Since 5.1.1 problems with 3g

since i actualized my ios to 5.1.1 version my 3g comunication is not working.  What can I do to fix it?

What "connectivity" issues are you facing after updating to 5.1?
As far as re-installing to iOS 5.0 or downgrading is concerned, "The Huntress" has given the answer.

Similar Messages

  • A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

    a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
    ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not  a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and  1TB IOMEGA
    any one have a solution? anyone dealt with this problem in the apple care program?

    You are still under warranty and/or have AppleCare.  Call them.  Let them deal w/it.

  • Since installing Yosemite, I problems with email, Apple TV, FacetTime.  Any ideas?

    Some time ago, I selected my iCloud ID as "AnyName"@me.com.  Then, Apple changed the @me.com to @mac.com but allowed us to keep the original @me.com ID.  This may have created a problem with Yosemite, and I suspect that problem is located somewhere within my WiFi network.  Apple TV is frozen, I receive many notices every day that my iCloud settings need to be adjusted, another email address has appeared in my email InBox (OutBox, Sent, etc too).  Any ideas what I should be doing.  I see a recent post concerning WiFi settings from another reader as well.

    You might be able to find a driver here.
    Gimp - Print
    HPIJS for Mac OS X

  • Since gnome 3.2 problems with screen updates

    Hi!
    Since the upgrade to gnome 3.2 I have a very weird problem that the screen doesn't get redrawn.
    For example, after login into gnome-shell starting terminator, as soon as I start typing something
    the cursor stops blinking and no characters apear. My workaround is to switch to any tty and back to Xorg.
    After that the characters are there. this is somewhat anoying and seems to get worse in the last week.
    It also seems to happen a lot if I have to input a password e.g. gksudo or wlan password.
    I have a hp probook 5320m with intel i915 driver, I'm not sure if the gnome shell triggers some intel bug
    or gnome shell is doing something wrong here.
    Anyone else has similar issues?
    With gnome 3.0 I had no problems.

    In the meantime I found the following:
    - When I suspend with the power button, the screen is locked, but not when I use the status menu option
    - This seems to be related to the screen setting 'Lock screen after'. I had it set to 1 minutes. When I change it to 'after the screen goes blank' the
      problem doesn't seem to occur.
    So, the way it looks now, it uses the same settings for delaying the locking the screen after the screensaver kicks in when locking the screen before suspend.
    Which doesn't make much sense. And then the behaviour is still inconsistent with the power button suspend.

  • Since update to NJ4, problem with audible, lock screen, and car charging.

    Since update to NJ4: I listen to audible a lot on my phone. Since the update, when I'm listening and the phone goes to lock screen, when I power up, my home screen background goes to a solid color and the phone screen jumps from audible to lock screen and I can't do anything but turn off the phone.  When I set security to none, no problem.  Seems only to be when phone goes to lock screen.  I also noticed I always used a third party car charger with no problem, now it says I need to use the original charger, it never did that before and I've had the phone for a year.  I did a factory reset and still have the problems, did not help. Any suggestions?

        nuqrat Software updates can change functions of the device as it is designed to help the phone operate better. It is common that the phone displays the message about the original charger be connected. Some charges can drain the battery life or not charge the phone properly if they are not from VZW or the manufactuer. As for the the issues with the screen and lock settings, we recommend testing the device while it is in Safe mode. http://vz.to/SsJCZp  Please keep us posted.
    SheritaH_VZW
    Follow us on Twitter
    @VZWSupport

  • Upgraded iTunes last week since then having big problems with runtime library, uninstall iTunes, tried to reinstall still same problem with runtime library. Any suggestion?

    Last week I upgraded iTunes, since then it did not work. Was getting message
    Runtime error program C:\Program files(x86)\iTunes\iTunes.exe
    R6034
    An application has made an attemps to load C runtime library incorrectly. Please contact application's support team for more information.
    Other message i get is window error 1114 - error 7
    \or Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services
    Can anyone help?
    Thanks

    Hi there  - I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
    1) iTunes
    2) Apple Software Update
    3) Apple Mobile Device Support
    4) Bonjour
    5) Apple Application Support
    Then you restart your computer.
    Then you install the latest version of iTunes (which will reinstall all those things you uninstalled).
    Then you restart your computer again.
    Mine is working perfectly again now.
    I hope it works for you,
    Carmen.

