Since downloading iSO 5 i can no longer connect to a wireless network.

since downloading iSO 5 i can no longer connect to a wireless network. I have tried both at home and at other wireless hotspots. it would appear that none of the previous wireless connections work either? i just get the error "unable to connect to "x"
i have tried to "forget" and rejoin but that has not worked either.
what to do pleeeease?

Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
Did you try to reset the network settings on your device?

Similar Messages

  • Can no longer connect to my wireless network started today

    every time i try to connect to my network it says connection timed out. i can connect using cable... and my windows laptop is connecting to the network wirelessly. Any sugestions

    Be careful…
    There are two pieces to connecting to a wireless router, getting connected to the network itself and getting an IP address.
    If the AirPort icon shows you as connected that means you are connected to the network (and any passwords required have been accepted); the self-assigned address means you haven't been able to get an IP address from the DHCP server on your network.
    If that's the case, the next question is why, and to figure that out you need to know who normally assigns IP addresses on your network - a cable or DSL modem, some other machine, a wired router or your wireless router - and try and debug things from that end.
    I've mentioned before cable modems as an example; they typically only assign one to three IP addresses and often need to be power cycled before they will assign any more. This is cable companies' way of having multiple hosts slam the modem with data; if you have to have another router in the path the router to modem link becomes the bottleneck, not the modem itself.
    So the next question is who is responsible for assigning IP addresses (via DHCP) on your network?

  • Lion - can no longer connect to WD wireless network / hard drive.

    I upgraded to Lion and now I am unable to connect to my WD wireless network hard drive.  it tells me that the version of the server I am trying to connect to is not supported and to contact your system administrator to resolve the problem.  Suggestions?

    See #C16 in Time Machine - Troubleshooting.

  • HP C510A eStation Printer - Zeen: Not Connected - Can No Longer Connect To My Wireless Network

    Up until a couple of weeks ago, my C510A was working well.  Every so often the wireless sync would fail and I would have to resync the Zeen tablet, or unplug/replug back in the printer to regain sync, but now...  Nothing!
    My Firmware is: ZEP1CN1130AR
    Printer IP: 192.168.1.74
    Zeen IP: Not Connected
    SSID: Visible
    Mac Filtering: None
    Security: WPA/WPA2 PSK
    Signal Strength 3-4 Bars (I can move closer to the router and watch the bars increase, and move further away and see them decrease.  So the wireless radio is on and functioning within the Zeen!)
    The Zeen cannot connect to my network and is never given an IP address, so I can't set the printer up with a static IP address.  It just keeps trying to sync with my network and failing.  Over, and over, and over, and over again...  I have reset the Zeen to factory using the Power On/Volume Up combo.  I have uninstalled my HP printing software suite, redownloaded the latest version of the entire suite from the HP Support site, and have installed the drivers/printer both wirelessly and via a USB connection.  I have powered down my wireless access point and powered it back up to see if that helps, but nothing does.
    uVerse Cisco 2Wire i3812V Gateway/Router
    Netgear WNDR3700-V1 configured as a wireless access point (Thanks to the crappy 2Wire POS above.)
    I have numerous laptops (Mac and Windows), a Mac Mini, 3 tablets (WebOS, IOS, and Android), IOS and Win8 mobile phones, a Roku 2 XS, various TV's and Blu-Ray players, a Wii, and this malfunctioning HP printer connected to my network via 802.11 DB wireless AND a wired gigabit network.  I run a Plex Media Server on the Mac Mini which is my HTPC for our home.  The printer was working fine in this setup until a couple of weeks ago.
    From reading the many Zeen threads here, and on other forums, it's obvious that there is some sort of ongoing connectivity issue with the Zeen tablet on this printer.  HP has been conspicuously silent on the issue, and there is precious little to go on in the HP Knowledgebase, or in replies on this forum.  I've suffered through being hung up on, as well as trying to explain my problem to tech support reps who both do not speak English very well at all, and are unable to grasp concepts and analogies in English.  
    My frustration level is HIGH at this point.  My printer is out of warranty, and if there is a hardware issue with the printer then I fully expect to have to make the decision as to whether it's worth repairing or not, but I do FULLY expect to be able to talk to someone in technical support who speaks English about the issue and try to diagnose and fix the problem if it's just a software/networking/configuration issue at NO CHARGE, just like I do with every other product that I own!
    So I'm coming here to try and find an answer to my problem before I reach the point, and it's very close right now, of totally severing ties with HP, Compaq, and all the rest of their subsidiaries both here at home, and at the company I manage (where I pretty much make all of the hardware decisions).  This just isn't the way to treat your customers.
    Any help and suggestions are greatly appreciated.

