Since I installed iOS7, during calls my cheek interferes with the touch screen

since I installed iOS7, during calls my cheek interferes with the touch screen, switching on FaceTime or speakerphone

That is the bug, exactly. Phone rings, slide to answer, raise to ear to use as a telephone!
Getting infuriating. "Reset All Settings" worked for over a week for me, then problem returned.
Have submitted 3 bug reports to http://www.apple.com/feedback/iphone

Similar Messages

  • Has anyone had issues with the touch screen acting very weird since updating to ios7?

    Since I updated my 4S to iOS 7, the touch screen has great latencies and I can press something in one part of the screen and it activates something in another. The problem is even worse if the phone is plugged into power.
    Is there some way to go back to iOS 6? This makes my phone almost useless.

    Apple does not support iOS downgrades.
    Have you tried a reset?
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
    You can also try a settings reset.
    Settings > General > Reset > Reset All Settings
    You will not lose any data but it will reset the settings in your Settings app.

  • HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

    IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
    It might have happened when I was accessing my camera bypassing the lock screen!
    All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

    I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

  • Ever since I installed IOS7, my Iphone 5 has always opened with a message that I have given an incorrect voicemail password.   I have never put in a voicemail password, so I cannot get into the site to correct this.   Any suggestions?

    Ever since I installed IOS7, my Iphone 5 (10 months old) has always opened with a message that my voicemail password is incorrect.    But I've never at any time put in a voicemail password, so I can't get into the site to put this right, and it didn't happen before I installed IOS7.  The message goes away as soon as I cancel it, but it's very irritating.  Any suggestions?

    Call your carrier & have them reset your voicemail, then set things up again. Most carriers require a password for voicemail.

  • My Iphone has been slowly breaking every since I installed Ios7?

    I have experienced a variety of problems with my Iphone 4S ever since installing the new ios7. My Iphone is only about 14 months old, and I have not had any problems with it up until the update. I love Apple products, and installed to updates on all of my devices and my families - but I think I got the short end of the stick!! The first sign was my battery life, it would not last for more than 6 hours, and that was just when it was in my bag, not really being used. I looked it up online, and saw others had noted a similar problem. I dismissed it as being down to the new, fancy Ios needing more battery life, and the fact my iphone was now over a year old. Then, in the past 4 weeks my wifi has not been connecting, and when it does, it will only stay connected for a short period of time - my data bill from my carrier was obviously very expensive!!
    I started talking to customer support on the live chat feature for Apple and it was actually really helpful and quick! After running diagnostics they advised they would restore my iphone to factory defaults to check whether the problems I was having was due to hardware or software problems. I hadn't backed-up important pictures etc, so asked if I could get back to them or do it myself.
    Finally, today I clicked to open a text message and it just froze. I decided to plug it into the mains charger to see if it kick started it back to life but nope, nothing. So I tried connecting to my laptop. Nope! It made the noise to acknowledge it but it didnt do anything on screen or anything. So I clicked restore and decided I'd just have to follow Apples advise and restore.
    This is where I got REALLY angry.
    The restore did not work. It got 3 quarters of the way through and failed. An error message advised it was 'Error 29.' Which if you research that error number, its to do with Ios7. So now I've got an utterly useless Iphone 4s which is telling me to connect to itunes, but then when I do it doesn't work!!
    I am now led to believe that Apple will not replace my Iphone as it is over 12 months old.
    I am outraged and would seriously advised anyone to not update any Apple updates, or infact seriously contemplate purchasing any new Apple products.
    If anyone has any suggestions about how to fix my Iphone that would be great? In an ideal world, Apple would replace my phone that they have now effectively broken.

    According to this support document http://support.apple.com/kb/TS3694 which describes the error codes from restore errors, it does not say anywhere in there that it has anything to do with iOS 7, it has to do with security software and anti-virus software on the computer.
    Do you have the latest version of iTunes on your computer? What computer OS are you using? If you have anti-virus software on the computer, what is it? If you are using a windows computer, follow the link in the information below to temporarily disable your firewall/anti-virus software to attempt the restore again.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • I have the ESPN ScoreCenter app on my iPhone 4S and since I installed iOS7 I am no longer receiving alerts for my teams.  I have not changed anything else, Notifications is on all my team alerts are on.

