Simultaneous E71 Bluetooth handsfree and Headphon...

I have Bluetooth handsfree (factory) built into my Car Audio that is non-A2DP. So to listen to Audio on the E71 I need to connect through Headphone to the Car Stereo system. When I do this , Bluetooth Handsfree malfunctions. The Audio (that Im listening to )  is silenced when there is an Incoming call that I answer, but the E71 seems to cut-off ALL audio through its bluetooth  as well (I hear silence plus the other end is unable to hear anything I say).
Ideally, I would like to have the listen to my music through the Wired Headphone link, but would like to take the incoming call through bluetooth handsfree. Any way to make both these work together?
Please help if any of you have a fix for this.
dram12

I doubt if this is possible because  there is interlock mechanism (hardware/software) that once the phone senses a head phone is plug into its socket be it from other source, the speaker(mike too) as well as blue tooth profile for head phone are disable. A2DP in blue tooth means it could transmit/receive in stereo.Have you tried to go the web site of that car kit, it could only be an upgrade of its firmware will solve the conectivity issue your facing. Blue tooth connection only without using a separate cable to the stereo system.
Message Edited by android on 03-Feb-2009 01:18 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • IPhone 5 question about Bluetooth headsets and headphone jack audio out.

    I have an iPhone 5. When I'm connected to a bluetooth headset, can I still use the headphone jack to play audio through my stereo between calls without having to disconnect the headphone jack for calls or shut off the headset for tunes?

    when one connects a wires headset it it mutes the internal speaker
    when one connects a bluetooth headset it mutes the internal speaker and any wired connected headsets

  • Bluetooth Adapter and Headphones Woes!! It was Better on OS 2.2.1

    I am hoping someone can help me with my bluetooth scenario. I connect my iPhone to the car stereo via its headphone jack and also to my Jabra SP700 bluetooth device. I cruise listening to the iPod feature of my iPhone and when a call comes in, the music stops and the bluetooth kicks in for the call. I get sound and microphone through the bluetooth. When I hang up, the bluetooth stops emitting sound and the iPod resumes music play over headphones and I am HAPPY!
    With the OS 3.0, that appears to have gone away -- my happiness that is! I have found at least 2 undesirable features:
    1. When I receive a phone call bluetooth kicks in and I can talk fine. However, when I hang up, the music doesn't resume anymore. I have to unlock the phone and hit play again (or double 'home' click) -- BUT now the music plays over my bluetooth headset instead of the headphones like it was before the call. I then have to fiddle with it to return it to 'headphones'. This seems less user friendly than it was before OS 3.0.
    2. If I try to make a call while music is playing, it tries to handle the call via the headphones, but nothing comes out. The bluetooth does not kick in and I can't hear anything. I again have to change the audio option manually once it actually starts ringing. When the call is over and I hit play on the iPod again (yes it does not resume playing like it used to), it starts playing music over the bluetooth adapter -- Again, not what I want.
    I have looked at the settings and I can't find anything to help me out here. I would like an option that lets me state what output to play iPod out of and what channel to interact the phone over. That way I could always have music from headphones and telephony via bluetooth.
    I realize that stereo bluetooth is a cool new feature, but I would just like the option of it working like it did under OS 2.2.1.
    Anyone have any suggestions? Can I easily revert to the old OS?
    Thanks,
    Blaylock

    I'm having a similar issue - only iPhone is connected directly into my iPod-enabled car stereo (through a USB connection to back of stereo/standard iPhone connector cable into iPhone; installed by 3rd party vendor.)
    If I'm listening to iPhone music through speakers (whether from a playlist/iPod selection, streaming Pandora, etc.) and turn on Jabra SP700 device, music is diverted to play through the Jabra speaker instead. This means I can only have the Jabra on when I know I'm going to make a call (I'll temporarily switch car stereo to radio, which doesn't conflict), but it also means I can't use it to intercept incoming calls without taking eyes off of the road, ugh.
    I'm going to try to re-pair the devices later this afternoon - have already deleted my existing JabraSP700 profile on the iPhone - & will try re-pairing the devices later this afternoon. But are there other configuration changes I need to make to either the iPhone or the Jabra if that doesn't work?

  • Bluetooth Headset and Headphone audio out at same time?

    My GF and I were on our way to NYC on Acela and decided to watch a movie to kill time. I inadvertenly forgot to bring my headphone splitter, so I figured I could plug in one set of earphones into the headphone jack and use my bluetooth wirelessely. Upon doing so, the Mac Pro brand new, would only let me select one output via sound preferences. Any ideas or works arounds to allow audio out to both headphone jack and wireless? Is it possible to attach 2 bluetooth sets for wireless capabilities to watch movies?
    Message was edited by: Special Educator

    Yeah I do it. I use a Jabra bluetooth adaptor that uses the headphone port. Then I tuck the luetooth unit under my Marware Relay wristband.
    Motorola S9
    Jabra A120s
    Marware Sportsuit Relay
    Nike + Ipod Sport kit

  • ITunes says my iPhone 4 is updated, but I've got the old Bluetooth version and haven't got the new menues? Music that i've loaded to iTunes directly is not synced to the iPhone either, but the other way it syncs...

    iTunes says that my iPhone is updated, and I've done all the updates, but I've still got an old Bluetooth version and not the new menues. If I download music to iTunes directly that music does not transfer to the iPhone when I sync it to iTunes, but music from the iPhone is copied to iTunes... Any one else who has experienced this and/or have a solution? I'm having big problems with using bluetooth handsfree and I've heard that got better with the new bluetoothversion.
    /Linda

    Thank you for your answer, but no, I've got 7 GB free space...

