Since I installed Lion machine won't power down all the way

When I go to close down, I use the Apple icon or the power button, but neither will shut the machine down.  I have to press and hold the power button until it turns off.  It started doing this after I installed Lion.
Any help with this?

Don't use the power button. Use the Apple menu Shutdown. At this point boot while holding down the command-r keys which should boot you into the Lion restore disk. From there use Disk Utility to Repair Disk.

Similar Messages

  • Blade 1000 won't power on all the way

    The tab for the interlock switch was broken and I fixed that with some duct tape, but now the blade 1000 will not power on all the way - does not even get to an OK prompt. When I push the power button the fans come on and the drive starts to spin, there is a low beep after that then nothing - nothing on the monitor. I tried connecting with a serial monitor and still saw nothing. I replaced the motherboard and the power supply but still nothing.
    Could it be the cpu's?

    Go get the system documentation at Docs.Sun.Com
    [http://docs.sun.com/app/docs/prod/blade1000.ws?l=en&a=view|http://docs.sun.com/app/docs/prod/blade1000.ws?l=en&a=view]
    The Service manual is there for the SunBlade1000
    (and SunBlade2000 which is essentially the same system except for chassis color and cpu speed).
    The PSU slides into the chassis and plugs into a power distribution board (PBD).
    That power distribution board then further passes power to wherever it needs to go.
    There are various wires and cables that need to be connected to the PDB.
    You may have to dissasemble the entire computer and rebuild it so as to know that everything is connected as it should be.

  • Imac g4 won't shut down all the way

    Recently installed OS X Tiger. When I shut down the computer all the icons and the dock on the desktop go away, but the computer doesn't completely shut off. Any ideas? Anyone? Thanks!

    Hello bad dad:
    Welcome to Apple discussions.
    I would run the hardware tester that came with your computer to see if it detects any problem.
    I would also run repair disk from your software install DVD.
    I would then (if the above do not "fix" anything) probably do an archive and install to eliminate software issues that may have occurred when you installed OS X:
    http://docs.info.apple.com/article.html?artnum=107120
    Barry

  • When playing games in Mindjolt games on facebook, I am unable to scoll down to see scores of other players, the scroll bar won't go down all the way.

    Don't know what else to say, that pretty much sums it up.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Firefox won't close down all the way after watching a video. I exit out, and the sound continues. When I try to re-open firefox, I get a message about how I have to restart my computer. How do I fix this?

    Basically whenever I watch a video and I exit out of the video I have to restart my computer to get Firefox back open. If I exit out or go to a new page while the video is playing, the audio continues like nothing has happened. I've checked my task manager and it shows that Firefox is closed. When I try to re-open Firefox I get an error message that tells me Firefox is running but is unresponsive and I have to restart my computer. How do I get it to stop doing this?

    Try holding control, alt and delete down in succession and then a dialogue box will appear with windows task manager. Once open click on the Processes Tab and look for firefox.exe. Highlight this and then click end process. It should come up with a warning but just click Yes. This should then close firefox and allow you to reopen it from your desktop without shutting down your computer. Hope this helps.

  • My iPod Classic's volume won't go down all the way.

    I listen to my iPod while going to sleep. Because the room is completely silent (and I suppose my hearing is sensitive) I like the volume very low for that. I've recently replace my very old iPod with a new iPod classic. On my old one I could turn the volume down until it was completely silent, but that doens't seem to happen on this one. The minimum volume on it is far louder than I'd like when a room is silent. I can't find any settings etc that would change it.
    Is that volume normal on new iPods or does this mean something's wrong with it? Is there anything I could do to make it go any quieter?

    It seems that this is an issue with the newer iPod Classic models.  I haven't seen a solution or "fix" for this issue unfortunately.
    B-rock

  • Macbook won't turn on all the way.  Please help.

    Macbook won't turn on all the way.  At first it only showed the grey apple logo, but now it says that I need to restart the computer by holding down the power button for several seconds or pressing the restart button.  I tried this already but it's not doing anything.  Please help. 

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My brand new MacBook Air won't turn on all the way.

    Hi my brand new MacBook Air won't turn on all the way. If I try to restart it or shut it down, it will go like it is starting up, but goes to a gray screen and stays there. I can see the mouse and move it, but it won't turn all the way on. What is wrong with it? It had been working fine since I got it, but today it hasn't been.

    You may have to see if troubleshooting this issue can help, though the instructions on a process of elimination by symptoms are tedious in the following support article, and are suggested to be performed ahead of trying the process described in the title.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    For the actual SMC reset, note subsection in above, instructions click-open on blue text:
    >Resetting the SMC on portables with a battery you should not remove on your own
    If the computer does not shut down, and just hangs there, try pressing the power button down for 15 seconds. Check the suggestions in the above article to see if any of them can be used, if the computer will power-up.
    There is another item that sometimes can help, but the main issue you say could be resolved by the SMC reset; this other thing is involved NVRAM (non-volatile random access memory) so here's an article about it.
    •About NVRAM and PRAM:
    http://support.apple.com/kb/HT1379
    >Resetting NVRAM/PRAM opens in above, click-to-see instructions on how to reset.
    You may have to call ahead to the nearest Apple Store for an appointment to see a Genius; or at authorized reseller, their service product specialist who should be trained to understand how to proceed, just in case there is a hardware issue behind the symptoms. When you call, be sure to have the serial number and purchase date available, when you call an official store.
    Or use the 'Apple - Support - Contact Apple Support' to start the process...
    http://www.apple.com/support/contact/
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • Ear phone jack won't go in all the way

    My earphone jack won't go in all the way.  I've tried cleaning the hole with compressed air, and a Q-tip with rubbing alchol.  Nothing seems to be working.  Plus, my ipod is showing the headphones are plugged in, so I can't even listen to anything with the speakers.

