Since I installed the latest update, my computer occasionally tells me it is still logged on whenit is not. I have to restart to clear. How do I fix this.

When I am logged onto to Firefox - I sign off. After a minute or two, I try to log on again - it tells me it is already running (it is not) which I confirm by looking at "all programs" (which does not show it running). The amount of wait between signing off and trying to sign on again does not effect ability to log on. The only way to be able to sign back onto Firefox is to "restart".

I think you are getting your terms mixed up. Logging on/off is when
you access a web page, or starting the computer. Are you trying to
say after shutting down Firefox, it won't restart?
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

Similar Messages

  • I don't have access to Google Images Search since I installed the latest update for https everywhere (today)

    I have installed the https everywhere add-on a while ago.
    Since I've done this I've never been able to click on images each time I was doing a Google search from their first page of results ("search everything"), but I could still find images by going directly to Google Images search.
    Since I installed the latest update for https everywhere this morning, I simply cannot search a single image with Google, which is a problem as I'm a professional art historian.
    I get the message"Your search - rembrandt - could not be completed with the requested search options. Reset search tools".
    But resetting the search tools don't change anything. I'm working on a Mac, if it helps.

    I had the same problem although it was a previous update rather than this one that caused the problem. Just hadn't got round to doing something about it - was using Bing images instead.
    I searched for some answers this morning and seemed like most suggestions were a nuisance to try. Couldn't find 'Preferences button of HTTPS-Everywhere' as suggested above. Decided to check if No Script was blocking it. Sure enough. So problem is solved.
    Thought I'd put it out there in case it helps someone else. Appreciate that people are so helpful on here.

  • IIS Crashes since I installed the latest updates

    Updated Windows 2012 r2 this morning with the latest updates and since the update I can no longer get into IIS.  I receive 3 events and IIS then crashes.  Can anybody help on how to fix this.  Thanks
    cjb
    IISMANAGER_CRASH
    IIS Manager terminated unexpectedly.
    Exception:System.NullReferenceException: Object reference not set to an instance of an object.    at System.Windows.Forms.ToolStripProfessionalRenderer.FillWithDoubleGradient(Color beginColor, Color middleColor, Color endColor, Graphics g, Rectangle
    bounds, Int32 firstGradientWidth, Int32 secondGradientWidth, LinearGradientMode mode, Boolean flipHorizontal)    at System.Windows.Forms.ToolStripProfessionalRenderer.RenderToolStripBackgroundInternal(ToolStripRenderEventArgs e)    at System.Windows.Forms.ToolStripProfessionalRenderer.OnRenderToolStripBackground(ToolStripRenderEventArgs
    e)    at System.Windows.Forms.ToolStrip.OnPaintBackground(PaintEventArgs e)    at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)    at System.Windows.Forms.Control.WmPaint(Message& m)   
    at System.Windows.Forms.Control.WndProc(Message& m)    at System.Windows.Forms.ToolStrip.WndProc(Message& m)    at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Process:InetMgr
    Application: InetMgr.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.NullReferenceException Stack:    at System.Windows.Forms.ToolStripProfessionalRenderer.FillWithDoubleGradient(System.Drawing.Color,
    System.Drawing.Color, System.Drawing.Color, System.Drawing.Graphics, System.Drawing.Rectangle, Int32, Int32, System.Drawing.Drawing2D.LinearGradientMode, Boolean)    at System.Windows.Forms.ToolStripProfessionalRenderer.RenderToolStripBackgroundInternal(System.Windows.Forms.ToolStripRenderEventArgs)
       at System.Windows.Forms.ToolStripProfessionalRenderer.OnRenderToolStripBackground(System.Windows.Forms.ToolStripRenderEventArgs)    at System.Windows.Forms.ToolStrip.OnPaintBackground(System.Windows.Forms.PaintEventArgs)   
    at System.Windows.Forms.Control.PaintWithErrorHandling(System.Windows.Forms.PaintEventArgs, Int16)    at System.Windows.Forms.Control.WmPaint(System.Windows.Forms.Message ByRef)    at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message
    ByRef)    at System.Windows.Forms.ToolStrip.WndProc(System.Windows.Forms.Message ByRef)    at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr, Int32, IntPtr, IntPtr)    at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG
    ByRef)    at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)    at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32,
    Int32)    at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)    at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
       at Microsoft.Web.Management.Host.Shell.ShellApplication.Execute(Boolean, Boolean, Boolean)
    Faulting application name: InetMgr.exe, version: 8.5.9600.16384, time stamp: 0x5215f003 Faulting module name: System.Windows.Forms.ni.dll, version: 4.0.30319.33440, time stamp: 0x52004310 Exception code: 0xc0000005 Fault offset: 0x00000000002c60ae Faulting
    process id: 0x15a8 Faulting application start time: 0x01cf28336135c44d Faulting application path: C:\Windows\system32\inetsrv\InetMgr.exe Faulting module path: C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Windows.Forms\a3f6e8ccbf74af4e1742eb3eed2c0b72\System.Windows.Forms.ni.dll
    Report Id: a0198ede-9426-11e3-80f4-00155d14d41c Faulting package full name: Faulting package-relative application ID:
    cjb