  • HT204387 can you listen to music with your ipod touch 4g and a bluetooth handsfree device

    can you listen to music with your ipod touch 4g and a bluetooth handsfree device

    Yes if the BT device supports the profiles supported by the iPod. See:
    iOS: Supported Bluetooth profiles
    The A2DP provide is used with speaker and headphones
    The Hands Free profiles (HFP) is typically used with headset (headphones and mic).

  • 6300 and Bluetooth handsfree problem

    I experience this problem with my 6300 and the BH-700 bluetooth handsfree : When the person on the other end talks my mic gets muted and he can't hear me. Ofcourse this also happens if the other end is at a noisy place and then communication is impossible since my mic is always muted.
    This seems like a problem of the phone since it happens with any bt-handsfree. On the other hand the BH-700 works fine with all other phones I tried...
    I upgraded my phone firmware from 4.7 to 5.0 but the problem still remains. I don't want to think that the hardware implementation of the 6300's bluetooth and simultaneously send and receive data!
    Anyone this problem? Any possible solutions?
    Thanks!

    Hi,
    I have simillar problem with BT handsfree - the other side has difficulty hearing me, while I can hear fine.
    Do you have any further experience or solution?

  • Stereo Bluetooth and headphone jack at the same time?

    I'm looking forward to the A2DP support in the firmware 3.0 update. I plan to get a motorokr s7hd. I'd like to be able to output audio from my iPhone 3G to my car via the headphone jack. Can I also connect a stereo Bluetooth headset and just use that in the event of a phone call? Will it mute/pause the music when a call happens?

    You can set the iPod app to output audio to your choice of a BT headset, or the jack output (not simultaneously). A BT headset can still get call audio if paired, but working in one channel only - no stereo.

  • How can I simultaneously play music through Bluetooth and AirPlay to my Bluetooth speaker and Apple TV?

    Hello, I have recently purchased a new Bluetooth speaker and I would like to use it with my already working home audio system which I control with the airplay feature on my Apple TV. I tried to use the airplay function on my iPhone 4S and connect the 2 at the same time but It would only let me connect one. If there is an app that will allow me to connect the Bluetooth speaker and the Apple TV simultaneously thought my iPhone 4S or any other solution please feel free to let me know. Thanks...

    There is not one and it cannot be done at this time.

  • I need to have audio out from HDMI and headphone jack simultaneously

    I need to have audio out from HDMI and headphone jack simultaneously.
    I seem to be able to select one or the other, but not both ? !
    Thanks

    No. You can only use one sound output:
    Why can't I select HDMI audio on my Mac mini?
    If you connect an HDMI display or television to a Mac mini (Mid 2010 or later), you might not be able to select the HDMI audio device (in System Preferences > Sound > Output). This can happen if you also have headphones plugged in to the computer. Unplug the headphones to be able to select HDMI audio.
    Mac computers: Frequently asked questions about using HDMI

  • While listening to music in my car, I don't have the option to choose between bluetooth and headphones anymore. Why?

    On IOS 6 and earlyer, I use to be able to choose between the bluetooth or the headphone jack. Now, I can only play music true my bluetooth and I can't pause the music. Anybody has a solution?

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Bluetooth and headphones

    Can I use my Bluetooth headset and my headphones at the same time for two ppl to listen?

    Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

  • IPhone 4 bluetooth and headphones won't work.

    When I connect to bluetooth or headphone jack. The music/sound plays through my iPhone speakers. I've tried with Bluetooth headsets and speakers. Also with an aux cord and headphones. It just started recently with the latest iOS 7.1.2 update. I will be downgrading my software to see if that works. Couldn't figure out what what going wrong.

    Figured out that, with the update, the new pull up menu has a place to change where the sound plays through. It loaded it as default to the phone. All I had to do was change it. Whoops.

  • Right side sound only works over Bluetooth and headphones

    Yonly the right speaker works over Bluetooth and headphones. How do I get my left speaker back?

    Turn off Mono audio.
    Settngs > General > Accessibility > Mono Audio > Off

  • I need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    i need connect  bluetooth or wireless headphone to my apple tv and what can i do with Optical Audio

    ATV does not asupport bluetooth for audio or any type of wireless headsets.
    If you want to connect the ATV to a receiver, connect it either via HDMI or Optical Audio.

Maybe you are looking for

  • VC No. of rows in Table disabled

    I cannot select "no. of rows" in a table, so always all rows are displayed at one page. What can I do to enable this function?

  • Change Object Server in SLD after system copy and SLD move?

    Hello, we did the following: - we migrated the SLD to the production system in our landscape - we copied the NWDI to a new system - the old object server was named sapsrv88 (object server attribute in the SLD) which was the hostname of the old SLD se

  • I am new to Mac. What do I need in the world of mac to produce graphic elements ?

    Hi, I am new to the world of MAC and I am wondering what graphics utilities I need to get, to be able to produce graphic elements like I was able to in my old pc, corel 10 suite. (it was a photoshop with draw with animated 3d vector capabilities too.

  • Mail received signal delayed

    For the past few weeks the alert window shows mail as been received and the mail icon shows the number of mail unread as expected. However, the chime used to sound at them moment that mail arrived, but now the chime doesn't sound for 30-45 seconds af

  • Exactly how to run sample Applets

    First, let me say exactly what I have done: I unzipped the Solaris version of the Java Card Development Kit on my machine. I then downloaded and unzipped the walletdemo. I opened two terminals and in one typed: jcwde -p 9025 jcwde.app and got the app