Since i can't get Adobe to work for my games on ipad what do i do

I can't get Adobe to work on my IPAD, i get something that says Adobe and apple are having problems. Is there anything else i can use other than Adobe flash?

Flash is not supported on the iPad, and probably never will be.
Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire, iSwifter, and Puffin which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

Similar Messages

How do I cancel hbo now since I can't get it to work?

how do I cancel hbo now since I can't get it to work?

If you are being charged through iTunes then there are instructions on this page to stop it renewing : Manage your auto-renewing subscriptions - Apple Support

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

Can't get itunes to work for windows xp 64 bit

I can't get itunes to work for windows xp 64 bit. It won't even download.

These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

Can't get Extreme to work for me

I bought an Airport Extreme in May and just cannot get it to work for me. It most likely has to do with my settings as it seems complicated for me. My ISP refuses to help me other than providing me with some router/IP info. They claim they have had problems with Airport Extremes (anti-Mac) and do not know how to help me and I should contact Apple. My ISP also claims they have been successful with their few Mac clients using NetGear and they can help with that.
This is depressing to me because I am loyal Mac user and have never had problems with any Mac product. But I can't figure this one out on my own. I do not see phone support for the Airport Extreme and I feel exhausted by this.
Is anyone is willing to walk me (could be painful) through this or willing to buy my Extreme and I will concede to my pro-Windows ISP. In the end, all I want is one of my computers to be online wireless.
Sigh.
Jeanine
PowerMac G5, dual-2.0 ghz Mac OS X (10.4)

Hi Jeanine,
Don't assume that it is just a question of anti-Macness. There are legitimate reasons why an ISP (or a business) decides not to support this weird device. It goes against most of what is considered reasonable by the leading manufacturers, but hey, it's Apple. They usually don't care about that as long as they have loyal customers who still trust Apple.
I'd say that the critical settings are in the Internet tab. Assuming you have your computer connected to the airport using an Ethernet cable, and that you have the Admin Utility running, go to the Internet Tab and make sure that:
1. Connect using: Ethernet
2. Configure IP - It depends. You say that your ISP has given you some router/IP info. In that case, you need to choose "Manually" and enter all the fields following this setting. Otherwise, they might have told you that you will be assigned a DHCP address, and in this case choose "Using DHCP." The last two boxes ("Domain Name" and "DHCP ID") are usually not utilized.
3. For "Ethernet WAN Port" Automatic should suffice, but in my case, I had to force it to 100 Full Duplex or otherwise wouldn't work. Go figure!
4. For Connection Sharing, most probably you'll have "Share a public IP address" but if the ISP gives you a set of addresses, you may need to choose "Distribute a Range..." Not probable, though.
Leave the other two tabs as default, but make sure that your computer has DHCP enabled.
Following this steps won't give you a fully working wireless network (we have not configured anything yet) but at least should give you a working state for computers connected via Ethernet wire. We can take the next step then.
Good luck. This router (and the iPhone for similar reasons) are going to make may Apple loyal customers rethink future purchases. It has certainly happened to me.
Paco

Can't get Themes to work for movie using iMovie on ipad

I finsished a trailer using iMovie on my iPad successfully and LOVED it! Sooo fun!
Now I'm trying to make a movie for a friend's wedding, but I can't get it to work with the themes. When I select my theme and start a new project using a few pictures the theme music works when I replay, but no visual elements of the theme I selected show up (or available for selection). when I click on the gear wheel, it does show what theme I selected.... What am I missing???? The only place the theme shows up is on the tile in the "projects" section.
Then I tried the same thing on my iphone 4S (iOS7) and the same thing happens.
I looked at the tutuorials etc...and I think Im doing it right (after all, I got the trailer to work perfectly) and I think I'm not technologically challanged - but I just would like to have the theme visual elements to show up.
Please help
Mir

Tap the Transition points and choose the star icon. This is for theme associated transitions including their graphic elements.

I bought a magic mouse today, they told it would work with the new iPad, I can't get it to work for me, does anyone know how or if it works?

I bought a magic mouse, was told it works with the iPad, how can I get it too?

A mouse, which is a pointing device, will not work with an iPad...there is no cursor for the mouse to move around. You must use the touch screen.

Can't get audio to work for HD DVD

Anyone have any insight into what audio enoding works for HD DVD? I've tried both aiff and ac-3 to go along with MPEG2 video and my Toshiba HD A2 won't play back sound from either type. Help!

I have used both on the Toshiba A2. I assume the build file had sound when you tested it in the Apple DVD Player?
I have not played with the audio settings much on the Toshiba, do not know if there is a setting there that can change things.
I can take a look and run some tests to see if I can get it happening. Also if you like I can put together a small project to see if you can also get it to run.

