Simultaneous user Calls using 7985 Video Phone

I just want to know that, how many user makes call/Confernce simultaneously by using 7985 video phone.
If 7985 video phone allow multiple video calls at time then what is the procedure to enable multiple calls.

Thanks for the above information, I had the same problem, my Customers wanted to have three way (Multi point) video conference on 7985 Phones. By using MCU I should be able to establish three way (Multi Point) video conference over 7985 Phone. So this means three people (Phones) would be able to see each others.
Thanks

Similar Messages

  • HOW TO USE A VIDEO PHONE WITH MY LAPTOB THETHERING MY BLACKBERRY

    Hello every one I have a curve from Verizon I use this phone as theder with my laptopworks perfectly but what I try to due is connect to my laptop a video phone from ACN wish works with internet connecting to a ether net portFor some reason my phone won’t work if I use my blackberry The phone will work if I use my wireless card just normaldos any one now what I need to due to bridge or how to connect this so I can use my video phone thru my laptop thedering with my black berry Thanksalejandro
    Solved!
    Go to Solution.

    Sorry Godov but I cant help.
    shajilal, if youre using VZWireless then you would need VZ Access Manager to tether your BB.  You also have to make sure that the tethering feature is turned on (paid for).

  • Call Manager, Tandberg Video Phone bandwidth

    We have recently rolled out a Tnadberg Video Phone.
    Is the Tandberg phone considered an endpoint in call manager?
    Can you adjust what bandwidth the phone uses from within call manager?

    Locations in Cisco Unified CallManager Administration specify how much audio and video bandwidth is allowed for all calls in a specific location.

  • 7985 Video Phone Logo Background Replacement

    I need to place or replace select different our Company's Logo with the initial Cisco Logo to the Video Phone 7985, anyone to help me to know the Screen Size of 7985 and the corresponding Script.

    Hi, I found no docs on it, however a sniffing session unveiled the secret.
    Just follow the instructions for customizing the 7975 background and change the size from 320x216 to 800x600 (everywhere, size of the image, name of the directory, etc).
    I also created the thumbnail image but it seems not to be used by the 7985.
    Here's the 7975 instructions for reference :
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7975g/6_0/english/administration/guide/7975cst.html#wp1088046
    HTH
    Alberto

  • Call using a forwarded phone number

    I have forwarded my personal cellphone number to my office iphone number. Can I use iphone for outgoing calls using my personal cell number account without changing sim card?

    Hello,
    This may or may not be related to your issue but you can check it out.
    http://www.cisco.com/en/US/customer/tech/tk1077/technologies_tech_note09186a0080094c33.shtml#voipcalls
    Thanks,
    Scott

  • Video telephony using soft video phone help

    Can anyone suggest a soft video phone application that will work with a release of CCM and if you have a configuration/design guide for such an implementation it would be much appreciated.
    Many Thanks.

    The only thing I can think of is Microsoft's NetMeeting. YOu can configure that as a standard H.323 end point. VT Advantage doesn't work yet with IP Communicator but I have a feeling it will soon
    Hope this helps.
    Please remember to rate all replies

  • Suggestion: Direct Video Call using 3G network.

    I found there is not Direct Video Call option in any Android version by default Like it is in iPhone and Symbian phones, we can do a Video Call directly using the 3G network by dialing the number like we dial it for a normal call. Samsung and some HTC phones have implemented this in their andriod phones. I want to suggest please implement this Video calling feature in Sony Xperia phones. Note: I am not talking about Video call using any Video Calling App like skype or hangout or tango etc. I am talking about direct 3G network Video Call by dialing the number. So better people avoid replying to the post with useless replies

    You might be right at your place, many people may not need it because there are many free video calling apps in google play. But if you believe me, there are still some people here in our region, they do not know how to use google play or a google ID, and if they do not know what is google play how they will download an app for a video call.many people are backword here, some of them even do not know how to use these video call APPS. The purpose of my this suggestion is for those people who are not able to download and who are not able to use these video callings apps. if this features enables, they can just make a video call like a normal call only network data charges apply and that is it. I have also requested the same feature to android.