    Try looking inside the jack It appears something is stuck inside. Look at your headphones plugs. Maybe the tip broke off.
    I would make an appointment at the Genius Bar of an Apple store before try the below since you may cause further damage
      Apple Retail Store - Genius Bar 
    See:
    Broken headphone jack! 3.5mm dillemma....: Apple Support Communities
    How do I remove 3.5  tip of a headphone...: Apple Support Communities

  • HT4528 I just got a replacement iPhone 4s and i let the battery run down all the way before charging it and now that i have put it on the charger it won't turn back on or show any signs that it is charging. its just a black screen. how do i fix it

    just got a replacement iPhone 4s and i let the battery run down all the way before charging it and now that i have put it on the charger it won't turn back on or show any signs that it is charging. its just a black screen. how do i fix it

    Keep iPhone on wall charger for ten minutes, it may turn ON itself. If still nothing, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to respond.

  • Charger won't connect in all the way.

    Hey, I have a fifth generation ipod touch. The charger won't connect in all the way. Plus it won't charge at all. I don't remember doing anything to it at all. My dad is usually the one that charges it for me in the morning. Do you think he put the usb the wrong way and forced it. I'm not sure why it's like this. I had a warranty thing. I never filled it out is it to late? I just got this about a few months ago.

    Plug into what?
    The iPod? The Ligntning connector plugs into theiPod ither way.
    A USB port?

  • Earbuds won't plug in all the way

    No sound because my earbuds won't plug in all the way. I was able to plug in an audio splitter and use the earbuds but can't get just the earbuds to work by themselves

    If you have already tried pushing the headphone in as hard as you can until the white part touches the iPod Nano and you hear a click, take it in to your local Apple Store or AASP.

  • My headphones won't plug in all the way

    My headphones of my 6th gen. nano won't plug in all the way.  They will slide a little and then the sound will stop coming through my headphones, even when they are plugged in all the way I'm not getting all of the sound in the songs, any ideas, is it my nano or are all of them like this?

    If you have already tried pushing the headphone in as hard as you can until the white part touches the iPod Nano and you hear a click, take it in to your local Apple Store or AASP.

  • IBook won't start up all the way...

    My iBook G4 has been great. But recently, I've experience a little trouble. Sometimes when it starts up, it seems to only startup part way.
    Meaning, that none of my external connections work (iBook won't recognize any of my USB periferals like my printer and external mouse... and unfortunately my wireless internet connection is supported through a USB port, so when this happens, I can't log on to the internet!).
    I've also noticed that when this happens, although I get my Mac OSX desktop, I don't see anything on the top-right-hand-side of the menu bar. So I do get my "apple" menu, and Finder, File, Edit, View, Go, Window, and Help on the left-hand-side, but nothing on the right (display control panel, volume indicator, Date/Time).
    So, sometimes I start it and it starts up all the way and everything works fine. Other times I start it up, and I can't find my periferals, and I don't have anything on the right-hand sinde of the menu bar.
    I have tried troubleshooting on my own by running Disk First Aid (everything checks out okay), and verifying and repairing my permissions. Doesn't help.
    Any suggestions? Hopefully I can get some useful advice on this discussion board. If not, I will have to take it in for service.
    iBook Power PC G4 933 MHz   Mac OS X (10.3.9)  

    Hi mac824,
    It sounds like some system corruption.
    Download and reinstall the 10.3.9 Combined update. If that doesn't correct it, an Archive and Install should.

  • G5 won't start up all the way with new monitor

    My employer was getting rid of two 22" Viewsonic CRTs, so I figured I'd use one to upgrade my 19" monitor that's connected to my dual 1.8 G5.
    When I connect either of the 22" monitors, the G5 won't startup all the way. It just hangs (although the mouse is movable) before the desktop appears.
    Both monitors are operational and work fine when connected (via a VGA adaptor) to my macbook pro.
    The G5 works totally fine when connected to my old 19" monitor.
    Here's what I've tried:
    • zapped the PRAM (numerous times)
    • plugged the 22" monitor into a different AC outlet (in case it was sucking too much power to allow the G5 to boot fully)
    • swapped the video card in the G5 with an identical one from the same model G5 at work.
    Nothing helped. This is really perplexing. Why would the monitor keep the computer from fully booting?
    thanks!

    Might give a try with Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    As long as you don't have a USB connection in tandem with a Universal Power Supply, which can cause problems. Unplug the USB cable if you do.

Maybe you are looking for

  • I get an error message installing IOS 8.1.1.

    This software update downloads but gives an error message when installing.

  • 2nd gen time capsule and airport express g

    Ive looked high and low but none of the discussions have worked for me. this is what I have. a 2nd gen time capsule running my network of timewarner modem. I just got airport express g older model and I want to use it as a ethernet bridge for my Deno

  • HELP WITH ZEN MICRO PLAYL

    HELLO, I JUST PURCHASED MY ZEN MICRO MEDIA PLAYER AND DOWNLOAD MY MUSIC TO IT. WHEN I PICKED OUT A SONG TO START A PLAYLIST I NAMED THE NEW PLAYLIST AND THEN WHEN I WENT TO THE MAIN MENU TO ACCESS MY PLAYLIST IT LIST ALL MY SONGS. I AM NEW HERE AM I

  • MRBR - Price Variance

    Hi All, I have created one purchase order and did invoice also and is already paid. But in MRBR tcode , this document is blocked under price variance. Please let me know why it is blocked due to price variance as invoice is already paid. Do the needf

  • No Apple intermediate codec found

    I had to uninstall FCE4. When I reinstalled it, I get the error message "codec not found".  I had deleted the Apple Intermediate Codec when I uninstalled the program. I tried to "move it" back (using the one from Time Machine), but that isn't working