Since 30 October 2012, Mozilla has blocked users from running YouTube on Firefox 3.6.28 running on Mac OS X 10.5.8

The last Flash player plug-in that can run on G4 ppc computers is 10.1.102.64. On Oct 30 2012 Mozilla blocked _all_ versions of Flash below version 10.3.183.19 from running on _all_ versions of Firefox. Can this block not be lifted from ppc versions of Firefox (below 3.6.28)?

P.S. If the above doesn't work, even after restarting Firefox:
You could try disabling the blocklist, which isn't normally recommended since it will remove ALL blocks, many of which are in place for security reasons. If you want to do this,
'''FIRST: '''Change the '''extensions.blocklist.enabled''' preference to '''false''' in about:config
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# (If necessary) Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Double-click on '''extensions.blocklist.enabled''' in the list of preferences to change its value to '''false'''.
'''NEXT:''' Quit Firefox, then open the [[Profiles|Firefox profile folder]] and remove the file '''blocklist.xml'''
Ref: https://bugzilla.mozilla.org/show_bug.cgi?id=754723#c50

Similar Messages

This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625

This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625
If you get a message saying, “Publisher: Not trusted,” the printing functionality you are attempting to use may become blocked while downloading, installing or attempting to run.
You may also see messages such as:
MSIExec installation error (Return code:1625)
The recommended software listed below could not be installed
“Do you want to allow the following the program from an unknown publisher to make changes to this program”
“This program has been blocked for your protection”
“Blocked”
“Not trusted”
The Windows User Account Control message may look like this.
You may get this message when installing, uninstalling, or updating HP software for Windows from the product CD, from software previously downloaded from www.hp.com, or from running HP Smart Install by connecting a printer via USB cable.
The solution will vary depending on the products that you are using. Here is a helpful document for HP printers that will walk you through what you can do.
John
I work on behalf of HP.

Hey @kat54 ,
Welcome to the HP Forums!
I understand you're receiving an error stating "This program has been blocked for your protection."
You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
Make sure the utility you've downloaded is for your exact product and operating system.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

How to Block user from Sending IM or Hide Presence of there user who is not in his department

Hi All,
How to Block user from Sending IM or Hide Presence of there user who is not in his department.
Thank you

Hi Jp,
Method 1:
You can use the Enhanced Privacy Mode in Lync 2013
<section class="ocpSection">
Enable Privacy Mode
By default, everyone except Blocked Contacts can see your presence status. To modify the privacy settings, you can do the following:
In the Lync main window, click the Options button.
In the Lync - Options dialog box, click Status, and then do one of the following:
Click I want everyone to be able to see my presence regardless of system settings (override default settings).
Click I want the system administrator to decide - currently everyone can see my presence but this could change in the future.
</section>
About Enhanced Privacy Mode
If your organization has enabled Enhanced Privacy Mode in Lync, you can choose whether to limit visibility of your presence information to only those people you’ve added to your Contacts list. You do that by selecting one of the following on the
Options->Status window:
I want everyone to be able to see my presence
I only want people in my Contacts list to see my presence
Method 2:
Using Privacy Relationship, you can block a particular user by adding him to blocked contacts
Anil Kumar (MCITP)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Block users from downloading from internet

I'm curious as to what everyone is using to block users from downloading certain file types (.exe, msi, zip, bat, etc) from the internet? We had websense, now barracuda for a web filter but have major issues with filtering downloads from the internet. The main issues is filtering SSL sites.

Hello,
The WSA has a feature called Object Filtering which allows admin's to configure access policy parameters to block certain file types from being downloaded through the WSA. To apply the same settings to HTTPS requests the WSA would need to decrypt the request.
I Hope this helps.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091

Blocking users from syncing calendars and contacts from itunes

Is there a way to block users from syncing the corporate GAL and their Outlook calendars from their company computer?

Thanks for the answer Simon. That seems simple enough but there are some things which aren't clear.
If I create accounts on the server for the users independently (ie not ownership of the home folder) they're going to have different UID's. Surely this means that even with the same account name and password, they're going to be treated as unique users. Does that not affect who has write access? I don't know how the Calendar and Contact servers work so this may be irrelevant.
How do you "have the server host their calendar and contact details"? Copying the files for the existing local users to the new users on the server will leave them with invalid permissions.
I have read that using the Calendar and Contact components of Server.app is not a supported way of syncing across machines and that they're intended to be used for shared information rather than syncing. But maybe there is no way to avoid an "unsupported method" without moving the home folder. Is this a method you're using?
I'll do a bit of testing with this but would also be grateful for any additional hints.

Block user from copying media files

how to block user from saving certain files like Avi,mP3 , ... to their computers by GPO ?
it is possible?

I do not think that you can go that by GPOs. However, this is feasible on File servers: http://www.petri.co.il/forums/showthread.php?t=45225
You might think about creating scheduled tasks that will run periodically and remove files with these extensions from the user profiles (...).
For GPO questions, please consider asking them here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP&filter=alltypes&sort=lastpostdesc
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

IM34, IMCCP1, IMCCP3 . How to block user not run these tcodes twice

Hi All,
I have plan value from cjr2 (cost element and activity type)
Normally we use IM34 (to roll up) the plan value then to copy plan value to investment management (imccp1) and copy plan to project budget (imccp3).
How to block user to run these tcodes twice. It seems that if user run it twice, the total plan and budget will be double. Is there any way to reverse?
PLz help...
Cheers,
Nies

thx

How can l block users from backing dating transactions

1. How can l block users from back dating transactions in SAP B1. It was discovered that, in production dept there is this allowance given to them to keep producing for the previous month in the new month; this according to line staff is to enable them meet up their monthly target, after a meeting with the management it was resolved to block that right of backdation of enteries. how can l correct this.
2. How can l change the decimal places backward in the general settings of administration of SAP B1( iniatially it was set to be 5 under Quantity now want to correct it to 3 how do l go about this).
Joel

