Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

How do I clean up my new FIOS connection?
The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

Similar Messages

  • ASA supports NAT in bridge mode??

    any one know if an ASA supports NAT in bridge mode? especially the 5580 series x??

    Hi Hans,
    Yes it does, from version 8.0 and higher.
    Unsupported Features
    These features are not supported in transparent mode:
    NAT /PAT
    NAT is performed on the upstream router.
    Note: Starting with ASA/PIX 8.0(2), NAT/PAT is supported in the transparent firewall.
    Here is the document:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml#visits
    Mike

  • I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300

    I would like to be able to size images by kilobytes instead of pixels--is this possible?  I use I-Contact which requires a maximum of 70kb per image.  For best quality I want to make the images as close to 70 as possible.  Currently I choose a size of 300 pixels on the shortest side but sometimes this gives me an image of slightly greater than 70kb and sometimes the image is just 30-40kb.  Is there a way to be more precise in reaching but not exceeding 70 kb?

    That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
    You can opnly resize using the available options and file size is not one of them
    LN

  • HT2638 since updating iPhoto it has ceased to open.  i have tried to Hold down the Command and Option keys on the keyboard but it does not work.  iPhoto still does not open

    Since updating iPhoto it has ceased to open.  I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library,  but it does not work.  iPhoto still does not open.  can someone please help?
    thank you

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Happy Holidays

  • I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the

    I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the top. I've changed my page dimensions in the master page by altering the height, however, these changes have not been made in the subsequent pages up top. How come?

    Several possible reasons:
    1) Is the master page applied to the pages?
    2) Did you increase or decrease the height of the master? The size of actual pages is the maximum of the size of the applied master page and the size that's required to contain the content that's been laid out on the page.
    3) Has the minimum height of the non-master pages ever been set? If so, it overrides the master page value. To get the normal page to again honor the minimum height set in the master page go to the individual page in the Plan view and use the context menu to select "Reset Page Properties". This will revert all the page properties to match those of the applied master.

  • HT4623 so I am updating my phone to the newest IOS and it has been doing it for hours.  I have now plugged it into the computer and it says that it is in recover mode and I should restore it?  What does that mean?  Do I lose everything on my phone?

    I am updating my phone to the newest IOS and it has been doing it for hours.  I have now plugged it into the computer and it says that it is in recover mode and I should restore it?  What does that mean?  Do I lose everything on my phone?  Is there anything else I can do?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • HT1920 I have got a Activation Lock on my iPhone and I need to get it activated. I don't know what Apple ID I was using with my iPhone. It shows as U***@h******.uk which is too short to be my email address. I have reset all my Apple ID passwords and none

    I have got a Activation Lock on my iPhone and I need to get it activated. I don't know what Apple ID I was using with my iPhone. It shows as U***@h******.uk which is too short to be my email address. I have reset all my Apple ID passwords and none are activating my iPhone. I have also been into the apple store and they have tried to find out the Apple ID my iPhone was using but this was not successful. The serial number of my iPhone is: C32JN641DTWF

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • My iPhone 5 was stolen and ever since has been showing offline in the 'find my iPhone app' this has been showing since the theft does this mean that they have failed to get into the phone and it has been switched off

    My sons iPhone 5 was stolen out of his blazer pocket while in a games lesson, this was last period and on return to get changed find that someone from his class had stolen his phone from his zipped pocket. Straight away I went onto the find my iPhone on my phone and it has been showing offline since the phone was stolen. The phone had a password set on it and I have notified the police, school and also our carrier. The phone has been offline now for 32 hours, would this mean they have been unable to access the phone and switched it off? Is it possible for the phone to be jail broken while this password has been set. I am most angry that this has happened and the changing rooms are always locked while the lessons take place, so this is someone within my sons class that has stolen the phone. Being a Friday And last lesson the phone is long gone now but I'm hoping with the security measures we have put in place with the pass code etc.... That they won't be able to unlock the phone to use it. The phone was only 2 days old as my son had only just upgraded :(

    All you may infer is the device hasn't been turned on where it can connect to Wi-Fi.
    The phone may be jailbroken if there is no lock passcode to prevent access. However, the phone can be completely erased and restored as new. In this case you will have no ability to locate it or prevent it from being jailbroken.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • I have lock iPhone 5 from Japan, i don't know from which carrier it  is belongs to currently I am in Saudi Araiba, how can i unlock the phone and use here)

    I have lock iPhone 5 from Japan, i don't know from which carrier it  is belongs to. currently I am in Saudi Arabia, how can i unlock the phone and use here)
    <Personal information edited by Host>

    You can't.

  • My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.

    My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.

    Good to know that, but what can I do to get the mail and contacts downloaded from Icloud onto my Iphone?  I am told that the password needs to be reset and I have erased and reset it 3x's already? Should I Restore All Settings or Restore Network Settings or will that result in a situation where I have to have it re-unlocked again? GRACIAS!

  • Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • Bridge mode of controller base ap

    I have testes two standalone ap is able to connect thorugh root-bridge mode and non-bridge mode, but when i try to the non-root bridge ap to controller base ap with bridge mode enable is fail, is there anyone can provide some suggestion?

    Ras good reply my friend +5.
    Chun -- Correct if you put it into workgroup bridge mode it will connect. You mentioned you were in root / non-root. It will not if thats the case.
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
    ‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

  • I have received a disk of photos which are avi files, what software do I need to download to be able to view the slideshow and save them within i-photo please

    Having had some photos done at a photographers, they have passed me the disc of the slideshow, which is in avi format, however I cannot view it on my imac, I would be really grateful if someone could advise me what software I need to download that is compatible with the imac whereby I can view the slideshow and also whether I can then save the slideshow to iphoto.  Hope you can help, I am not great with technology as you can probably guess.

    I use Smart Converter which is free on the App Store. It is easy to use , just drag and drop the files to convert to Quicktime , takes no time and great results.

  • Does airport express have to be wired to the internet

    I have a new BT Infinity HomeHub and I want to extend the range of it's wireless capabilities using an airport express, in another room/part of the house. I want to know if in order to use this airport express as a bridge to extend the internet I have to plug it into the internet directly via an ethernet cable or just plug it into a wall and it will wirelessly connect and boost my signal stregnth. Thanks.

    Karen534 wrote:
    I have a new BT Infinity HomeHub and I want to extend the range of it's wireless capabilities using an airport express, in another room/part of the house. I want to know if in order to use this airport express as a bridge to extend the internet I have to plug it into the internet directly via an ethernet cable or just plug it into a wall and it will wirelessly connect and boost my signal stregnth. Thanks.
    You wil need to connect it to your HomeHub with a Cat5 cable, it will not extend wirelessly.

  • Hello you can help me my ipod or itunes I do not have total spins music on the ipod and not all the photos I've just not very much since I have up loaded the latest version 5.0 please help

    hello you can help me my ipod or itunes I do not have total spins music on the ipodand not all the photos I've just not very much since I have up loaded the latest version5.0 please help

    First of all, you should always save you photos on computer like any other digital camera.
    Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
    Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
    What computer do you have?

Maybe you are looking for