  • Since upgrading to Mavericks - Problems with PowerPoint Print View

    Since I upgraded to Mavericks recently, my Print View in PowerPoint 2011 has changed.  Prior to Mavericks I was able to see the full slide in print view.  Now when I preview a slide, the right hand side of the slide is cut off (about half inch).  Is there any thing I can do to fix it? Any advice will be most appreciated.

    The driver should be part of OS X, not something you download.
    This link shows supported HP printers (6800 but no 6840).
    http://support.apple.com/kb/HT3669#HP
    I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
    Barry

  • HT201210 Since latest update had problems with losing network

    Updated my phone on Wednesday and since then keep losing network reset phone comes back for a bit then goes again help

    Have you tried resetting network settings at Settings > General > Reset?
    This will also erase all saved wi-fi networks and settings.

  • Problem with getAttribute() for Booleans

    Hi
    We have an Application which has undergone all the migration path from JDeveloper 9i beta up to JDeveloper 9.0.5.2 (in several steps certainly :-) ) . Now we try do the next step: we want to upgrade from 9.0.5.2 to 10.1.3.
    But there is a problem with Boolean attributes:
    Since there were some problems with Booleans in elder versions of JDeveloper all our Booleans are stored in Attributes of type VARCHAR2(1) ("1" is TRUE, "0" is FALSE). This worked well since 9.0.5.2. But now in JDeveloper 10.1.3 all Boolean Attributes return FALSE, no matter of the content of the database. Since we do not want to convert our data in the database I am now looking for a way, how I can enable this Application to correctly read Booleans from VARCHAR2(1) .
    I've already found some classes like "TypeFactory" and "TypeMapEntries", and I've found the Property "jbo.TypeMapEntries". But I've found no clue, how to use them for my problem.
    Can anyone give me a hint?
    Thanks in advance
    Frank Brandstetter

    You have several problems:
    1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
    2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
    All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
    Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

  • Problems with Mail after upgrading to MAC OS10 version 10.6.8

    I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard.  Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
    'You can't use this version of Mail with this version of Mac OS X.  You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
    Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

    You should consider downloading the 10.6.8 combo updater and applying it again.
    http://support.apple.com/kb/DL1399
    Pondini has a great page about upgrading.
    http://pondini.org/OSX/Combo.html

  • HT4623 cant restore phone, whats the problem with it ?

    My iphone 4s recently updated softwaer to 6.1.3 and since done that had problems with it. I couldnt del apps etc of screen. It also tried restore again when connect to comp and never finalises and get error coes (3014) and (-1). tried restore few times and unsuccessful with it. the provider was no help at all and the carrie said get it sorted with the provider who wont entertainit ???

    Error 1 or -1 indicates a serious hardware failure.
    Error 3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

  • IMovie-Problem with hangups.

    I just upgraded to IMovie 11 from IMovie 8. I only have about three short projects (15 min each) and one longer one (5 1/2 hours worth of clips) in IMovie, so it shouldn't be too slow. I had no problems with hangups working on 8, but immediately had problems with 11 after upgrading.
    Whenever I try and play a clip by pressing the space bar, I get the "spinning ball of death" for about 10-15 seconds. EVERY time I move the cursor and push it to play I get the same thing. Not very time efficient.
    I repaired permissions, restarted, and moved any large desktop files to external drives, but it doesn't help. I don't have whole lot of clutter anyway, most of it is on externals.
    I have an IMac 2GB 800MHz with all the new updates. I would think it may be a lack of memory, but it may be a bug or something, since I had no problems with 8?
    Would it help to dump any movie clips from IPhoto? Does that affect IMovie?
    Thanks in advance!

    Wow, i did not realize that the problem has been reported before. The tech support supervisor talked and acted like he'd never heard of this before. I guess they should monitor their own forums! I love the iMovie software when it works. I don't know of any PC products that are so intuitive and easy. Unfortunately, I, too have been very disappointed by this expereience, especially since I have been complaining for 12 years about every PC I ever owned and have been arguing with all my PC user friends about how wonderful Apple is. After reading the previous thread about this problem, I have to seriously think about returning my Mac for a refund and cut my losses.

