Since I installed Lion I get the message "The disc can't be burned, because the device failed to calibrate the laser power level for this media " when I try to burn a DVD.

Is this just a coincidence with a drive failure or is it a problem with Lion?

Try a different DVD or try a commercial laser head cleaner Disc

Similar Messages

  • Iam getting the following message when i try and burn a dvd using my mac The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
    Can anyone help
    Thanks

    Unfortunately your drive has *probably* failed. You can try a cleaning disc, sometimes thst can help. First though try resetting the smc and pram.
    To reset the smc on Desktop Macs
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
    So, I tried the iDVD and got the same error message.
    Can anyone out there help me? I've tried both a DVD - R, and a CD.
    I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
    Peace, Pyxidis

    I have had that same problem, but it was unrelated to any upgrade.
    In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
    It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
    Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

  • How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

    First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

  • I am getting this message when trying to burn a cd: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

    I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.

    Look here:
    Burner - device failed to calibrate the laser power level for this media.

  • Been trying to burn a movie onto DVD and get this "The disc can't be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

    Been trying to burn a movie onto DVD and get this "The disc can’t be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

    It generally means that the media is faulty or of poor quality. Most of us here use Verbatim, Maxell or Taiyo Yuden media.
    OR
    Your Superdrive may need a clean.
    If you have further questions please state what Mac, with what versions of OS X, iMovie and iDVD you are using.

  • When i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

    when i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

    when i insert a blank DVD, appear a message "The disc can't be burned, Because the device failed to calibrate the laser power level for this media."

  • Burner - device failed to calibrate the laser power level for this media.

    The burn to the MATSHITA DVD-R UJ-845E drive failed. The device failed to calibrate the laser power level for this media.
    Huh?? Have no idea what this means, after a forum search am more confused... I don't think I've installed any software that has effected it (suggested in other discussions) The only other one that might have been useful was archived and I couldn't work out how to read all the threads so if anyone can help with this error message that would be awesome.

    I just wanted to share my experience with this issue:
    Early 2008 Mac Pro with two 16x SuperDrives (Sony NEC Optiarc 7170A). BOTH SuperDrives stopped working properly at the same time. After a few months of burning only CDs, I suddenly found myself unable to burn DVDs.
    I could read and write CDs, but I could only read, not write, DVDs. Attempts to burn DVDs gave the dreaded "could not calibrate laser for this media" message in Finder, Disk Utility, and Burn. (console Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.)
    The fact that both SuperDrives went bad at the same time made me think that it had to be either the media or a software/firmware glitch.
    I tried Memorex, TDK, and Verbatim media; neither would write. I tried canned air, a DVD-cleaning-disc kit, resetting SMC and PRAM (which of course involved rebooting), the International pref pane trick, even tried flashing the drive firmware with new and old firmware revisions. My last resort was to install Snow Leopard on a blank partition; I still got the same error message when trying to burn a DVD from the brand new, fresh OS install.
    It seemed ridiculous to have a $3,000 machine unable to burn DVDs, so I ended up purchasing two new SuperDrives from MacSales/OWC. (Apple Original Pioneer DVR-112D-BK Internal [Black Bezel] 'SuperDrive' up to 16X DVD+/-R, up to 8X DVD+/-RW, Up to 8X Dual Layer +/-R DL, up to 32X CDR/RW Burner.) These were available to ship the same day for $34/ea.
    I just received them; it took only 15 minutes to swap out the old drives with the new ones. They work perfectly, on all my media.
    I suppose $70 for two new drives is more than worth the frustration of trying to resolve this problem by other means. I hope my experience can help others with this same issue.

  • "failed to calibrate the laser power level for this media"

    I was trying to duplicate/backup my Tiger DVD using the Disk Utility app and got this error message: "Unable to burn - the device failed to calibrate the laser power level for this media"
    What does that mean?
    G4 17" Powerbook 1GHz.

    does it do it with all media? Have you tried different brands, DVD-R, DVD+R, DVD+RW, etc.?
    When I had this same problem, the fix was sending my laptop in to Apple and getting the drive replaced.

  • Failed calibrate the laser power level for this media??

    I have very new imac 24inch. I tried burning a file to a memorex dvd-r and I got this message: "This disc cant be burned because the device failed to calibrate the laser power level for this media."

    Hmm. I tried something else and it worked. At first I followed the tutorial at the apple web site found here:http://support.apple.com/kb/HT1479 which prompted the error.
    This time instead of dragging and dropping, I located the file itself in Finder and went to File > Burn this file onto .... and it burned without the scary looking error.
    The problem with the tutorial I think is that when you drag the file and drop it into the dvd folder it drops an alias, not the file itself?