    I have the ESPN ScoreCenter app on my iPhone 4S and since I installed iOS7 I am no longer receiving alerts for my teams.  I have not changed anything else, Notifications is on, all my team alerts are on.

    Wow, just posting and it seems that there is a solution that is working for me...
    What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

  • Since I installed IOS7, I can't send emails, but I can receive them. How can I sort this out?

    Since I installed IOS7, I can't send emails any longer, but I can receive them. How can I sort this out?

    See here: https://discussions.apple.com/message/19748463#19748463

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • Since I installed Lion, I can't get online with ichat - shows ichat as offline or disconnected when I open the app.

    Since I installed Lion, I can't get online with ichat - shows ichat as offline or disconnected when I open the app.

    Hi,
    Also try turning Off Face Time
    Open Face Time
    Go to the Preferences
    Set it to Off.
    Also make sure your router has the Time and Date/Time Zone set as this upsets Face Time which in turn upsets IChat
    9:28 PM      Tuesday; August 16, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Since i instaled ios 6 , i send a message with my iphone and i receive in my ipad. what is happening?

    since i instaled ios 6 , i send a message with my iphone and i receive in my ipad. what is happening?

    Sounds like it is using your Apple ID / Associated Emails to receive the iMessage. This means that the person who is replying is making it go to your email address. Make sure that the person you are sending the iMessage to has an iPhone as well. I don't remember if other iOS devices can send iMessages to a mobile phone number.

  • Since upgrading to ios7 I have intermittent wifi problems with ipad2

    since upgrading to ios7 I have intermittent wifi problems with ipad2

    You need a larger internal drive and you definitely need to uninstall any Avast product, using the instructions at the developer's website. A 120GB SSD with only 9.6GB free just isn't going to cut it - you need at least 9GB in free space just to run Mavericks and many people suggest that 10-15% of your disk (particularly on a SSD) should be free space.
    Good luck,
    Clinton

  • Error when calling a popup window in the initial screen of an application

    Hi,
        I am calling a popup window in the Initial screen to select the variant list.
    I am getting an error reference to Null Object reference.
    Here is the Error.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          15.06.2007 10:00:16
    Short text
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
    "SUPPLY_VIEW_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
    the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
    Looking for Ur valuable suggestions.
    Cheers,
    Sam

    Hi Sam,
    The correct code for creating a popup window will be:
      data lo_window_manager type ref to if_wd_window_manager.
      data lo_api_component  type ref to if_wd_component.
      data lo_window         type ref to if_wd_window.
      lo_api_component  = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
      lo_window         = lo_window_manager->create_window(
                         window_name            = 'WINDOW_NAME'
    *                    title                  =
    *                    close_in_any_case      = abap_true
                         message_display_mode   = if_wd_window=>co_msg_display_mode_selected
    *                    close_button           = abap_true
                         button_kind            = if_wd_window=>co_buttons_okcancel
                         message_type           = if_wd_window=>co_msg_type_none
                         default_button         = if_wd_window=>co_button_ok
      lo_window->open( ).
    Hope this helps.
    Regards,
    Ram

  • DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

    Hi,
    SRM 7.0 contains 2 clients:
    Sender: 100 for EBP, logical system is CLNT100
    Receiver: 200 for SUS, logical system is CLNT200
    both the clients are connected through PI 7.0, logical system of PI is CLNT001.
    From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
    In PI also msg is processed.
    But in SUS200, it is showing below error msg:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
      <SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
      <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Pls help in resolving the same....
    tnx n rgds,
    balu

    Hi,
    How did you solve the issue? Can you please provide the solution.
    Thanks,
    -Devi Swain

  • When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    Try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

    Hello,everyone!
    My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIProxy</SAP:Category>
    <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
    <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
    <SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
    <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Detialed error from SXMB_MONI,
    Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
    This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
    I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
    Regards,
    Baskaran K

    HI,
    This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
    We have one more error message
    <FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
    Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
    Regards,
    Baskaran K

Maybe you are looking for