Joel,
By forum rule, one question for one thread. I will answer you the second: If you are using 2007 version, the option to decrease decimal place is not available. Check this thread to know more:
Re: REDUCE NUMBER OF DECIMAL PLACES
Also note: this forum is just for B1 system administration. Please post it on the main forum.
Thanks,
Gordon

Block users from dba access

Hi all,
I am currently using a oracle 10.2.0.1.0. when i create user i want to block user from dba access how can i do that

connect test/test as sysdba;The problem isn't here with user/password, see below :
SQL> conn userdoesntexist/fake as sysdba
Connected.
SQL> show user
USER is "SYS"
SQL> conn / as sysdba
Connected.
SQL> show user
USER is "SYS"
SQL>As it already said above, the problem is with the usage of password file on the server connection. Try to disable this one.
Nicolas.

My antivirus(macfee) has blocked me from using firefox browser. how do i unlock it?

my antivirus(macfee) has blocked me from using firefox browser. how do i unlock it?

Several tried to but no one seemed to understand the real problem.
I COULD, because it was mine too. So it follows the only ultimate solution:
1. Open Firefox
2. On the address bar, type – about:config in the URL. Press Enter.
3. You will be warned about Warranty. Click on “I’ll be careful…”
4. On the Filter dialog box type – search.conduit
5. It will display all related entries. Right-click on Preferences Name and Reset.
It worked for me, after trying a dozen of "fake" solutions. ;)

Block users from retrieving during manual calculation

Hi Everyone,
I am wondering if anyone knows how to block users from retrieving or pulling in Essbase while a calculation is running manually in EAS. We have a currency conversion calculation that manipulates the data for several minutes. Users who pull the data see erroneous data for some time and it becomes an issue.
Thanks,
Mark

You would have to log them out, then disable connects while you run your script. You could execute maxl commands from EAS.

Blocking Users from Commenting

Is there a way to block users from posting comments on a blog? We have generic accounts for a labs and our students have figured out that they can login using the generic account and post a comment. Then another user can login sing the same generic account and read the comment even if it is not been moderated. They are using it like a chat system.
Simply put can we create a "blacklist" of users for the service which would prevent the students from posting as a user. They would still post as anonymous users.

Hi Vittal,
use the user-exit described in note: 808971 (RSWUWFML2).
If you had several users changing dynamically I would create a z_ table for those users and select all in the exit.
The other way would be to allocate to the users a dummy email adress...but this is surely not so great.
Regards
Tibor

How to prevent users from running PRC: Transaction Import from WebADI form?

Hi,
We are 12.1.3 and trying to create a workflow to approve Project transactions coming through web ADI before they become effective. To this end, we want to prevent users from running the PRC: Transaction Import from the Web ADI.
I know that if the checkbox Automatically run transaction import is not checked, the program does not run. But we want to hide this checkbox and not allow the possibility that the program could get triggered.
To this end, we updated the BNE_INTEGRATORS_B with source='C'. This allows you to edit the integrator from Desktop Integration Manager.
UPDATE BNE_INTEGRATORS_B SET SOURCE ='C' WHERE INTEGRATOR_CODE ='PAXTTRXB'
In the 4th step, where the value for Uploader Parameters is set, we have set boolean value to No. These are the fields on the page:
Parameter Name: bne:import
Display Name: Start Transaction Upload
Data Type: Boolean
Category: Field
Default Value: Boolean Flag: No
Description: start Transaction Import Concurrent Request
Display Options: Displayed: Unchecked
Display Options: Enabled: Checked
Display Options: Required: Checked
Prompt Left: Automatically submit Transaction import
Display Type: Check Box
Maximun Size: 100
Display Size:100
Now the checkbox is not appearing for the user to check it, But the program is automatically running when you hit Upload in the WebADI.

Hi ,
Try removing the PRC: Transaction Import Program from the request group for the responsibility used by customers to submit the WebADI and then check if the program launches.
Regards,
Raghavan

Policy to prohibit users from running unsigned code?

Is there a policy setting to prohibit users from running unsigned code? There are policies that restrict the installation of code,
http://technet.microsoft.com/en-us/library/bb457006.aspx
What I need is to prohibit the running of unsigned code even for users with adminstrator rights. If needed, we can use our code signing certificate to sign code.

Here's a link with some additional information:
http://gpsearch.azurewebsites.net/#4954
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Blocking User from accessing wrong customer code in VA01

Hi SAP SD GURU,
my finance user uses rebate recipent in sales order creation for rebate settlement.
my operation user uses one-time customer code in sales order for sales.
Both type of customer codes can be used in sales order creation under different order type.
The problem arises when operation staff uses rebate recipent code to create sales order and then billing.
My finance User want this to stop.
How can I block the operation User from continuing the sales entry when they select the rebate recipent in a sales order entry?
Is there any available setting in the customer master that allow me to do so?
Is there any setting in the SPRO that can control this?

Hi Colin,
Well you need to control these through the user profile & roles
you can do this in SU01 which a Basis person can help you out with .....
now as said User X wants authorisation to va01 ( Rebate)
User Y wants Authorisation to va01 ( One time)
since here we are not restricting any user for VA01 auth , the Basis person can define the role only till the transaction level not beyond that in standard SAP transaction and here you want to restrict user to not use different customer code
as per my knowledge i dont think that is possible but still have a check with the Basis team
Hope this helps
Cheers

Since 30 October 2012, Mozilla has blocked users from running YouTube on Firefox 3.6.28 running on Mac OS X 10.5.8

Similar Messages

Maybe you are looking for