  • Activation problem with Photoshop CS (bought in 2003)

    I'm using Photoshop CS (bought in 2003) and Windows 7. Since there was some problem with Windows, it has performed a recovery process. After the recovery, Photoshop requires me to activate the software thru internet which is not working. Please help. Thankyou!

    The activation servers for versions CS2 and earlier have been permanently taken offline. You cannot activate these products.
    In exchange Adobe has supplied a non-activation version of CS2 for legitimate owners of those products. See the the link below. Download the appropriate application. Use the key supplied on the web page, and follow all other instructions.
    CS2 and prior
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    --OB

  • Persistent problem with 6500 Classic

    Hello.
    First I want to apologize if this is the wrong place for my problem.
    I buyed my Nokia in the end of 2007. Since then I have problem with my earpiece and ringer. From time to time when listening music in the begining of the song the sound becomes really bad, nothing can be understand. To fix the problem you have to change the song or stop it and play it again. The same thing happens and when you talk with somebody. When I dial somebody sometimes the sound becomes really bad and I can't understand him and he also can't understand me. I have to dial him again. The same thing happens when somebody dial me, but again not always. The mentioned problems occur on about every 10th song and call, sometime in less time, sometime after couple of days, a week.
     The phone go in repair. First time from the magazine said to me that there wasn't such a problem. The second and the third time they said to me that the problem is solved and earpiece and ringer are changed, but the problem continues. I get my Nokia from repair today. The problem continues. I don't know what to do.
    Please can somebody help me.

    I think this is done intentionally in case you are using one of the application. You don't want it to lock while you are using something.
    There is a shortcut to the standby screen though. While you are in one of the applications, you can press the red End Call button to close everything down and return you to the standby screen.
    Hope this helps.

  • Problems with Oracle 11g on Win2008 server

    Hi all,
    we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
    Since yesterday we have problems with the database. On monday we had no problems.
    The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
    here the tnsnames.ora:
    # TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
    # Generated by Oracle configuration tools.
    IFILE=M:\TNSNAMES\tnsnames.ora
    ORACLE.MEKRA.NET =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
    (CONNECT_DATA =
    (SID = qsys)
    Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
    Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.
    After 15 minutes diagnostics we stopped and started the db.
    The PCs got after the restart a connection.
    On the clients is the oracle client 10g installed, but I think thats not the problem.
    I don't know whats the problem can be.
    I hope you can help me or have some idea's?
    The TNSnames.ora on the server:
    # tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORALB1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = oralb1.mekra.net)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
    One of them we deleted.
    The dns should be not a problem now.
    an idea? I hope so....
    thanks for reading.
    bye

    852138 wrote:
    Hi all,
    we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
    Since yesterday we have problems with the database. On monday we had no problems.
    The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
    here the tnsnames.ora:
    # TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
    # Generated by Oracle configuration tools.
    IFILE=M:\TNSNAMES\tnsnames.ora
    ORACLE.MEKRA.NET =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
    (CONNECT_DATA =
    (SID = qsys)
    Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
    Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.There must be some clue .. a tns error message ...
    >
    After 15 minutes diagnostics we stopped and started the db.
    The PCs got after the restart a connection.
    On the clients is the oracle client 10g installed, but I think thats not the problem.
    I don't know whats the problem can be.
    I hope you can help me or have some idea's?
    The TNSnames.ora on the server:tnsnames is used only by client processes. When you say "on the server" are you talking about the one pointed to by the IFILE in the local tnsnames shown above? If not, if this just happens to be the tnsnames on the database server, then it has no bearing on your problem.
    # tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORALB1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = oralb1.mekra.net)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
    One of them we deleted.
    The dns should be not a problem now.
    an idea? I hope so....
    At a previous employer we used a shared tnsnames file. It was not on the db server but on a file server, specifically for shareing. Occasionally there would be an issue with the network connection to that file server, or our dimwit SA would change the sharing permissions. Of course he claimed there was no issue on his end and I had to take my own network traces to prove it was.
    thanks for reading.
    bye

Maybe you are looking for