    Hi,
    When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
    So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
    You may try the steps below as of now and check the results.
    We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
    Once it is docked try the steps below:-
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    Open the above link; and then perform the Factory Reset as shown in Solution Two.
    Once completed try connecting to Wireless and check the results.
    though I am an HP employee, I am speaking for myself and not for HP.

  • HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

    My IPAD 3 [5.1.1 (9B206)] has a problem.
    - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
    - It can no longer connect to the mobile network orange except Wireless (WIFI)

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Why can't I connect to my wireless network?

    Why can't I connect to my wireless network? My phone is set to it but I can't connect with my ipod touch. Do I need to reset my wireless?

    - Reset the iPOd. Nothing will be lost
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Is there a way to configure win 8 Laptop to airport express?  I can see theN connection to the wireless network, but troubleshooter suggests there's t

    Is there a way to configure win 8 Laptop to airport express?  I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
    shows limited.  Any help you could provide would be most appreciated.  Further, should I simply buy another router for the windows machine?  If I did that, would it interfere with the airport?

    The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS.  This is mainly because the RAM designed to fit with the customized Linux OS's size.
    You can connect to an external HDD via a  USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
    You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
    Hope that helps!!

  • TS2756 since ios6 update I can no longer connect my ipad to my iphone hotspot

    I updated both my iphone 4 and ipad 3 to ios6.  Since then I can no longer connect my ipad to my iphone personal hotspot.  I did the reset network on both devices.  It did work for one session but then I could never get it to work again.  Has anyone found a fix for this?  Should I call my carrier?

    Follow the troubleshooting steps outlined in the troubleshooting document from which you posted your question.

  • Can no longer connect to encripted wireless.

    Hello,
    I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
    The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP.  There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
    February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
     Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
    I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
    What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
    I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.  
    Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
    I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
    I look forward to any help.
    Thanks,
    Martin

    First of all, re-download and re-install the latest firmware for your router.  After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
    Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast.  Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router.   I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
    As a test, turn off all your 2.4 GHz devices and unplug them from the wall.  This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc.   Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band.   See if this makes a difference.
    Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption.  Please explain.  Are you saying that the Windows software was doing the WPA for you? 
    Update you computers with the latest drivers for your wireless adapters.
    As infinityx mentioned, update Windows XP to at least SP2.
    It sounds like you may have the Intel Pro Wireless 2200bg card.  If so, this card is known to have connection problems.  The problems with this card worsened with a recent Windows update, but were fixed with the latest driver.  Go to the Intel web site and download and install the latest drivers.
    Also, you can try another channel on your router.  Since you have a neighbor on 11, try any channel 1 thru 6.  (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
    Message Edited by toomanydonuts on 03-16-200704:01 AM

  • HT4623 My new iPad can no longer connect to the 3G network. I keep getting the message "could not activate cellular date network".

    I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!

    No. You can't

  • Can no longer connect to my wireless router in my home

    Can no longer connect my ipad to my wireless router in my home

    Have you tried rebooting the router? Unplug it for about 30 seconds and then plug it in again.
    Turn Wifi off and on on the iPad? Reset the network settings? Forget the Network?

  • My MacBook pro will no longer connect to a wireless network that I've been connecting to automatically for months and I'm not given the opportunity to re-enter the password.

    I am trying to connect to a wireless network that I have connect to automatically for over a year. When I try to connect I simply get the following message: "the wifi network xxxx could not be joined". I have moved closer to the router as suggested and I have attempted to run diagnostics without luck, I have rebooted, I have toggled the wifi on and off. I'm at a loss now...
    My MacBook Pro system is running OSX 10.9.5, 2.9 GHz Intel Core 17 processor, 8GB 16000MHz DDR3 memory.

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try another cable

  • Airport no longer connects to OPEN wireless networks

    Lots of people seem to think that their airport keeps dropping the connection to OPEN wireless networks because of the 2008-001 airport update. That is probably only true for a Macbook 2,1 (aka Macbook Core 2 Duo).
    I had the issue on my Macbook 1,1 (aka Macbook Core Duo). I wiped the system clean. Re-installed OS-X. Applied all updates BUT:
    1. Airport 2008-001
    2. Security update 2008-002
    I also downgraded the Airport firmware to 2007-004 (aka version 1.1.9.3).
    Technically speaking this should have resolved the issue but it didn't.
    Why do I believe it should have resolved the issue? Because the same approach worked on the Macbook 2,1 and they both have the exact same Airport card.
    Now I have no idea how to get it fixed - I think I have tried every possible way. There doesn't seem to be any way to contact Apple coz I don't have a support contract.
    But hey, do I need a contract? Apple broke this for me ... they should fix this. I am about to post this as a tech article on engadget and other places because there are SO many people suffering from poor testing on Apple's behalf.
    Apple, please respond.
    Thanks.