Can't get printer to work for my life

kernel 2.6.25
printer: HP laserjet 4
usb
CUPS
Even if printer is on at boot, printer won't work.
This has happened before, and I can usually get it working after fiddling with it for 10-15 minutes, then it stops working promptly.
I had it working a few nights ago, now it has stopped again.
dmesg
input: Video Bus as /class/input/input6
usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x0557 pid 0x2006
usbcore: registered new interface driver usblp
sdhci: Secure Digital Host Controller Interface driver
What should the URI for a usb printer be?
USB is not an option for "Device for PrinterName" in the CUPS web interface
I can print from vbox on this machine, so this is slightly less urgent.
Last edited by Raccoon1400 (2008-06-18 23:07:06)

Raccoon1400 wrote:
There is no hub. The laptop has 2 ports on the front, 2 on the back, with the printer plugged into the back.
If it matters, this is a parallel printer, with a parallel to usb cable connecting it to the machine.
Now that we know the usb port number the printer is plugged into, we should be able to figure out the uri.
EDIT: lsubs shows the same whether printer is on or not.
An adapter, my mistake.
I had a parallel printer plugged into a USB port through an adapter for a while, and it exhibited the same behavior. My "solution" was to delete the printer and then recreate in CUPS. Sometimes the interface would reappear and sometimes it wouldn't.
Dusty started a thread about this a while back, and I was the last one to answer. Maybe you can get a hold of him and see if he had any success.

How can I get Adobe Media Gallery for Bridge CS3

I want to create an online photo gallery for 3rd party client proofing. I am using a reference book byScott Kelby (the editor of 'Photshop User' magazine) and he refers to Adobe Media Gallery: ( Bridge CS3 / Windows / Workspace / Adobe Media Gallery).
He states that although AMG wasn't initially shipped with CS3, Adobe released a free update for bridge and once installed it is possible to download AMG from labs.adobe.com.
I am unable to find any reference to AMG or any download/upgrades
(Windows XP/ Bridge 2.1.1.9/ Ps CS3 Extended 10.0.1)

Good day Geoff,
You can download the Adobe Reader 10.0.0 installer .EXE file from here:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/AdbeRdr1000_en_US.exe
Once you've downloaded it, you can burn it to a disc or copy it to a thumbdrive to bring to the PC that's offline.
Please let us know if you have any questions.
Kind regards,
David

HT3819 I've always been aware of Home Sharing but haven't been able to get it to work for YEARS!!! What am I doing wrong? I'm using the same apple id on all my devices! Help.

How can I get Home Sharing to work? I've know of this feature for years but have never got it to work. I'm using the same apple id on my devices, which is [email protected] What am I doing wrong? Please help.

http://support.apple.com/kb/HT3819 homesharing
http://support.apple.com/kb/TS2972 troubleshooting home sharing.
i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =)

I can't get inline to work for this simple function.

I thought I understood [Inline] but my app says otherwise.
I've been using [Inline] with great success for a few months now; however, this quick snippet of code won't [Inline] properly. I know this because I've ran numerous tests with the function looped 100,000 times and I'll get around 400ms with [Inline] and 400ms without [Inline].
I could just be really sleepy and frustrated, but I thought I'd try and learn so that I wouldn't make the same mistake again. So here are the guts of the function in question:
var shared:int = 0;
var length:int = goodRegions[index].length;
for ( var i:int = 0; i < length; ++i ) {
     rect = goodRegions[index][i];
     mRect.x = rect.x + masterX;
     mRect.width = rect.width;
     if ( mRect.x + mRect.width > sRect.x ) {
          shared = i;
          break;
for ( var i:int = shared; i < length; ++i ) {
     rect = goodRegions[index][i];
     mRect.x = rect.x + masterX;
     mRect.y = rect.y + masterY;
     mRect.width = rect.width;
     mRect.height = rect.height;
     if ( sRect.x + sRect.width < mRect.x ) { break; }
There are outside variables I didn't include because they are passed through the function parameters.
I would greatly any help I can get understanding what I'm doing wrong.

Ah you know what, I left out a line:
for ( var i:int = shared; i < length; ++i ) {
     rect = goodRegions[index][i];
     mRect.x = rect.x + masterX;
     mRect.y = rect.y + masterY;
     mRect.width = rect.width;
     mRect.height = rect.height;
     if ( CheckForCollisions( mRect, sRect ) ) { <--------------------------- missing from original post
         if ( sRect.x + sRect.width < mRect.x ) { break; }
Since posting I've actually played around with the removal of the extra function and it started to work properly. I don't understand why my Collision check was making the function ineligible for [Inline]...
But maybe this would help:
[Inline]
private final function CheckForCollisions( rectA:Rectangle, rectB:Rectangle ):Boolean {
return (( rectA.x < rectB.x + rectB.width - 2 && rectA.x + rectA.width > rectB.x + 2 ) &&
( rectA.y < rectB.y + rectB.height - 2 && rectA.y + rectA.height > rectB.y + 2 ));
Is it inappropriate to use an inline function within another inline function? Oh and I'm multi-threading my physics code, so this is being ran on a separate thread/worker.

