Since early August I cannot print from my Mac Firefox 3.6.9 but I can print from Safari and want to be able to print from Firefox.
On August 6, my ability to print from Firefox 3.6.9 on my iMac to my HP OfficeJet Pro 8500 which had been working beautifully till then stopped completely. I learned I could print from Safari, but for various reasons, including the fact Safari is not really compatible with the Learning Platform Angel, I need to be able to print from Firefox -- which I use all the time and like.
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages
Similar Messages
-
When i plug my external hard drive into my mac i'm able to see all the files on it and move files off the hard drive to the mac, but not the other way around. I need to make more room on my mac and would really like these files to be on this particular external hard drive. Any help would be great!
Thank you
KrisThank you all. Sounds like i might as well buy a new (mac OS supported) external hard drive. Not worth the hassle/risk of taking all the old files off my current external HD.
Really appreciate all your help!
Kris -
Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?
Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian -
I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer
I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.
Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs. -
I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.
When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/ -
I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.
You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
where can i find my videos i synced from ipad to pc? i can't locate where it has been saved. it's no longer found in my ipad and can't find it either on my itunes where i synced the files. this videos are not the one saved on the photos but in the videos folder itself. please help me with this.
Syncing copies content from your computer's iTunes to your iPad. If they were films and/or TV programmes that you bought from iTunes which were in the Videos app and you've copied them over to your computer's iTunes (did you do File > Devices > Transfer Purchases ? or a taking a backup should have prompted whether to copy iTunes downloads over) then they should be in the Movies and/or TV Shows part of your library.
If not then you might be able to redownload them, depending upon your country and if they are still in your country's store, via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes, and the Purchased tab in the iTunes store app on your iPad -
i was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?
You may not be able to get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, particularly if the problem was on their end preventing the movie from downloading in a reasonable time.
Good luck. -
I have a G5 to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Any way to do it?
Do you have another Mac? If so, you can startup this one in "Target Disk Mode" (instructions here) and connect it to another Mac to delete the home folders (or the entire drive, if that's what you want).
One piece of advise, though: after deleting the data, and of course emptying the Trash, it wouldn't hurt to also securely erase the "free space" of the drive (instructions here) before disconnecting the old Mac from the new one. This can be helpful, since "deleted" data is often retrievable with ease unles it's written over after the deletion. -
i just bought an imac and want to transfer all my music from an iphone to imac - how is this done please
1) authorize iTunes on the new machine for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
I have re-installed I-tunes and have a new operating system (Win 7 Pro).
I now cannot sync as I-tunes says my I-Pod is already connected to a library and wants to erase my music on the I-Pod. What do I do to get around this problem?An iPod is designed to be synced with only one computer/iTunes library at a time. If you try to sync the iPod with a new/different iTunes library, iTunes on the new/different computer will replace the contents currently on the iPod with whatever is currently stored in its own library.
If the music and content on your iPod is not in iTunes or in a backup somewhere you can use the information in this user tip from another forum member turingtest2 to help you copy this content from the Nano back to the PC and into iTunes.
https://discussions.apple.com/docs/DOC-3991
B-rock -
I just want to be able to print my pictures and know where to send my memory card.
I just want to be able to print my pictures and know where to send my memory card. HP Photosmart Plus, Windows 7
please tell the complete printer name
using memory card frm printer or computer
if printing from computer go to my computer go to memory card or flash drive & acess the memory card & print the picture file that you would like to. If you like to print frm printer put the memory card to approprite memory card slot & then select the picture to print it will work -
i have reinstalled snow leopard 10.6.8, and want to restore my i photos from time machine. Can not find i-photo libary in time machine, can't not find > home-pict. iphoto lib. in time machine. Please help.
On my HD it does not say ,restore, in yourname -pict. Iphoto lib.,
On the time machine, it , yourname etc, oes not show up at all.
Only right side of TM, your name etc. does not show. -
WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options? -
I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?
joycesalvador wrote:
... But I can't activate it after the upgrade. what to do?
See this discussion.
https://discussions.apple.com/message/21189708
Maybe you are looking for
-
NameSpace not recognized in Call-template
I have declared name space xmlns:StringUtils="http://www.oracle.com/XSL/Transform/java/com.xyz.xyz.utils.StringUtils" as part of the stylesheet element. When I use this name space in calculating a variables value XSLT processor picks up properly. But
-
"Sync encountered an error while syncing: firefox sync server maintenance is underway, syncing will resume automatically. sync will automatically retry this action" if i click on server status then it says " There are no known problems at this time.
-
How to change NLS parameters in Oracle XE?
Hi I have to change some parameters in database using Oracle XE server but I don't know how to do it. I must change these parameters: NLS_CHARACTERSET NLS_NCHAR_CHARACTERSET How to do it? Thanks for help.
-
I am developing my application in Company environment. Whenever I posted in forums, helpers asked credentials on apex.oracle.com. Roel mentioned to create a sql file with all your data definitions (tables, packages etc) and data. But he did not have
-
Hi Im basically building a 3d engine (very simple one) using software rendering (no opengl or directx) for learning purposes. The 3d engine has one simple rendering method thats suppose to render a point from world space to the 2d space (monitor) i b