    Visited the "genius" bar this afternoon - what a trip!! The guy said this is a Verizon issue, period. I was like you must be kidding, there are SO many people out there who got affected and not everyone uses verizon ... he actually got pretty mad and said you should be using mac hardware (router) and secure network. I even told him my second Macbook is working fine on the same Verizon network. This is their new location in the Northern VA area at Fair Oaks Mall.
    I would call that guy anything but a genius, what a waste of time. This was my first and last trip to a "genius" bar.
    If anyone comes across any new ideas, please share.
    Thanks.

  • HT4061 since downloading IS07 I can no longer send emails via hotmail on my Iphone 5

    Since downloading IOS7 to my iphone 5 I can no longer send emails via my hotmail account  - receiving ok though.  How can I fix this?

    Chris
    thanks to your prompting, i found another mail icon that when touched requested a password. i now can send photos once again
    woohoo
    thanks again
    bpb

  • Since updating firefox i can no longer connect to pogo error message says i have no java yet test say i have lates current update of java

    i updated firefox and now i can no longer access pogo.com it states that java is unavailable on my pc. When i run test for Java it states that i have most recent update installed and it is operating

    I don't know what test you are looking at. You have Java 1.6.0_11, which has known security issues; the current version is 1.6.0_21. For updating see below.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Macromedia Shockwave for Director Netscape plug-in, version 11.0
    * Adobe PDF Plug-In For Firefox and Netscape (you '''<u>MAY</u>''' need to update)
    * Java Plug-in 1.6.0_11 for Netscape Navigator
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
    #**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
    #**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link and more information</u>''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    #*After the installation, start Firefox and check your version again.
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    #* Removing old versions: http://www.java.com/en/download
    #* After the installation, start Firefox and check your version again.
    <br />
    You have an item installed that is considered malware/spyware/adware, "My Web Search Plugin Stub". This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
    #You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
    #*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
    #*See:
    #**http://www.safer-networking.com/removemywebsearch.php
    #**[http://www.pchell.com/support/mywebsearch.shtml|PC Hell: My Web Search Removal Instructions]
    #**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
    #You '''MAY''' need to change a preference to reset your default URL/location bar search provider:
    #*Enter '''about:config''' in the address/URL bar and press the Enter key
    #*If you see a warning, accept it (Promise that you will be careful)
    #*Filter = keyword.URL
    #*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
    #*Restart Firefox (File > Restart Firefox)
    #*See: http://kb.mozillazine.org/Keyword.url
    #You '''MAY''' need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
    #*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    <br />
    '''<u>You can remove "getplus" (shown in your plugins)</u>''', the Adobe Download Manager. You do not need it and it causes problems for some users:
    *http://www.msfn.org/board/remove-adobe-getplusr-t139454.html
    *http://www.nosltd.com/index.php/support/support-faq
    '''<u>To avoid installing "getplus" for future Adobe Flash updates</u>''', follow the link in ONE of these articles:
    *http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin
    *http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    *'''NOTE''':
    **You must update both IE and "all other browsers (including Firefox)" separately; 2 downloads, 2 installs
    ***IE direct download link: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    **Vista and Windows 7 users may need to right-click the installer and choose "Run as Administrator"
    **You must check the small "I accept license..." box for the Install button to become active
    '''<u>To avoid installing "getplus" for future Adobe Reader (PDF) updates</u>''', do one of the following:
    #Update from your existing Adobe Reader
    #*Open Adobe Reader in your programs
    #*on the Adobe Reader menu, click Help > Check for updates
    #Download the complete installer from the Adobe site
    #* go to http://get.adobe.com/reader/
    #* follow the instructions illustrated here: http://www.techerator.com/2010/07/how-to-install-adobe-reader-without-installing-adobe-dlm-download-manager-browser-plugin/
    #** '''<u>DO NOT</u>''' click the "Allow" button just under the tabs; that will install the "getplus" plugin only and will not install/update Adobe Reader
    #** click the "click here to download" link avoids the "getplus" plugin and begins the download of Adobe Reader without "getplus".
    You can always check the status of some of your plugins here: http://www.mozilla.com/en-US/plugincheck/
    *'''Note: plugin check page does not have version information on all plugins'''

Maybe you are looking for