Since i installed windows 7 itunes doesn't recognise my ipod touch anymore. windows shows it as a digital camera

I just installed windows 7 because my computer was infected by a virus. Before i had windows vista. Now when i try to connect my ipod with the latest version of itunes, itunes doesn't recognise it anymore.
Windows recognises the ipod touch only as a digitalcamera.
I already shut down my firewall for every apple software product i had on my pc. And i updated itunes already.

Have you tried here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Similar Messages

  • ITunes doesn't "see" my iPod Touch but Windows 7 does. What can I do?

    Windows 7 using "MTP USB Device" driver so it recognizes that it's an Apple iPod but iTunes doesn't see it. I have spent the entire day following the "install/ininstall/start AMDS/stop AMDS" instructions ad nauseum...still no love. Frustration maxed out!

    Did you try here:
    iOS: Device not recognized in iTunes for Windows
    Did you do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • ITunes doesn't accept my iPod touch anymore. Help?

    I am not sure if this is an iTunes problem, an iPod touch problem, or a combination of the two. Everytime I plug in my iPod touch, I have to restore it to factory settings, and then repurchase anything I bought on the iPod before I plugged it in. This is the third time in a row that this problem has happened, and I am getting frustrated. Help?

    Have you tried here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Itunes does not recognize my iPod Touch using Windows 7 - 64bit

    Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
    Message was edited by: Mark DiGiacomo

    hi sally,
    see if this user tip by Yorkwill helps:
    +In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
    +1. First off you need to have iTunes installed and the ipod touch plugged in+
    +and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
    +matter what it’s recognized as, but it needs to be found by windows).+
    +2. Search for usbaapl in the C:\WINDOWS system folder:+
    +o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
    +o right-click the WINDOWS folder and select ‘Search’).+
    +o type in usbaapl and hit Search – try to ignore the dog!+
    +You should find the driver info in a sub folder of+
    +C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
    +Remember that location (either leave the search box open or copy the folder+
    +name into note pad – you’ll need it later)+
    +If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
    +been installed with the iTunes install and you’ll have to reinstall iTunes.+
    +3. Locate the ipod-camera device:+
    +o Open the device manager, e.g. using Start > Control Panel >+
    +Performance and Maintenance > System > Hardware Tab > Device Manager+
    +o Look for a device called ‘ipod’ - if your ipod shows up as+
    +‘digital camera’ it will be under something like ‘imaging devices’.+
    +4. Update the driver:+
    +o Right click the ‘ipod-camera’ in device manager and click on+
    +‘Update Driver’ – the Hardware Update Wizard will open.+
    +o Check the ‘Install from a list or specific location’ then click ‘Next’+
    +o Check ‘Search for the best driver in these locations’. Un-check+
    +‘Search removable media’ and check ‘Include this location in the search’.+
    +In the text box below type (or better copy and paste) the folder+
    +containing the ipod driver information found in step 1 (in the example+
    +above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
    +then click Next.+
    +You should now see something like ‘Apple ipod device driver’ or so. Continue+
    +installing that device. Once the driver has been installed the ipod will come+
    +to life and iTunes (if you have it open) will show it.+

  • TS1538 My Ipod is showing the iTUNES Logo and freezing and when i try to connect to iTunes to restore, iTunes doesn't recognised my Ipod. Help Please.

    I was casually charging my Ipod when suddnely the iTunes logo appears, so i connected it to my laptop and itunes wouldn't recognised my ipod. I tried puting it in recovery mode various times but it just doesn't work. Please notify me if you have a resolution.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Windows 7 doesn't recognize my iPod Touch 4th generation after I upgraded the device to iOS 5.

    Has anyone had any success with syncing a 4th generation iPod Touch in Windows 7 64-bit after upgrading the iPod Touch to iOS 5? Up until I upgraded the device's OS I couldn't for the life of me stop iTunes from popping up and trying to sync anytime I simply wanted to charge the iPod, but now after the upgrade I keep getting a system message that the device isn't recognized. Any ideas...?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Itunes not recognising my ipod touch on Windows 64bit. HELP!

    When I try and connect my shiney new ipod touch to itunes it says please connect this device to a computer running vista/windows 32bit... thus rendering it completely useless!
    Is there a way to fix this?
    Please I am desperate, I feel like I have completely wasted my money.

    I just got my ipod touch this morning and I am having the same problem with Windows 7 64 bit. iTunes is the latest 64 bit version. When I plug my ipod into any USB port I am told that it is an unrecognized device.
    I can however plug it into my netbook (also running Windows 7 but in 32 bit) and it is recognized as an iPod.

  • 2 ipod touches sharing home pc. Itunes doesn't recognise 2nd ipod

    2 ipod touches sharing home pc. The 2nd ipod is not being recognised by itunes. Do you need to set up another itunes account?

    I wish I could help you. I am experiencing the same problem. There is a problem with the mini and the new updates. Some more paranoid folks are thinking its a scam to get us to buy the new nano. I hope itunes and ipod fix this problem soon!