  • Skype Supported desktop video phones

    I now have two obselete skype desktop video phones and need a recommendation for one that's easy to use for my 80 year-old parents.  Thanks

    Honestly speaking - there's no way to recommend you one unless I know the exact environment you're placing it in.
    Google 'Skype video phone' and you'll get a whole list, pick the one that looks like it suits you best, they all do the same thing!
    The one on the Skype website is this one.
    Although really, we're in the 21st century now - what's your budget? You'd be better off getting them an iPad or smart device - they're simple enough to operate and they do far more besides just skype video calls than a video phone can ever do.
    Anthony
    This post was by Anthony- I do not work for Microsoft!
    If this solved your issue - Mark it as a solution! If you like my post - Please add Kudos!
    Spotify Community Profile - Anthony
    Feel free to PM me - Here

  • Is i phone 4 video call that you said a face time can only be use for video calling i phone product only

    hi, i just want to ask you about your produce i phone 4 for the said face time or vedio calling. can it be used only for same i phone product or all the mobile in the world like nokia and blackberry

    ronrico wrote:
    as if you are mis leading the consumer......
    You aren't addressing Apple here. This is a user-to-user tech support site.  Apple doesn't participate here. We are all iPhone users like yourself
    There is nothing whatsoever misleading about how FactTime is described by Apple.  It works EXACTY as stated. If you are mislead, it's due to your inadequate reading comprehension or lack of effort reading what Apple actually said.
    There is no "international" standard for cell phone video calling.  Most other phones use proprietary systems or 3rd party apps such as Skype (which also works on iPhones).  FaceTime is on WiFi internet connections only because all carriers have refused to allow it on their cell networks due to the huge number of iPhones.  The FaceTime standard is open source and other manufacturers are free to implement it, but have refused so far.

  • I got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i c

    i got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion
    but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
    any ideas ?

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • Video Phone only works when specific user initiates connection

    Hi,
    I have an application based on the Cirrus Video phone demo as presented here:
    http://labs.adobe.com/technologies/cirrus/samples/
    In general, this works fine, but for one specific user with whom I test, I have the following issue:
    When I initate the call, we are paired together by Cirrus, but his video/audio does not transmit to me. He can however see and hear me just fine.
    When he initaites the call, everything works fine.
    I'm concerned that this is an issue re. NAT/Firewall setup on standard home broadband connections, in that UDP is allowed through his firewall when the firewall sees that the connection has been initiated by him.
    I'm a web developer, rather than a Flash developer, and I'm just looking for a few leads so that I can investigate this.
    G

    My application works as follows:
    User1 (me) askes User2 (friend) if they would like to speak via AJAX text chat system
    When User2 confirms that they would like to do this:
    User1 browser loads Flash app
    Flash app connects and obtains session key from cirrus
    Flash app writes that session key to database
    User2 browser loads Flash app
    Flash app checks DB to see if session key exists
    If not, it waits, and check again in 10 secs
    When session key is finally found, Flash app connects to cirrus
    Cirrus now exchanges network data between clients, and P2P connection is established
    Call is placed from User2 to User1
    User1 answers
    Video and audio transmission starts from User1, and is received by User2
    No Video and audio transmission is received by User1 from User2 (text chat over Cirrus is however possible)
    All of this works in the majority of cases with other users, and when the roles are reversed, it also works.
    The only time it doesn't work, it when I try to call my friend.
    The behaviour described above can be seen in both my app, and the sample provided by Adobe at:
    http://labs.adobe.com/technologies/cirrus/samples/
    I hear what you are saying about RTMFP, but it really doesn't look like a coding problem, unless that problem also exists in the Adobe demo.

  • Harassment phone calls using Skype function (i.e. ...

    Note: I have sent an e-mail to the Support Team. Pending reply.
    Based on call history, my home and mobile numbers have been bombarded by phone calls (using Skype) from Skype user, who resides in another country.
    For example
    Time: 02:20 till 22:33
    30-Aug-2012, home number received 15 calls and mobile number received 27.
    Time: 00:00 till 22:20
    31-Aug-2012, home number received 44 calls and mobile number received 90.
    Time: 11:46 till 23:54
    01-Sep-2012, home number received 04 calls and mobile number received 33.
    Note: The harassment calls started since Oct-2010. I had discovered these harassment calls were made by this Skype user. I am able to provide call history made by this Skype user from Mar-2012 till Sep-2012.
    This is a serious violation of the Skype's Terms of Service. Please investigate and take appropriate actions against this issue. Your quick response is very much appreciated. Thank you.

