Since I installed the revised firefox the system runs at a crawl

I installed the new firefox. Since then it runs at a crawl pace. If I type a mewssage it takes time for each letter to appear, same with navigating any web site.

Duplicate post. See: https://support.mozilla.com/en-US/questions/859350

Similar Messages

  • Ever since I installed the most recent Firefox, might right clicker on my mouse does not work. How can I fix this?

    When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
    == This happened ==
    Every time Firefox opened
    == I installed the new Firefox

    Please can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.

  • Since I installed the latest Firefox my Roboform dose not work. It still works with IE.

    Since I installed the latest Firefox my Roboform dose not work. It still works with IE.

    I have Roboform Pro, I don't want to down grade to Lite. Roboform is working, but I can't get the full Toolbar to display all that shows up is the Show Toobar icon and nothing happens when I click it. So I can't fill in log on forms. Isn't there a way to get the pro version to work?
    Thank you for your input and trying to answer my questions.

  • Ever since I installed the Safari 5.1.7 update my trackpad malfunctions.

    Ever since I installed the Safari 5.1.7 update, my trackpad does not functing well. I know its not a faulty trackpad because it also malfunctions when I install a different mouse. The malfunction happens when I launch the Safari application. How do I fix this? Is there a way to undo a software update?

    Try rebooting into Safe Mode, this will clear some caches. I'm thinking one or more may have become corrupt. Have you done any basic troubleshooting such as removing he MTP's batteries and restarting it or restarting the computer or anything else?
    Also PLEASE  use the Profile Update , otherwise we cannot tell anything about your system which makes it extremely difficult to troubleshoot.

  • Hello. I can't watch videos on dailymotion since I installed the latest version of flash player.

    hello. I can't watch videos on dailymotion since I installed the latest version of flash player.Does anyone know how to fix this?

    Could you please let us know the operating system that you use and browser?
    Please let us know what you see in the following page: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
    Thanks,
    Sunil

  • HT1338 I clicked update since yesterday but the system refused to update

    I clicked update since yesterday but the system refused to update. The massage I got is: (Use of this software is subject to the original software License Agreements that accompanied the software being updated) Now what can I do to stop/terminate the updating?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT4623 Since I installed the new update, my search feature will not work. It will only search my ipad. None of the searh engines work in Safari

    Since I installed the new operating System, my search feature does not work. I can only search my ipad. None of the search engines work in Safari. How do I fix it?

    Just just to make sure, you do not see something like this when you try to do a search in Safari?
    Try clearing Safari in Settings>Safari>Clear Cookies and data. Then close Safari. Double tap the home button and drag the mini Safari window up toward the top of the screen in the multitasking display in order to close the app. Now reboot the iPad. Hold down on the sleep and home buttons at the same time until the Apple Logo appears on the screen.
    Try Safari again.
    The Spotlight Search feature on the iPad search) no longer searches the web, that is simply the way that Spotlight works now. Sort of a backwards move IMO but somewhat typical of Apple these days.

  • I had a problem in the Hard Laptop MacBook Pro you replace hard I could not install the system

    I Abdul Razak from Syria.
    Since a short period of OS X system stops working and request a new download system when what do I install the system and I can not show me a message that the disk is locked. I asked one of my friends about the problem and Nsahana that I replace the hard and you do, but I could not install the system or OS X on the new hard?
    I wish to help and quickly Thank you.

    Zap the PRAM and Reset the SMC, then try again.

  • I have been having problems since i installed the quicktime update yesterday. can i revert to the version before the update?

    I have been having problems since i installed the quicktime update yesterday. can i revert to the version before the update? how would i do that?

    Hi, I don't think I've done that for a few years, but what exact version was it you installed?
    Is this an Intel iMac, or a PPC iMac?
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    Pehaps more important, what exact problems are you having Kim?

