Since I installed 7.6, my IPod (5th Gen) can't find my games

EVERYTHING was fine until I installed 7.6. After doing so I had to restore my IPod 4 times, and now the $30 worth of games that I once had on there, cannot be found. They're in/on my computer, and they're in my ITunes Library but it says that my "games cannot be found." I found them, and they were once there on my IPod (5th generation 30GB), but not they won't sync up somehow. I tried the draggin them out of the library onto my desktop, then dragging them to the devices section to my IPod, still doesn't work.
Has this happened to anyone else? Anyone have any suggestions?

I am running Windows XP with a 5th generation Ipod and have had similar issues. (itunes would not sync games to ipod; Received error stating games could not be found yet they were in the Games Folder of iTunes Library.) I followed the itunes trouble shooting procedures and did not resolve my problem. I discussed this with itunes tech support for over a week and got no where.
I have been monitoring this message board and have yet to find a solution.
Keep us informed regarding your progress.

Similar Messages

  • IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

    I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
    My battery then ran out, and my iPod was dead for two days.
    My iPod charging cable wasn't working, so i went out to buy a new one.
    After charging it with the new cable, it would not connect to the internet.
    My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
    I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
    Is there any way to fix this?

    If not this
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • After I installed iOS 7.1, my iPhone 4s and iPod (5th Gen.) will no longer sync with my 2014 Toyota Tundra Truck.

    After I installed iOS 7.1, my iPhone 4s and iPod (5th Gen) stopped syncing with my 2014 Toyota Tundra Truck.  Has anybody experienced this problem?

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • HT3204 I can't download apps to my ipod 5th gen - ever since I updated to the ios7.4 :(  Please help!

    Hi ~ 
    I recently upgraded to the ios 7.04 and ever since I am unable to download apps to my ipod (5th gen).
    The new apps show up in my itunes library but they will not download onto my ipod.
    I feel as though I have tried everything.
    Please help with whatever tips you may have for me!
    Thank you!

    I had to do a quick check, thanks! Here are a few I think should be working:
    Temple Run
    Sunday Lawn
    Where's my Water
    Dora Dress up
    Dora ABC
    Spy Mouse
    Super Why
    Spongebob Marbles
    Some other apps say iOS 4+ but don't list the iPod Touch 2nd gen in the description, so I'm guessing they just don't work no matter the OS. However, the apps listed above say OS 3+ and just say ipod touch, so I think they should work. I'm running iTunes 10.3 but not the most recent release, and am updating as I type just in case that's the problem. Thanks for any help or advice!

  • Is it possible to install a 160 GB Toshiba slim-fit HDD from an iPod Classic 2009 model into a iPod 5th Gen Late-2006 model that originally had a 30 GB Toshiba drive?

    Is it possible to install a 160 GB Toshiba slim-fit HDD from an iPod Classic 2009 model into a iPod 5th Gen Late-2006 model that originally had a 30 GB Toshiba drive?
    I have had my 30 GB iPod video for about 7 years, it was a gift and has served me well. Unfortunately it was in my pocket when I brushed up against a very powerful magnet which latched onto the unit and scrambled the hardware. Sad iPod icon.
    I was told I probably need to replace the HD in order to get it back to working order. What I am wondering is, would I be able to replace it with a larger capacity drive so long as I got a unit that was slim enough to fit into the casing?

    Have you tried resetting the PRAM? http://gigaom.com/2011/07/26/when-to-reset-your-macs-pram-and-smc/
    Which Windows version are you trying to install? If I remember right, you can't use windows 8 on these older machines.
    Other than that it's hard to say what could have gone wrong. I can only suggest going through the steps again carefully and making sure everything worked the way it should.
    Have a look at this article too for a slighly more verbose instruction on making a drive bootable: http://www.instructables.com/id/Install-Windows-7-without-USB-or-DVD-without-upg ra/

  • Since the iPod Lightning connection is not supported, how can you take videos from your iPod 5th Gen to your tv?

    Since the iPod Lightning connection is not supported, how can you take videos from your iPod 5th Gen to your tv?

    Lightning TV out
    - Via Airplay to an Apple TV.
    or one of these cables.
    - http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
    - http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a

  • If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

    if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
    The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
    it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
    and i hope you understand my problem..
    i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
    -sierra

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • How to disable a ipod 5th gen and how to get the passcode ?

