Simultaneous change of properties of a large number of objects

Hi there,
is there a way to change the properties, especially the qualification, of a large number (>100) of objects in Universe Designer simultaneuosly?
Or is there another effecient way to import a file that consists of only 5 dimensions and 100 measurements?
Best regards,
Uwe

What exactly do you mena by Qualification ?
Do you want to change the object definition from
tablename.columnname
to
schema.tablename.columnname ?
Regards,
Stratos

Similar Messages

  • Trouble copying a large number of objects using Acrobat X

    Acrobat X is many times slower than Acrobat 9 when copying a large number of objects in a PDF.  What used to take one second in Acrobat 9, now takes upwards of 45 seconds or longer in Acrobat X and often causes the application to crash.  I am using 10.2.1 on OS X 10.6.8.  Has anyone else experienced this performace difference or have any solutions?  Any thoughts on the subject would be much appreciated.  Thanks.

    Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and  image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides.   You do not need a script because Photoshop ships with a Plug-in script to be used in Actions.   What is good about Plugins is the support Actions.  When you record the action the plug-in during action recording records the setting you use in its dialog into  the actions step.  When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch.  The Action you would record would have two  Steps.   Step 1  menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height  fields.  Step 2 Canvas size enter 1020 pixels in width and height  not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
    The above script will also work. Its squares the document then re-sizes to 1020x1020  the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses  like the action canvas will be added to two sides.

  • How to upload a large number of object states?

    Hello,
    We are working on a quiz/poll app and have 582 object states in one page. The file doesn’t respond while uploading and InDesign doesn’t react anymore. There are several button and sound actions inside the states. Does this mean there is a limit to the number of object states? Or does anybody know another solution to upload this document?
    Cheers,
    Edward van Eck

    You should re-design your page to reduce (drastically) the number of object states. There's no way that many object states will render well on mobile devices with limited memory.
    Neil

  • Table Properties: Tweaks for large number of records

    Hi experts,
    I have a small table, about 5 columns, which will store records numbering in millions (at least 7 million). Is there any specific list of properties/checklist that I need to look into and ensure that the db health is good?
    Regards,
    Anand.

    Make sure you have appropriate indexing for your query needs. Make sure you have sufficient and complete declarative integrity constraints in place - yes foreign keys and check constraints matter and affect query plans. Seven million rows is not necessarily a lot, however you might consider how the data is accessed, used, and purged and see if partitioning is appropriate ( if you are licensed for the option). Also, make sure the SQL is efficient as possible - for instance if you are updating this table using a cursor loop, all it will do is get massively slower over time.

  • How can I get my printer to not change the font from any larger number than 10

    Is the problem in the printer or in the computer, I have a Dell windows 7

    I understand that you are finding issues while printing certain fonts with font size >10
    Please try to provide more details about the application software used, printer model and additional information which might help to understand the issue better.
    In general, the application software controls the complete page formatting (page layout, text/font size etc.).  Information or print commands sent by software will override the certain print driver settings and driver will convert the job to printable data.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • Querying for large number of objects... searchspec limitation

    As part of a product i'm developing i may come across a scenario where i need to query for 100+ specific objects based on ids.
    I know the query input for WS 2.0 has a "searchspec" string field, but based on the sheer number of specific objects i need to query for i'm afraid the string may eventually get too large.
    Is there a way around this? Can i send multiple individual queries in a batch request? Can i add more than one search object to a single query page request? Anything?
    Thanks!
    -Kevin

    A few options available using the WS v2.0 Query methods:
    1. Use Arguments like page size and startrownumber arguments. This will allow you to specify the pagesize of the recordset to be returned and also the starting row number.
    2. The searchspec is a powerful argument and it supports a set of binary and unary operators. Refer the Ondemand user guide for a more complete set of operators supported by searchspec. To narrow the results of your query, you could use the "AND" operator between 2 or more fields in your object query.
    Hope this helps.
    Jaya

  • I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

    Does this involve iPhoto in some way?

  • I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

    I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

    iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
    One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

  • Easy way to change large number of macs to Auto proxy (.pac) file

    Hello all,
    I need to change a large number of machines over to using a pac file instead of the current settings for secure and web proxys.
    It's not possible using 10.4 CLI command "networksetup" but I'm wondering if anyone may have another way of doing this ? Possibly a script or something ???
    I have seen in the 10.5 version this is now possible, but don't know how (or if it's possible) to get the new "networksetup" to work in 10.4 ...
    Mitch

    The site  has been around for years, and has done ok on a few search terms, but on others it is doing very poorly... and I believe that these changes will only improve things. As currently the descriptions arent very good.
    thank you for your help btw!

