Since i changed my "WINDOWS" theme i can not see youtube or any other website normally, tried reading up about it and have gone through every possible guide here but none fixed my problem!
Firefox now shows all websites in a form similar to the one in the following link...
http://imageshack.us/f/268/firefoxproblem1.png/
your help will be Greatly Appreciated
Nvm got it fixed, it was due to Stardock Windowblinded Feature which i had to reset back to normal Windows theme
Similar Messages
-
I have followed every step in the various help pages I was directed to when troubleshooting the inability to install Adobe Flash Player on my Mac using either Safari or Chrome. Everything has failed. I always get the black box that says briefly, "Retrieving instal. . . " and then goes blank. When I close that window, I get the message, "Adobe Flash Player could not be installed." Then it gives some links to follow for troubleshooting. I have followed ALL of the links there and on other help pages, to no avail. I've run into problems installing Adobe before, but it's never been this bad. Would someone please develop another format besides Adobe? Trying to get help from Adobe feels a little like trying to find a building in New York City with no map or GPS. The time required is voluminous, the emotional energy a/k/a frustration is overwhelming, and long before I get anything resolved, I wish the earth would open up and swallow all things Adobe@. Absence that miraculous intervention, I have to figure out what to do next. Does anyone know? Anyone?
Same question, same answer: use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
-
When I open organizer in windows 7 I can not see the top menu
When I open organizer in windows 7 I can not see the top menu
Is the top part of the organizer off screen?
Can you see the minimize and maximize buttons?
Can you post a screenshot of the organizer screen? -
I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.
Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible -
I lost my administrator password and can not install Mavericks, or any other software for that matter. How can I retrieve an administrator password?
Forgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself -
How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this
Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer. -
I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.
Hi ellafromva,
From your description, it sounds like you may have iTunes Match activated; you may find the following article helpful:
Apple Support: iTunes Match on iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5637
Regards,
- Brenden -
Since upgrading my 4s iPhone to the latest iOS , I now can not see many wi-fi locations beyond my home network. Friends can find and connect to many wifi networks yet my iPhone does not even see them. I can not recall prior to the upgrade whether in the settings whether turning on the wifi was shown as wifi or WLAN however the on/off is now WLAN. Not sure what the difference is. I totally reset the phone but no improvement. Can any body help me?
I have tried this however it did not make a difference. I found another user on the support pages that has the same issue.
-
Since you changed the Foxfire format, I can not find anything to locate my emails
I can not locate my emails! Since the changes to the home page, there is no place for me to find my current emails, my past emails or the email files for saving emails. Where are they? How do I find them?
Which page are you using as the home page?
*Tools > Options > General > Startup: Home page
*https://support.mozilla.org/kb/How+to+set+the+home+page
Firefox uses by default the internal about:home page (no internet access required) and that page only has a search bar and a launch barto open other internal setting pages. -
After latest update to yosemite I can not open finder or any other windows from my desktop
I can not open any windows after last update to yosemite. Finder can not be reopened. Software version is OS X 10.9.5, Macbook pro mid 2009.
Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Since the cloud has been updated, I can not see my files on safari. Why?
Why can I not use safari to open my creative cloud page? I used that browser for months and since the cloud has been updated, I can only use google chrome.
Found it in link from https://discussions.apple.com/message/20431895#20431895, Or press ctrl + S to get the left sidebar showing!!!
-
i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush -
Hi,
I have a problem with cursor in RDC 4 Mac Version 8.0.24091.
I am using remotely VS 2012 with dark theme set but I can`t see cursor in source editor. It seems that cursor is drawn black on black background.
Old Remote Desktop Connection.app works fine with same connection, I can see cursor because it is white.
Riso.Hi Riso,
Is there any update?
Thanks.
Jeremy Wu
TechNet Community Support -
I had to download FireFox to be able to access my website in VistaPrint. I have cleared cache, both thru Safari and thru Finder by moving this cache to trash ~/LIbrary/Caches/com.apple.Safari
I have set IPv6 to off, rebooted too many times to count, and I still can not access my VistaPrint website. What is going on here??? I am so mad that I upgraded to this version, and am annoyed that this problem just came up and I cannot find a resolution to it after searching tons of forums and doing ALL they suggested. Can any one help???Safari 5.1.9 and Java 6 are the latest versions available for OS X 10.6.8. To upgrade any further you would need to upgrade to Mountain Lion (OS X 10.8.4) through the Mac App Store.
http://www.apple.com/osx/how-to-upgrade/ -
I have done ample research trying to fix this issue. Including deleting the profile folder in the Mozilla support file, uninstalling and reinstalling, and restarting the computer. None of this advice has helped in any way and I still receive the same "profile is missing or inaccessible." Is there anything beyond this that I can do?
If you still get the "profile is missing or inaccessible" error message then this means that Firefox still finds a profiles.ini file that points to a non-existing profile folder.
You can create a new profile with the Profile Manager if you can't locate this profiles.ini file.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
Labview 2013 report generation toolkit word 2010 insert table problem
Hi, I am currently evaluating LV2013 with respect to the report generation toolkit for use with word 2010. My Vi/program won't insert the correct table and gives me an error message. see below:- Exception occured in Microsoft Word: The requested memb
-
ICM_HTTP_TIMEOUT error
*Hi Experts,* found the following error in the integration engine for the message. using File adapter(FTP) and we are using BPM for this scenario. <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlns
-
Sharing photo's in aperture en iphoto
I have all my photo's in Iphoto. Now I want to use Aperture, but my wife still wants to use Iphoto. Does anybody know if there is a way to use the same photo directory and library using Iphoto as well as Aperture? I don't want to duplicate all my pho
-
#ERR:75-Path/File access error
Hi folks, Trying to build a report using the EVDRE data grid and upon dragging & dropping the object to the report display area, this error message "#ERR:75-Path/File access error" is showing up. Please can anyone provide an explanation for this.
-
Database Ver. 11gR2 (11.2.0.2.0) Hi Guys, How do you run jobs in oracle scheduler based on events? I have a job that needs to run after the successful completion of another job. I don't want to use chains. I have searched on the web, but all the exam