  • Disk cant be burned because my laptop failed to calibrate the laser power level for this media

    Tries to burn some files onto a CD-RW and I got this error message. The disk cant be burned because my device failed to calibrate the laser power level for the media

    Hi David,
    Mac SuperDrives are notoriously picky about the discs they'll play nicely with. Looks like your's is one of those. FWIW, I've had many more problems with RW discs than regular ones. I'd try another brand of regular disc.

  • Mac OS X 10.6.8; iPhoto- photos  to 'burn folder'; press 'burn' symbol. This window appears: 'Burn - The disc can't be burned, bcause the device failed to calibrate the laser power level for this media'; what to do next to address this?-

    have Mac OS X 10.6.8; Put a few iPhoto-photos  to 'burn folder'; press 'burn' symbol. This window appears: 'Burn - The disc can't be burned, bcause the device failed to calibrate the laser power level for this media'; what to do next to address this?-

    That's a hardware issue and I'd ask on the forum for whatever Mac you have.

  • The device failed to calibrat the laser power level for this media

    Hi,
    Does anyone knows what this means:
    "the device failed to calibrat the laser power level for this media"
    And, any selutions for it?
    Thinks.
    Ed

    Pure voodoo, but heck, it's worth a try!
    Just to simplify:
    Open System Preferences.
    Click on "International"
    Under "Languages": Drag any of the other languages to the top,
    then drag English back to the top.
    Set "Order for sorted lists" to English
    Set "Word Break" to English (United States, computer)
    Close System Preferences
    Restart computer
    Thanks Greg!

  • I cannot burn pics or text.  I keep getting the error message "device failed to calibrate the laser power level for this media"

    I get the following error message whenever I try to burn anything...!..any solutions?  Thank you.

    When you put in a disk to burn, the burner performs a test burn on a spot of the DVD where data doesn't get placed. This lets the optical burner and computer determine what kind of disc you've given it. The error message is most likely to occur when there's a mechanical problem with the burner or when you have bad data.
    I used to work for an Apple reseller and in any week we'd have a couple people bring in their Macs thinking their optical drives were damaged when they really just had bad media. Most people don't realize that CD and DVD media can go bad with age so it wasn't at all uncommon for people to say, "I burned a disc last month just fine." And I'd stick a DVD from our stock into the computer and burn one just fine too. Problem solved for a lot less than the cost of a new burner.
    BTW, if you are in a dusty environment or there's a smoker in the house you might also have a dirty lens so a lens cleaning kit wouldn't be a bad investment either.

  • Error messages: The disc can't be burned because an unexpected error occurred (error code 0x8002006E). The disc can't be burned because the device failed to calibrate the laser power level for this media.

    October 13, 2014
    After reading the 10 pages of the Apple link and trying almost everything except adding a new account in the System Preferences, I went to Staples and bought a new box of Staples brand DVD+Rs and came home and tried them and they worked fine. I also changed the System Preferences for CDs and DVDs to just "Open Finder" instead of "Ask What to Do" - so I now bypass that dialogue box because I noticed when I burned a CD I never got that question and had NO TROUBLE burning a CD throughout this entire process. And now I seem to have no problem burning DVDs either....
    The DVDs I bought were only 4X (burn speed) - kinda low number but that was also mentioned above. Whatever, after several days trying to figure out why I could burn CDs but not DVDs, my problem seems to be solved.

    Good work, thanks for the report!

Maybe you are looking for

  • Jiggle mode in Lion

    In Jiggle Mode (within Launchpad) should I have an "x" on the app icons to remove them if I want to?  Currently there's one app that always has an x, it's Caffeine, but no others ever do. 

  • Checking print job status

    Hi, In Leopard, when I print to any of my printers, an application with the name of the printer I'm printing to appears. If I want to check on the status of the current print job, I can't figure out a straightforward way to look at the jobs in that p

  • Easy Cost Planning at Network Level

    Hi All, I was able to implement ECP at WBS level, but not able to implement at network level. I am using SAP ECC 6.0 EHP 4. I have activated the business function ops_ps_ci_1 and also activated the 'Activate Planning for Network Activities with Easy

  • Statistical forecast varies in back ground and foreground !

    Hello friends, When i generate the Statistical forecast at *product and plant* level in foreground it gives some values, then generate in background  at *product and plant level* again it gives different values.Could you pl through me some lights on

  • Anyone created an apex session in a plsql procedure in 4.1

    Hi all, Was wondering if anyone has been able to create a procedure that creates an apex session that allows using collections after upgrading to 4.1 Our procedure which we used for nightly processing worked fine in 4.0.1 is no longer working after u