button off the stage when the stop recording button is pushed.
micRec.addEventListener(MouseEvent.CLICK,recordMic);
function recordMic(event:MouseEvent){
micRec.x = -250;
stopRecord.x = 117;
const DELAY_LENGTH:int = 4000;
var mic:Microphone = Microphone.getMicrophone();
mic.setSilenceLevel(0, DELAY_LENGTH);
//mic.gain = 80;
mic.rate = 25;
mic.addEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
stopRecord.addEventListener(MouseEvent.CLICK,SREC);
var soundBytes:ByteArray = new ByteArray();
function micSampleDataHandler(event:SampleDataEvent):void
    while(event.data.bytesAvailable)
        var sample:Number = event.data.readFloat();
        soundBytes.writeFloat(sample);
function SREC(event:MouseEvent):void
stopRecord.x = -250;
    mic.removeEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
    soundBytes.position = 0;
    var sound:Sound = new Sound();
    sound.addEventListener(SampleDataEvent.SAMPLE_DATA, playbackSampleHandler);
soundPlay.addEventListener(MouseEvent.CLICK,SP1);
function SP1(event:MouseEvent){
soundBytes.position = 0;
    sound.play();
function playbackSampleHandler(event:SampleDataEvent):void
    for (var i:int = 0; i < 8192 && soundBytes.bytesAvailable > 0; i++)
        var sample:Number = soundBytes.readFloat();
        event.data.writeFloat(sample);
        event.data.writeFloat(sample);

Hi. I currently have two iPad's and two iPhones and one Apple ID, I want to keep the current Apple ID on one iPad and one phone and set up another Apple ID for the second iPad and iPhone, is this possible?

Hi. I currently have both my iPhone's and iPad's on one Apple ID and I was hoping to use one iPhone and one iPad with another Apple ID, does anyone know if this is possible and how I would do it.
Thanks TMM39

You should be able to. The only hiccup will be that any apps that you have purchased with the older ID you will have to repurchase with the newer ID to be able to keep using them.
Though of course this actually depends on how you plan to use the IDs. For example, I had an Apple ID through iTunes a few years before I opened a .Mac/MobileMe account (what iCloud is now in case you are new to Apple). Thus, my iPhone and iPad actually have two IDs on them, one for iTunes/App Store, and one for anything associated with iCloud. I've never really had any problems assoctiated with having two IDs on one device. Usually just an extra step when I get a new device or have to restore either of them for some reason. Though I understand that this is probably not what you plan on doing, I thought I would use it as an example of what the IDs are really associted with on the devices.

Shut down scripts and command is this possible in OS X

In OS 9 it was possible to install things like Apple Script in the ‘Shut Down’ folder and these would be executed when the computer was told shut down.
Is there such a possibility in OS X? I have some script I would like to be executed when the user hits shut down.
Thanks

V.K. wrote:
you can make a logout hook. see these [instructions|http://docs.info.apple.com/article.html?artnum=301446]. change login hook to logout hook in them.
OK V.K., I think I am getting in over my head.
in the article is says find this line in the ttys document:
+#console "/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow" vt100 on secure window=/System/Library/CoreServices/WindowServer onoption="/usr/libexec/getty std.9600"+
Mine says:
+#console "/usr/libexec/getty std.57600" vt100 on secure
console "/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow" vt100 on secure onoption="/usr/libexec/getty std.9600"+
So not sure how to make the changes it suggests

Clitching during capture and playback

hi there, I have been having some major problems with FCP and my computer...I don't know if they are related.
My HD died on me, so I put in a brand new one...since then, my fcp has been acting goofy.
When I try to capture video and audio (in firewire NTSC Basic mode), the video stops, but the audio keeps going. When I place the clip in the timeline, the audio doesn't follow the video. I did notice though that even with just my capture window open and video is playing from my deck, it will stutter withough even hitting the capture now button.
However, I can capture video on the "non-controlable device" mode, but it has some glithces (pixleated colors that appear in the video), but the audio doesn't get off.
Is this a back firewire port on my computer? I did try a different f.w. cable and it still did it...anyone have a suggestion? Thanks!
-R

Once past the immediate AH HA!, I recognize THAT problem (which doesn't seem to be happening), more basic information becomes necessary to track down the problem.
Video format? DV, HDV, Uncompressed HD of some flavor?
How captured? iMovie? FCP?
External drive type and free space? Firewire, USB, e-sata?
Any filters on the footage?
Sequence settings?
How are you viewing the footage? computer screen only, external ntsc/pal monitor?
And so on.
Cheers,
x

Capturing and Playback

Im trying something and i hope you can help me. I have two Mac computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??

Hi -
Check out Picture Ready.
http://www.virtualvtr.com/pictureready/index.html
I believe it will allow FCP to do what you want.
No personal experience, but I have heard it highly spoken of and in use in mission critical applications like live broadcast TV.
MtD

Outlook and iCal - is this possible?

I work with a Mac (iCal) at home and a Windows (Outlook) at work. Is it possible to sync both calendars with my iPod Touch?

Well, you stop syncing the Touch with the Mac and you start syncing all three devices with either a Microsoft Exchange account or a Google Calendar account. So the first thing you have to determine is whether you already are using a Microsoft Exchange account on your office PC. If so, it is fairly easy on both the Mac and the Touch to use your existing Microsoft Exchange account setting for their calendars.
If you are not using Microsoft Exchange in the office and are just maintaining your own calendar locally on your PC, then you will need a Google Calendar account. You can then sync all three devices using that account.
I should add that to accomplish this you need to be using use wifi on the Touch.

Multiple listeners on the same IP and Port - is this possible?

Hi all,
I think I know the answer but thought I'd ask anyway, as someone might have some suggestions.
So in IIS we can have multiple websites bound to the same IP - this is called "Hostname binding", and means that IIS will check the Host header of incoming traffic before deciding on what to serve.
Can we do anything similar in TMG?
Or, if I want to handle requests for the same port (443) for multiple applications, do I simply need to get another IP address an interface onto the TMG box?
Thanks in advance.

Hi,
When you publish multiple Web sites with different host names on the same Web server, you can install a wildcard certificate on the Web server that can be used to prove the identity of the Web server to the Forefront TMG computer. A SAN certificate can also
be used.
There is a article describing how to configure Web publishing rules in Microsoft Internet Security and Acceleration 2004 (ISA 2004) Server or Microsoft Forefront Threat Management Gateway, Medium Business Edition to redirect HTTP requests from
the Internet to a specific internal Web server by using the original host header.
http://support2.microsoft.com/kb/838252/en-us
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Simultaneous capture and playback - is this possible?

Similar Messages

Maybe you are looking for