  • I was watching bbc iplayer and my ipod touch crashed.  it has a white blank screen so I tried to link it up to Itues but even Itunes doesn't recognise my Ipod.  Help!!!!!!

    I was watching BBC Iplayer and my ipod crashed.  I now have a white screen and it won't even sync to Itunes.  I have tried to reset it by pressing the home button for 10 seconds and it is still the same.

    Try the white-screen topic of:
    iPod touch: Hardware troubleshooting
    Next try letting the battery fully drain and then charge for an hour and try again. Frequently a white screen is due to a hardware problem

  • Itunes will not recognize my ipod touch but windows does

    I use windows 7 and everything was fine until I updated to the most recent version of Itunes 10. something.  Now when I plug in my Ipod windows recognizes it but I get this message from Itunes: iTunes could not connect to this iPod because an unknown error occurred (0xE800000A) 
    Any ideas?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HELP!! itunes doesn't recognize my ipod touch and i've tried everything!!!

    Alright, so i got an ipod touch this morning and came home to put music on it. first things first, it read it as a camera. i downloaded the new version of itunes and that seemed to take care of that problem. I tried everything on the apple website to try and fix the problem but it just won't read it. It works fine on my mom's computer but all my music is on this computer. what can i do??

    Ok people after messing up three days with my jailbroken ipod touch cauze my itunes didn't recognize it i figured out that the problem is first windows recognized it as a imaging device o as a camera, i found in the device manager was listed mi apple ipod under portable devices and there was the problem it has to be listed under universal serial bus controllers named as a apple ipod so this is what i did but first make sure u have correctly installed itunes and the apple mobile device support:
    1 open the device manager or windows button + r is run and then type devmgmt.msc
    2 look for the portable devices and find the apple ipod or wherever that is listed on your pc.
    3 once u find the apple ipod do a right click on it and click on uptade driver software
    4 take the manualy opcion or browse on my computer and then look for this folder on your computer C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    there should be the driver that itunes recognize and your windows wont recognize your ipod as a camera again but i repeat u have to make sure u have installed the apple mobile device support u can get it by extracting the itunes+quicktime package using winrar. so click on update or next what ever on the update process and next time itunes will open your ipod for sincying thanks to forums ilounge.com

  • My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

    My ipod touch is disabled and it says to connect to itunes to restore.  I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device.  I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!!  I don't know how to fix it and it is only a month old, should I take it back?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HELP! iTunes doesn't recognize my iPod touch

    okay well i've had my ipod touch for a few months now and i've never had a problem with iTunes not recognizing it or anything until now. The last time i put new songs on my ipod was december 23/08 and it worked perfectly, but now i go and plug my ipod into the computer and iphoto opens up and recognizes it just like usual; so no problem there. but then itunes on the other hand has that little loading circle that says that its loading but it's been like that for half and hour and hasnt done anything. I right clicked on the icon and it says "Application not responding" in light grey letters. I know that the USB ports arent faulty or anything because on my ipod it says that its charging. To fix it ive tried reseting my ipod, reseting the computer, updating itunes, downloading itunes and installing it all over again, plugging it into another USB port and still nothing at all happens. It has been like this for the past week and is getting very frustrating.
    Im not sure what else to do. do you think it's my ipod? or itunes? If anyone knows why this is happening please tell me! any help is deeply appreciated!
    (I put this question in the itunes section and ipod touch because i wasnt sure which one it belonged in)
    Message was edited by: keka04

    Does this problem occur when you open iTunes without having your iPod connected? You migh want to try the uing the disk utility to repair disk permissions. It's in Applications - Utilities - Disk Utility. Click on the drive that iTunes is on and click repair permissions.

Maybe you are looking for

  • Photoshop adds a stroke to my text -- bug?

    Good afternoon! I have several Photoshop CS3 files that are exhibiting a strange problem.  This symptop ONLY happens when I create a new text layer in one of these files. I create a new text layer and type some text.  Then when I select part of the t

  • Breaking change in MDAC ADODB COM components in Windows 7 Service Pack 1 (repost with MSDN liveID)

    As my MSDN subscription is connected to this liveID, I repost my question in the hope to get a faster answer: After I installed Service Pack 1 on my Windows 7 x64 Ultimate my applications which use MDAC 2.8 COM components for database access do not w

  • Time display in Query/Report

    Hi, If I don't select/restrict a "time" characteristic in a query, I guess all data (for entire time in the InfoCube) is displayed in the report? Correct? Is it possible to modify this display by default? Thanks Sabine

  • FI CO Integation: Document type for real-time integration with FI not there

    Dear Gurus, This is the error message that I got and I am looking for a solution could anyone help me please. I was doing simultaneous costing and doing Product Cost Collector reports.[KKBC_PKO] This is IDES 6.00 ehancement package 4, How do I define

  • Installing on a 500gb hard drive, in a PowerMac G5

    I have no way of finding out the password to get through. I am doing a clean install of Mac OS X v10.3.2, using a pc keyboard at the moment. C-key isn't responding, so I held down alt. I am dead end with  this firmware password protection. Help!!!