    Hi,
    IIS forum is more proper for this issue. It seems like that there is a similar post in IIS forum, please refer to it:
    http://forums.iis.net/t/1207720.aspx
    Regards, Yan Li

  • I am getting this message when installing Itunes "Error writing to file C:\ProgramFiles\iTunes\iTunes.resources\nl.lproj\aboutBox.rtf  Verify that you have acces to that directory" How do I fix this

    How do I fix this and stop it happening

    See:
    Issues installing iTunes or QuickTime for Windows
    If further problems post in the iTunes forum
    https://discussions.apple.com/community/itunes/itunes_for_windows

  • Apps wont close since I installed the latest upgrade

    Since I installed the latest update for my phone, I cannot close the apps.  As usual, I tap the icon, but it doesn't "wiggle", so I cannot close it. Has anyone else come across this problem.

    There's a new way to quit apps that requires less time. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.

  • Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

    since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
    XML Parsing Error: not well formed
    locations chrome://browser/content/browser.xml
    Line Number 1191, column 20:
    utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
    please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
    I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
    Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
    1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
    2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
    3. there may have been other errors, but I did not find them.
    How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
    Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
    Thanks,
    NOEL

    Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
    firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

  • I just installed the latest update on my iPhone 4 and now it's nothing but a white screen and my computer wont even connect it to my itunes when I plug it in the USB port. What happened?

       I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be restored. Now it won't connect to itunes or my computer at all and is nothing but the black start up screen with the apple logo, or it's just a white screen. What happened?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Since installing the latest update I can no longer get on my wifi network

    Help! Since installing the latest update I can no longer access wifi.

    Yes, see:
    https://discussions.apple.com/thread/6224241?tstart=0
    10.9.3 kills third monitor: Apple Support Communities

  • I installed the latest update of iTunes and now my computer is extremely slow and it freezes, What should I do to make it run  as usual?

    I installed the latest update of iTunes and now my computer is extremely slow and it freezes. When I click on the itunes icon, nothing happens, if it opens is a long time afterwards. Most of the time it does not even open, but the computer is very slow. It is a PC desktop running windos xp.

    Hey ArgentoSB!
    I have an article for you that can help you troubleshoot these issues:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Since installing the latest update my mother-in-law gets Error Code VM502 when sending to only 6 recipients

    Since installing the latest update my mother-in-law gets Error Code VM502 when sending to only 6 recipients. This didn't happen before the update.

    The error came from your providers server. You need to ask them why they are setting limits.
    Thunderbird does not have any limits.

  • Since installing the latest update on my iphone 3gs this afternoon whatsapp now says it cannot access my photos.  I have gone to settings-location services- but whatsapp is not listed in the list below.  Please help!!!!

    since installing the latest update on my iphone 3gs this afternoon whatsapp now says it cannot access my photos.  I have gone to settings-location services- but whatsapp is not listed in the list below.  Please help!!!!

    Contact Whatsapp for support.
    There is no logical expectation for Whatsapp to be listed under location services or for that to have any affect on what the app can access.

  • Is Yesterday I installed the latest update for Waterfox, today I have a Bing product on my computer which has crashed it twice thmorning. How do I remove it?

    Yesterday I installed the latest update for Waterfox, today I have a Bing product on my computer which has crashed it twice this morning. You put it there, tell me how to remove it completely.