Can't get SSL to work for WebVPN

Hi all,
I'm trying to get webvpn setup, and have it all configured correctly.... but there seems to be a problem with the SSL part.
I can connect on port 80, it redirects to port 443... but never shows the login box, just keeps trying to load.
I can telnet to port 443 fine and i've disabled all other services using port 443 (like http secure-server).
The status is UP for the gateway and context. I've no idea what to do next. It appears to be trying, but not succeeding. I've tried different IPs, on different sides of the NAT. I've tried with loopback ip, ips on the VLAN, the public IP etc.
Please please help, here's some info...
MD1#sh webvpn gate MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
IP: 192.168.2.199, port: 443
SSL Trustpoint: SSLVPN
FVRF Name not configured
MD1#sh webvpn cont MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
CSD Status: Disabled
Certificate authentication type: All attributes (like CRL) are verified
AAA Authentication List: default
AAA Authentication Domain not configured
Default Group Policy not configured
Associated WebVPN Gateway: MD
Domain Name and Virtual Host not configured
Maximum Users Allowed: 25
NAT Address not configured
VRF Name not configured
MD1#sh webvpn install st svc
SSLVPN Package SSL-VPN-Client version installed:
CISCO STC win2k+ 1.0.0
1,1,3,173
Mon 12/11/2006 18:41:54.43
MD1#sh webvpn install st csd
SSLVPN Package Cisco-Secure-Desktop version installed:
CISCO CSD IOS
3,1,1,45
Mon 10/23/2006 11:18:00.42
Thanks
~Matt

PS: I've tried recreating the SSL certificate to no avail.
If i enable the https server for SDM etc, the SSL certificate works fine.

Can't get WRT54G to work for close to a year now.

I've been having major problems with my WRT54G router to work properly, for close to a year now. I have a: Westell 2200 Modem, connected to DSL (Verizon, connected through PPPoE) WRT54G Modem (Linksys) Laptop with Wireless Card (XP) Desktop with Wireless Card (VISTA) Desktop hooked directly to router (XP) The problems are: Connecting directly to modem (ethernet), internet works fine. All my wireless computers SEE the router, and have 5 bars, but I cannot connect to the internet regularly. I've tried everything. Configuring it manually, using the LELA, etc. etc. I've tried every mode on the router. PPPoE, Bridge, Automatic Config, Static IP I've tried replacing the router, 3 times. I've tried upgrading/rolling back the Router software versions I've tried Linksys Custom Support line dozens of times (Useless, and now they wont let me call without taking more of my money) On my Vista, to even connect to the wireless network, I have to reboot 3 times, repair my connection, make 4 failed attempts to connect, finally connect (limited connectivity) I've called Verizon (they blamed Linksys) and I've called Linksys (they've blamed Verizon) On My laptop, I can connect sometimes, successfully, but I have to reset my router about 4-5 times a day. On our Desktop XP (wired to router) the connection resets alot as well. Everyone I know just plugs their router in, and it works fine. I've had to mess around with the options and menus for weeks to even get some internet. Is something wrong here??

These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

Can't get export/import working for Apex

Hello,
We continue to struggle with exporting and importing. This is currently our release process from development area into production. Any better ideas?
The errors have continued to be random but what I currently get is:
Error ERR-1029 Unable to store session info. session=470508247781401 item=40006855470898
ORA-02091: transaction rolled back ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_STEP_PROCESS_FK) violated - parent key not foundWe have an idea that the export is getting corrupted because when we alter a couple of pages and try to export again we sometimes get an ok message that can be imported. Anyone experience this? So frustrating.

Thanks for taking a look at this situations. Since we develop on a development database and run a parallel copy in a production database where we only "deploy" by importing an exported copy from development. Not sure if this is how other people deploy from development into production, in fact I would be keen to know how other people handle this, but at the time I set it up a couple of years ago this was what suggested at that time.
We simply take an export of the entire application where I leave all the defaults that normally come up on the export page. If needed I'll go into the details. But it is very strange that no one else had issues when they exported that the export itself was corrupt? And subsequent exports either get corrupted in other places or "fix themselves." Does this have anything to do with the fact that my application is getting largish (over 125 pages) ?
Thanks for your help

Since i can't get Adobe to work for my games on ipad what do i do

Similar Messages

Maybe you are looking for