  • How to change Org Unit for larg number of emplyees

    Dear Guru's,
    My client has uploaded wrong Org Units while hiring, now that has to be changed for larg number of employees.
    Can any one suggest me how can we do this for larg number of employees?
    Thanks in advance for your kind suggestions.
    Regards,
    Srinivas

    Hello Srinivas;
    By saying uploaded wrong organizational units, do you mean that organizational structure in PPOME is wrong or employee - position assignment is wrong?
    If employee - position assignment is wrong then I suggest you to use batch input program or use LSMW as you have to change it via personnel action - PA40
    If organizational structure is wrong, then do you have correct organizational structure in another system like test or qa?
    If you have correct organizational structure then you can directly transport it from one system to other but if you don't then you first need to correct the organizational structure and then run LSMW or batch input.
    Regards;
    Okan

  • Canvas Resize to Square for a large number of images using script. E.g. image is currently 1020 x 600, I would like to change this to 1020 x 600. PLEASE HELP

    Hi All,
    I have a large number of images that I need to resize the canvas sizes to a square, the images are currently in different sizes. For example, if an image is 1020 x 600 I would like to change the canvas to 1020 x 1020 so that the image becomes a square. I am using CS3 and all the images are jpeg's. I have done research on scripts but the ones I have tried have not worked. Please help.
    Thanks.

    Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and  image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides.   You do not need a script because Photoshop ships with a Plug-in script to be used in Actions.   What is good about Plugins is the support Actions.  When you record the action the plug-in during action recording records the setting you use in its dialog into  the actions step.  When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch.  The Action you would record would have two  Steps.   Step 1  menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height  fields.  Step 2 Canvas size enter 1020 pixels in width and height  not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
    The above script will also work. Its squares the document then re-sizes to 1020x1020  the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses  like the action canvas will be added to two sides.

  • LR 3.2 crashing when writing XMP changes to large number of files

    I've been making some minor changes to a large number of images in bulk and have had LR 3.2 stop responding and crash numerous times.  The changes seem to apply to the database, it's just the writing to XMP for a large number of images that crashes (it writes to many, but eventually crashes which is a problem because I'm not sure which ones have saved and which haven't).

    The files are only 2MP each, and I have the same issue when I apply the changes to RAW files and JPG files. The error occurs though before any changes are applied, before the images would need to be recached, as when the error doesn't occur the dialogue box I mentioned pops up asking what to change.
    Your specs sound more then enough I would think. Do you have set the option to Write cache to folders when possible and if so could you uncheck that option?
    I don't have experience with this kind of numbers but I do dump the Bridge cache manually on a regular base (every new cycle it seems to be more stable so more interval in the periods of dumping cache) but my main folder contains usually around 6 to 7 K of DNG files from 21 MP dSLR. This starts caching without problems but takes a few hours before done.
    Can't use the option cache for folder due to a longstanding problem with error message to replace the CacheT file, hence my question about your setting.
    Also I have set the option to previews Always HQ and in the prefs have set the option to build monitor size previews.
    As said, don't know the large numbers but the 2 MP files are very small and it should be possible for Bridge I would think?
    Did you also try to create a new folder and place the files inthere. Or divide them in to three folders for testing?

  • How to handle a large number of query parameters for a Browse screen

    I need to implement an advanced search functionality in a browse screen for a large table.  The table has 80+ columns and therefore will have a large number of possible query parameters.  The screen will be built on a modeled query with all
    of the parameters marked as optional.  Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup.  Is it possible for example to have a search
    button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
    the search results are returned to the table control?  This would effectively make screen b an advanced modal window for screen a.  In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
    re-open screen b and have all of their original parameters still set.  How would you implement this, or otherwise deal with a large number of optional query parameters in the html client?  My initial thinking is to store all of the parameters in
    an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work.  TIA

    Wow Josh, thanks.  I have a lot of reading to do.  What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired. 
    There is an excellent way to get at all of the query information in the Query_Executed() method.  I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
    the query name, user name, and parameter value pairs that the user entered.  Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query. 
    I almost have it working.  It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
    item).  I'll post an update once I get it.  Probably will have some more questions as I go through it.  Thanks again! 

  • I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter.  If that is the case then something is wrong with iPhoto or your perhaps your library.
    How large a date change are you putting in?  iPhoto currently has an issue with date changes beyond about 60 years at a time.  If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
    If that is not the case:
    Remove the following to the trash and restart the computer and try again:
    Home > Library > Caches > com.apple.iphoto
    Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
    ---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
    Let me know the results.

  • How to remove large number of "sent" but still keep them available in case I need to search for something?

    Over several years, I have accumulated some 1400 messages in the SENT folder.
    Lately my Thunderbird is taking a long time for some actions that used to be instant, like selecting another message to read or delet.
    I regularly remove incoming messages to keep the in-box under 300, and I have almost nothing in the other folders.
    I tried changing the "local folders" to a different directory, but when I do that, all the old "sent" messages become un-available for searching and potentially continuing a conversation.
    Is there a way to move the large number of "sent" messages from the "local folders" but still keep them available for access from within Thunderbird, in case I need something from past chains of replies?

    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

Maybe you are looking for