    Please see Waterfox support here:
    http://www.overclock.net/t/975626/waterfox-36-0-1-11-march-firefox-64-bit

  • I have just installed the latest update ...IOS 7.0.4. Prior to this, my email worked fine. Now my AOL does not work; it gives an ID/password error. Everything works fine on my Windows computer. Any thoughts?

    I have just installed the latest update - IOS 7.0.4. Prior to this, my AOL email worked fine. Now it gives an ID/password error message. However, everything is fine on my Windows computer. Any thoughts?

    Hello there, Tim.
    The following Knowledge Base article provides some good troubleshooting steps for working on resolving your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Since installing the latest update of Photoshop CC two days ago, Auto Blend for focus stacking is selecting all pixels from the bottom layer instead of selecting the ones in best focus from each layer. Has anyone else seen this problem?

    I installed the latest update of Photoshop CC two days ago on my Macbook Pro, and now when I try to do focus stacking by opening multiple photos and doing Auto Align and Auto Blend, the blend selects the entire bottom layer instead of selecting the in-focus areas from each layer. I even tried again on a series of images where this worked a week ago and the problem occurs. I have Photoshop on a Windows 8 machine and did not apply this latest update and it works fine. Has anyone else encountered this?

    And since installing this same update, my Photoshop is crashing just after starting.
    Ashutosh.Nigam suggested me in this forum to change the permissions to SLStore & SLCache Folder, but it did not work.
    Ali from french Adobe support told me to delete my Settings files, but it was not enough.
    A girl with no name from the same team told me to update my video card driver, but you know I run the latest Mac OS X version and everything is updated, mademoiselle.
    Stephane sent me a link to a huge page of things to do :
    -  Troubleshoot account-specific fonts, but there wasn't any corrupted font
    - Delete account-specific Adobe cache files but... guess what...
    - Troubleshoot account-specific login items but... yes, that's it, I can see you understand me
    - Reset the access settings on the user account's Library folder... oh god, that was fun, I used the Terminal and sudo commands
    I did all of these things because when I tried to open PhCC in an other admin session, it worked, so that was an incompatibility between my session and PhCC. But, but, but, when I tried again to lauch the app in the second session, it worked fine but refused to quit. Ha ha ha.
    So you can try to delete your Settings files. I wish it'll work for you. If not you can try the long list above... or hope a better answer from the support.
    I didn't change anything but Photoshop on my session and they ensure that the bug is due to my session and not to their update. Strange affair.
    Good luck,
    JLuc

  • When I try to install the latest update I receive this message: "Apple Mobile Device Failed to start".  I am trying to update with my computer.  Help!

    When I try to install the latest update I receive this message: "Apple Mobile Device Failed to start".  I am trying to update with my computer.  Help!

    Hey AndreaKK,
    I would try the following directions:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you have Windows XP, there are slightly different directions in here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

Maybe you are looking for

  • When I click on an email link on a website it doesn't open my entourage mail, I have to cut and paste the email address in

    When I am looking at a website and it says contact us with an email address, in the past when I click on this my entourage 'new mail' page would open so I could contact them, but know that doesn't happen and I have to cut and paste the email address

  • Audigy 4 Pro problem "setup is unable to detect a supported product on your system"

    I have reinstalled my windows 7 one week ago and my audio card stopped working. I've managed to install manually one component of the audio card (multimedia audio controller) and now i have sound but the other one (PCI input device) still doesn't wor

  • Messed up iPod Backed up in Disk Mode - Questions...

    ITunes isn't recognizing my 2nd Gen iPod, and the updater only gives me the option to restore to factory settings. I was able to get the iPod into hard disk mode and backed up with PsyncX though. If I move into the backed up folder with Terminal I ca

  • Rotate photo question

    My camera does not rotate the photos. Everything comes off the card in landscape orientation. I am trying to figure out how to rotate the photo in photoshop touch. Does anyone know how to do it? I can rotate in the crop view but it keeps the canvas i

  • Question About Muse

    I created an Edge Animate file that included a simple mp4 video.  When I test or preview in Adobe Edge Animate the video works perfectly.  When I then save or better said publish my Edge file to an OAM and copy to/place in Muse...the Edge file does a