  • My 2006 MBP 15" has now been erased. How do I install the system again

    Because I was having problems with my 2006 MBP 15 " - sudden freezing up,  I tried several ways of fixing it all  without success.
    Eventually, I was forced into erasing the 500 GB  harddrive completely using DU from the install disks (Tiger) that came with it
    and had hoped I could re-install the system afresh from the original disks.
    On start up all I get is the "Welcome page" again and it repeats itself continually. If i select any thing the spinning beach ball
    occurs and a forced shutdown is required.
    Everytime I do an install, I get to  a "welcome page" and go thru the usual entering of details etc.  but  every time after I get to
    clicking on "continue",  when setting up ownership/address,  I get a spinning beachball and can get no further.
    This  continually repeats itself and  If i select any thing the spinning beach ball occurs and a forced shutdown is required.
    I've tried starting up from an external drive with a firewire cable,  but again nothing constructive happens, but I do get a popup saying
    it can't find my "home folder as its not in the right place or its missing completely" 
    Using DU I have tried to do a restore but some how I'm unable to select either the source or the destination - its either all
    or nothing available in the side bar of DU.
    It seems to me that whatever I do on the MBP I get the spinning ball and no further - even leaving it for a couple of hours -
    and still spinning.
    Can anyone suggest ways of doing an install, please.
    Does it look terminalto you?

    The external drive is a bootable one done with SuperDuper.
    I am able to do a startup with it but then I get that window saying home folder is missing etc.
    Surely i should be able to install the Op/System using the original disks that came with it, or will they only work if there is something on the H/D  to start with. I completely erased it to start withj.
    I've just found an Install disk for Tiger I bought in 2006 - perhaps that might work or not.

  • I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

  • IPhoto won't install update and won't allow me to access my photos since I installed the Maverick update

    Since I installed the new Maverick update, iPhoto crashes on my Macbook Pro at the final stages of install and I am not able to acces my photos because a widow pop up telling me that iPhoto is being updated but it is not updating.  What do I do now?

    what version of iPhoto do you have? Have you gone to the App store and downloaded and installed the 9.5 update?
    LN

  • Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.

    Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
    When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
    I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
    Regards,
    JAD

    Hi Sydness,
    Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
    Charles
    Sydness wrote:
    I reset my SyncServices and the calendar sync worked perfectly after that.
    I followed the instructions found here:
    http://support.apple.com/kb/TS1627?viewlocale=en_US
    Mac OS 10.7.1 - MacBook

  • Since I installed the latest version of iTunes I cannot sync new downloads to my ipod. Before I installed this version I had two windows when I attached my ipod to my desktop but now there is only one. HELP

    Since I installed the latest version of iTunes I have been unable to sync new downloads to my ipod. Prior to this installation I would get 2 windows when I attached my ipod but now there is only one. The software does not recognise the device (I tried running the doagnostic) but I can see it on my desktop. Anyone know what I can do?

    Hi findmeat,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    About iTunes Radio
    http://support.apple.com/kb/HT5848
    Cheers,
    - Judy

  • I have had to re-install the system on my computer and now need to download Photoshop/lightroom etc again.  Can I do that without having to pay another monthly subscription?

    I have had a major problem with my computer and as a result have had to re-install the system.
    So I now have to reload programmes.
    I am a monthly subscriber to Photoshop & Lightroom but can't find a way to download them again without entering into a new subscription agreement.
    Anyone got any ideas how I should go about it please?

    Creative Cloud Help | Install, update, or uninstall apps

Maybe you are looking for

  • Flattening a pdf-file

    In the last version of acrobat reader for the ipad, I can "flatten" a pdf-file before emailing. (only then!) It seems to me that the "flattening' is not really "flattening" the pdf-file ! When I open this pdf-file on my computer with acrobat reader,

  • Selling Vendor Consignment Stocks

    Dear All, I have some vendor consignment stocks in my system which i am trying to sell off. However, when creating the delivery order, i am not able to pick the vendor consignment stock as it has item category K. What is the correct way in SAP to sel

  • Need to reset/reinstall address book (Contacts)

    The first thing I did was made a backup copy of the address book to look at the format.  I could not read it with a text editor I importing a cvs file that contain over one hundred email addresses, but I didn't notice that the email address was not s

  • IPhoto Calender - save file

    I noticed that the calender I produced was not there when I started iPhoto this morning. Does it not save the file? If not how would I save the work and all the pcitures so I could use them again next year? Thanks, Walter

  • Quik hlep!!!!

    Plz I need help wz my tablet once I instaled OS2 and cannot start my tablet will only give the welcome DEmo tell me plz what to do????!!!!!!!!!!