Since 20.0 download, Well, this is embarassing (windows & tabs) comes up every time. I tried reset-didn't work. What now?

Since the 20.0 download, every time Firefox opens with" Well, this is embarassing" (having trouble recoverings windows and tabs) then lists windows and tabs for each site I have been on. I choose one - hit restore - and then I can open my home page. I went to Support and tried Reset, retstarted and opened Firefox but the same window appeared again. This time Windows and Mozilla support were on the list. What can I do next? I have no idea how to fix this. I have a MacBook Pro.

OK Mozilla, fix this problem If I wanted to have to go into programming I would have taken diferent classes in college.
If I have to start changing things to fix your problems you created in Version 20.0, then I am done with Firefox, Hello Chrome.

Similar Messages

Am gettinI g an error message of apple sync notifer that the entry point sqlite3_3_checkpoint could not be located in the dynamic link library SQLite2.dll/ This message comes up every time I re boot.

getting error message when I boot up of the apple sync notifer that the entry point sqlite3_3 checkpoint could not be located in the dynamic link library SQlite2,dll this message comes up every time I login and I dont know what it means or how to fix and stop the message appearing every time I log in. what does this mean and how do I fic this issue

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

I have "well this is embarassing" and then nothing - frozen and nothing works

all I get is the "well this is embarassing . . . " message and a rotating circle comes up where my mouse should be pointing - no Firefox bar across the top - just this damed circle

A possible cause is that you are first closing all Firefox windows and then close the Firefox application.
Some have reported that closing Firefox (Firefox > Quit) while the browser window is still open works for them.
*Bug 845681 - Closing all windows and quitting Firefox afterwards leads to about:sessionrestore to be shown on next startup
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

Since upgrading to iOS 8 , my Apple TV second gen stops playback every time my iPhone rings. Anyone else have this happen?

Since upgrading to iOS 8 , my Apple TV second gen stops playback every time my iPhone rings. Anyone else have this happen?

This is happening to me too. Couldn't figure out what was happening at first then I got a phone call and the ring came through the appletv. Playback was stopping when I would open a game or something else as well.
I'm on a 5s with ios 8 and have an appletv 3rd Gen(it is updated too). II often airplay movies from my NAS through my iPad min and that stops when something happens on my phone even though airplay on my phone is off.

Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

This is not just annoying, it is wrong, because at the end of the trial it will stop completely. You must resolve it before then.
So, did you do anything to license the trial version? It needs to be told that you have purchased, or it will stop working at the end of the trial.

The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

The last update failed on
my window 7 home prermium pc, resulting in me having to try it manually download and install,
this also failed leaving my I tunes not working, I tried restore back to a
safer date, but every time it tried to update it failed. eventually it told me
to delete and reinstall, this fails due to the apple mobile device service
failing to start, and asking me if I have sufficient privileges to start system
service, I have tried all suggestions on iTunes page, ie delete everything to
do with apple, and start as administrator, nothing works, help please

I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

CAnnot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

Cannot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

start the installation of design premium cs5.5 just to make sure you're using the correct serial number. once your serial number is accepted you'll see a screen giving you the option to install none, some or all of the cs5.5 programs. at that point you can quit and not install anything having verified your cs5.5 serial number if you want nothing cs5.5 on your computer.
on the other hand, if your cs5.5 serial number is not accepted, you'll pinpoint the problem.
or, if your cs5.5 number is accepted, you could install a cs5.5 program and then install cs6. it should recognize you have a cs5.5 program installed and NOT prompt you for you cs5.5 serial number allowing you to continue with your cs6 installation.

HT4407 I have already installed Window-7 in my Mac (64 bit). When I downloaded window support software I every time saw network error option on my screen. But network working very well and I can brows webpage. Will someone suggest me support for OSx Lion

I have already installed Window-7 in my Mac (64 bit). When I downloaded window support software I every time saw network error option on my screen. But network working very well and I can brows webpage. Will someone suggest me support for OSx Lion .

If I remember right there "may" be a problem if you have a proxie settings enabled.
System Preferences/ Network/ Advanced/ Proxies. Can't remember which one or if it was an issue in 10.7 or 10.6. Just make sure their all unchecked and try again.
You might try a search in these forums for more information. Different fix's for different issue's.
Sorry I can't help more.........

Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

Try downloading and installing 6.0.2 from here:
http://www.oldversion.com/macintosh/download-Firefox-6.0.2.html
In Firefox preferences/advanced/update uncheck download and automatically install updates. Instead check ask me what to do.

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

I keep getting "camera not detected" every time I tried to download photos from my Powershot SD1000?

I keep getting "camera not detected" every time I tried to download photos from my Powershot SD1000? I tried different USB cables and still didn't work,

Hi garyliban!
Please ensure that your camera's software is up to date. The older versions that came with your camera were out long before Windows 8, so they need to be updated to be able to work with Windows 8. Please click here to go to the download page.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.
And this is the error that comes out:
szAppName : AppleMobileDeviceService.exe szAppVer : 17.88.0.7
szModName : kernel32.dll szModVer : 5.1.2600.5781 offset : 00012afb

http://www.youtube.com/watch?v=be09gGFw-Y4

I just got the new 5s and when i downloaded my contacts from iCloud a lot of them are missing!!!! i tired to make a new backup from my old iphone but it didn´t worked, what can i do to get all my contacts

i just got the new 5s and when i downloaded my contacts from iCloud a lot of them were missing!!!! i tired to make a new backup from my old iphone but it didn´t worked, what can i do to get all my contacts?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Since 20.0 download, Well, this is embarassing (windows & tabs) comes up every time. I tried reset-didn't work. What now?

Similar Messages

Maybe you are looking for