    I have a similar problem. I recently reinstated Skype on my iPad. I am able to sign in, to check my profile page and to check on my credit (I have about $30 US on it). But, I am unable to bring up a dial pad, nor a phone logo. I should add, I do have another copy of Skype on my iPad, under a different spelling of my name, that works perfectly well. I want to be able to contact to Skype using the re-instated account (which I had created earlier in error) so as to use up the existing credit, as I've learned that I can't combine the two accounts. What can I do? Can anything be done?

  • No sound on Skype video call using Xbox One

    No sound on Skype video or audio call using Xbox One. The Wireless headset works but cannot route audio to Kinect only. I tried assigning the headset to another user but still nothing. Thoughts?

    Hi Derek,
    I'm having the same issue on the Xbox One too - no audio when connecting to contacts and contacts cannot hear me either (they can see me) when using the Xbox One app.  This is not an issue on other Skype platforms.
    In addition, when dialing the Skype test number on the Xbox One, I get the dialling tone when calling, but once the the call connects there is also no audio from the recorded message (usually a British lady).
    The Skype app worked before the recent Xbox One firmware update and the same issue occurs on different TVs.  It also does not work when headsets are being used.
    I have deleted and redownloaded the app.  In addition I've unlinked and linked my Microsoft account to my Skype and still no success.
    Any suggestions? Thanks.

  • Does FaceTime audio call use the Apple ID instead of email address or phone number?

    My wife and I each have our own iphones.  The Facetime audio calls come through OK for each one of us, as the calls are set to be received on each of our own email address and phone numbers (so there is no issue here).  But when Facetime audio calls come through, both phones ring at the same time.  I am guessing the FT audio calls (unlike the video calls) are using the Apple ID which is the same for both our phones.  Is this the case?  And if so, is the only fix, to set the phones on different ID's?  Why are audio and video calls set up differently?

    It depends upon the device that they are on - from http://support.apple.com/kb/HT4319
    To call someone using FaceTime, you need their phone number or email address. Which one you use is determined by the device you are calling:
    When calling someone using an iPhone 4 or later: Try the phone number of the person you are calling first. If the person has registered an email with FaceTime, you can use that as well.
    When calling someone using an iPad 2, iPod touch, or FaceTime for Mac: Use the email address designated for FaceTime of the person you are calling.
    On iPad 2, iPod touch, and FaceTime for Mac, you need to add a person as a contact using the FaceTime or Contacts app before you can call them.

  • I have this problem as well. The screen is black . i can.t get it to respond.Power   home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

    The screen is black . i can.t get it to  respond.Power + home soft reset didnt work. Itunes could detect any sync  apps. I used my home phone to call my iphone and on my home phone i can  hear the calling tone.But my iphone didn't ring/screen did not light  up. Its a iphone 4. Any ideas how to fix this?

    If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

Maybe you are looking for

  • Issue w.r.t  custom implementation of iterator

    We are facing some issue w.r.t valuechange events of some tags like inputfile,selectbooleancheckbox... In our application, We have used a panel tabbed component, the left side has a tree which has some link nodes and on the right we have tabs opened

  • Vertical Green Lines

    I am having a VERY annoying problem in final cut. All of my footage now has green vertical lines running through it. Here is a picture of what it looks like: http://www.flickr.com/photos/36458218@N08/4731527252/ When I open the source footage from th

  • Query regarding inserting a new row at first row data table

    hi all, I have a doubt regarding the insertion of new row in data table.I am now using the following code if (skillDataProvider.canAppendRow()){ RowKey rowkey = skillDataProvider.appendRow(); skillDataProvider.setCursorRow(rowkey); String skillID=get

  • Input tax calculation

    Hi guru Tax structure for the catering services shall be Service [email protected]% for 50% of the order value and [email protected]% on 60% of the order value. The illustration is as follows.      Qty      Value     Amount      620     14     8680  

  • How to find Site Name from SCCM Console or Client

    I'm New to SCCM, 01. How to get the Site Name information from either SCCM CLients or SCCM COnsole? Note: I got the Site Code from COnsole 02. Any Basic/Fundamental Link or Documents about Software Update in SCCM (what are the diff type of Patches, w