Since Firefox installed a new version on my Mac, I've not been able to use an AOL games site, I've always used. I need to uninstall the
Yesterday firefox installed a new version on my Mac OS X. Now my Mac keeps freezing immediately upon trying to use the AOL site Games.com when I register as a guest. This usually happens during the first game of pinochle. Although I have used computers with technical proprietary programs at work for over 25 yrs, I am a neophyte with all this web stuff and I need help. I do not wish to receive programs which have not been de-bugged. And I wish to have the problem fixed. If you are going to instruct me keep it elementary and step by step.
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Similar Messages
-
I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.
Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem -
I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured. -
When I open iTunes, this window pops up. "A required component is not installed. Please reinstall iTunes. (-42076)" I have not been able to sync my iPhone after restoring it. Can anyone help?
Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.
-
since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please
since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please
-
Since I installed a new Belkin router, my macbook pro can not connect to pop mail.
Since installing a new Belkin router, my macbook pro is unable to connect to my work pop mail. How can this be resolved?
I asked the hosts to relocate your post to the MacBook Pro forum.
-
I just got a new iPad 2 and I have lot of questions. I was able to wirelessly link my iPad and iTunes on my PC. I was able to SYNC my email and calendar (new entries only no history), however I have not been able to SYNC Outlook contacts. Outlook has multiple contact lists. Only one has any data. I can't find a way to delete the others and I can't keep the one I want to use at the top of the list. Any ideas?
I have a question about email. I have several thousand emails in 10 or so days. How can I select multiple emails for deletion in stead of one at a time? How do I designate emails from a given sender as junk or block certain senders?
Ronthe spcs page on this site state which video formats the ipad supports
I'd suggest converting your old videos to one of those formats
handbrake is a free program which does this for you
itunes used to be able to too when I right clicked incompatible media but don't see the option any more
or maybe it only show when one right click incompatible media and currently my lib don't have any
about the music then it's odd what formats are they?
if they are acc protected have you tried to remove the DRM this can be don using itunes as
apple don't use DRM for music any more -
I would like to upgrade Firefox to version 5 from version 3.6.19, but have not been able to???
The computer I have is a Mac G4 with system 10.5.8 installed and working well.
The processor is 1GHZ
The memory is 768 MB DDR SDRAM
I hate the idea of giving up this computer, just because I can't run the latest version of Firefox.Sorry, Firefox 4 and later version don't support PPC Macs.
For older Macs that aren't supported in Firefox 4.0 & 5.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
http://code.google.com/p/tenfourfox/ -
I go into pogo, click on a game, wait , wait, wait, then oop's message
There seem to be a problem with the Firefox 3.6.14 version and Pogo.com
* https://support.mozilla.com/forums/contributors/705144
* [https://bugzilla.mozilla.org/show_bug.cgi?id=629030 Bug 629030] - Java JRE broken in FF 3.6.14 [pogo.com] (please do not comment in bug reports; you can vote instead)
You can try to revert to the previous version until this gets fixed:
*http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.13/win32/ -
After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have downloaded firefox for my MAC OS X Lion, just purchased in December, and have done so several times but when I try to install it per the directions, nothing happens. The file that shows up says Alias in my applications and your instructions to Eject Firefox from the menu are not clear to me. Firefox does show up in the "Window" box but that's the only place it says firefox. Whenever I click on the folder, it seems to be emily. This installation process just doesn't seem to be working or either I'm not understanding it.
You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
Usually, when I put album artwork, I go to get info for the whole album and copy and paste an image I get off the Internet. But every time I do this, all that shows up is the color black! I have no idea what to do. Please help.
It's a bug with iTunes 10.4.0.80. If you copy and paste from some web browsers or an image editor then iTunes pastes in a transparent image of the same dimensions. This shows up black in the artwork panel at the bottom left or white in the get info art viewer.
If you work with an image file stored on your computer you will get better results. Use the artwork box on the Info tab of the Get Info. dialog for multiple tracks to replace all existing images. With a single track you will need to delete the existing corrupt images from the Artwork tab first.
tt2 -
LR 5 - using it on a MAC-
Error message: "the following files were not imported because they could not be read (335).
I have been working with several forums and have tried all recommendations and none have worked.
I have tried reloading new LR 5 - and it worked for a short time and then stopped.
Very frustrated that I cannot talk with someone at Adobe.
The folks that have made recommendations are great but once their suggestions dont work they drop the link,
Is there someone or someplace I can take my computer to fix this issue.
It seems to be a problem between LR and Yosemite.The permissions have been changed on the destination folder where the photos are to be copied into.
You must make sure that the permissions are set to Read and Write.
Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be. -
My iPad is currently on OS version 7.1.2 and has not been upgraded to 8 yet. If I do an "Erase All Content and Settings" on the device will the device be forced to upgrade to 8 ? I would like to keep the device at 7.1.2.
To Perform the Erase All Content and Settings directly on the iPad it does not need to be connected to a computer.
In fact yes, is better if its not connected to one, but simply connected to its charger, and have it plugged in. Erase All content and settings, will not update the iOS.
If you restore the iPad using iTunes on your computer with the iPad connected, then it will update to iOS 8. Because the restore will place the newest available iOS version supported by the Phone on it.
Basically disconnect the iPhone, plug it in to its charger, and the charger to the wall, and then on the iPad go to Settings->General->Reset->Erase all Content and Settings. This will wipe clean the iPhone but will do nothing to the underlying iOS installation.
Once everything is removed, you can plug it into iTunes and sync your content back. Do not attempt to restore from backup while connected to iTunes, as it will update the iOS version in the process. Simply sync and you should have no issues. -
I cannot uninstall Firefox and it won't let me install a new version.
Firefox will no longer open up so I can use it to browse. I tried downloading it to reinstall but it tells me I have to close Firefox as it is running. How do I do that? I've always used Firefox as my browser and now, it will not open so I've had to switch to Chrome or IE. I would like to have my Firefox back. How do I fix this? If I try to install a new version it repeats the 'close Firefox as it is running'. But yet, I am not using it as it will not open.
I found out I have the same problem. Everything but New, Choose New Theme and open are available. However, when I click new or choose nothing happens. I've reinstalled twice but I can't find any answers.
Maybe you are looking for
-
1.2 JVM crashes using XML SQL Utility 1.1.10 (NT 8.1.5)
I am trying to use the XML SQL Utility for Java (Oracle 8.1.5) to obtain a DTD or XML schema for tables in our database. I have installed the XSU111.ZIP archive, set the CLASSPATH and stuff, loaded the JAR files (xmlparserv2.jar, oraclexmlsql.jar) pr
-
Embedding cam feed in web page
There have been a number of postings on this topic but here is a new thread. Users (me included) have noted that it is possible to embed a feed as shown here: http://fentyler.pwp.blueyonder.co.uk/mike-cam.htm This technique does however require Windo
-
After Upgrading my Library does not Display
I backed up my entire Macpro and did a clean install of Leopard and iPhoto 08. I copied the contents of my backed-up pictures folder to the pictures folder in the new install of Leopard. IPhoto 08 shows my albums and folders on the left side, and the
-
How to watch a tv show on ipad
How to watch a tv show on ipad
-
Movie clips selecting current target
Hi I am currently stuckon what i think has to be a simple problem:) the jist of it is as follows. I have a movie clip on stage that is clickable. Once clicked I creata new movie clip and attach a movie clip from the library. At this stage i also crea