    I just bought ant ipod 5th gen from Americans store but it was a display when I got ready to set it up it don't let me go pass the disable  connect to iTunes screen. I try restoring it but it don't let me it takes about 1 hour to load and then it gets to the same screen it asks me to enter the passcode on the ipod and then continue with the restoring but I can't enter the passcode sense it won't let me go more then the disable connect to iTunes screen. Plz help me.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    You may have to:L
    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • HT201246 what shall i do if i forgot my ipod 5th gen password and i cannot connect it to a computer???????

    what shall i do if i forgot my ipod 5th gen password and i cannot connect it to a computer???????
    ALSO THIS IS THE FIRST TIME SWITCHING ON MY IPOD IN 5 MONTHS

    If no computer:
    Only if:
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Otherwise you need a computer with iTunes and an internet connection
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Kenwood X991 & iP200 cable with iPod 5th Gen 80GB does NOT work correctly

    I have a conundrum. My wife has the 4th Gen v1.2.1 iPod 30GB which works fine on my Kenwood X991 Head Unit. I recently purchased the "new" 80GB iPod 5th Gen with the latest version "1.0.2" which does NOT work properly. The iTunes software tells me that this 1.0.2 is the latest software.
    When I attach my iPod to my stereo, it states "Reading" for eternity. It DOES play music but only plays Alphabetical Order ONLY. There is no ability to stop, change, fast-forward, reverse, etc....the only thing you can do is click "Source" to change to CD Player or Tuner, etc...
    Does anybody out there know what is going on? I have a request into Kenwood as well. Thanks in advance for all your help!
    -Kingofbytes

    Thanks for the help. It's an iPod Classic then 80GB. The unit plays when plugged in but does not allow searching, or switching songs nor displays as it is supposed to. My wife's 30GB works with no problems. Of note:
    Her 30GB = v1.2.1
    My 80GB = 1.0.2
    Mine is newer by about 6 months. Both are the latest software according to the screen.
    Kenwood has said to "reset the head unit" and "make sure I've got it plugged in properly". I need to try the reset part next but the last statement is funny to me. I can install a head unit, amplifier, re-run all speaker wire, install a Dual 10" subwoofer box, solder and wire tie all connections from a factory unit to a 3rd party Cable manager kit, but I need to "make sure" I know how to plug in an iPod cable.....laughable.

  • My ipod 5th gen wont let me download apps on the app store. im on ios7 and signed in

    my ipod 5th gen wont download any apps from the app store. i am signed in. whenever i tap 'free' and then 'install' it comes up with a round loading sign but does not ask me for my apple id i cant update apps either. please help.

    iOS 7: Common Problems Users Have and How to Fix Them | Digital Trends

  • I had put a greek keybooard up on my Ipod 5th gen, then changed my password to a greek word, yesterday I took the greek keyboard off and didn't change my password, so I now can't get into my Ipod. If any one could help me that would be grea

    I have an Ipod 5th gen, I added a keyboard which was greek, I had changed my password to a greek short sentence. But the decided to take the greek keyboard off as I didn't use it often, so there was no point in having it. But I forgot to change my password, so I can't enter my Ipod. I've tried to enter the password in English and its not working! I don't really want to restart it all because I will loose everything! If anyone could help that would be great thank you.

    Connect the iOS device to your computer and try to make a backup. Yo shld be able to make a backup if you previously syncing to this computer.
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I can't sync playlists from my iPod 5th gen to my iTunes library on new laptop

    I have a new laptop and have managed to move all my music to it and install iTunes and all the albums are correct and present, but it was a bit complicated. I'm not sure if we missed a step in moving everything via a larger hard drive, but my playlists were not transferred and even though my iTunes recognises my iPod 5th gen it won't actually sync. I have run the diagnostic test, it says it's all fine. It won't sync new purchases and I can't copy playlists from my iPod back into the iTunes library. I have 15 playlists and I don't want to do it all over again. Does anyone have any ideas?
    Anyone have any ideas?

    I did find that if I bought new songs from iTunes that I could transfer them to playlists on my iPod, but otherwise when I connect the iPod, under settings (on the left under the device icon) if I select music, it brings up the tick box for sync music. If I try to tick that box, it asks if I am sure if I want to remove existing music and sync with this iTunes library.

  • I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working.

    I've had my iPod 5th gen for a few months now and out of nowhere the microphone has stopped working. It won't pick up anything, I can't use it for recording, face time, siri or anything else. Every time I try and record and play it back its just all fuzzy, is there anyway of fixing it without having to send it off for repair?

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the tope edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                 
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       
    You can also send it to Apple.

Maybe you are looking for

  • Dv4-1308ca Sound Card?

    What type of sound card does this model have? Does it support 5.1 speaker setup? Any replies would be appreciated.

  • FM for Creation of manager (Chief)

    Hi Anyone know how I can create a manager of an org unit programmatically?  I wish to create an A012 relationship in response to a portal request. Regards Ian

  • Print in Oracle BI EE Answers

    When I answer a report it shows me the first e.g. 25 rows, as defined. When I print this report it will print also this 25 rows :-( I'd like to force Oracle BI EE that it will print in any case the complete report. Is this possible? How can I set thi

  • My browser keeps telling me to upgrade to the lastest version, but I am already using the latest version??

    I have tried removing firefox and reinstalling but the problem persists.

  • Sales Order Ack

    Hi All: I am using transaction VA02 and using that i am sending the email for order acknowledgment. Here i would like to know the way to get the email address that we are giving in the communication methods tab. Here we go... Extras -> Output -> Head