Since I restored my iPod, it displays an icon with an AC charger and an electrical outlet and there is no handling possible.
Since I restored my iPod, it displays an icon with an adapter charger and an electrical outlet. So I connected with an AC charger as the demand for more than 48 hours but no change. My iPod no longer recognized in itunes or my computer and functions no longer work. I tried to reset it, Apple appears to leave room for a few seconds later the same icon with an electrical outlet and impossible to put it into disk mode. Help me please I don't know what to do. And forgive me my bad English I speak only French.
Read the article that you linked
Similar Messages
-
i did a reset on my iPod, then a restore now I can't do anything with it, turns off and on all the time, is there anything I can do?? cheers
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to restore my ipod touch but it says it could not be and than an unknown error occured (3194) please help me!!
Fix Error 3194 from iTunes during iPhone restore
iPhone Error 3194 - How to Fix iTunes Error 3194?
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help
Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
Could I try anything else ?
Cheers Chris -
IPod shows a folder icon with exclamation point after discon
Since I always ignore instruction booklets with new devices, I failed to notice the warnings with regard to configuring my iPod mini on a Windows PC. I did not install the included software first and I tried to sync with iTunes (my girlfriend already has an iPod mini so iTunes was already installed). As a result I ended up with folder exclamation point icon.
I tried the folowing already:
1) Reformatting the disk through windows explorer
2) Reset:
The folder icon with exclamtion point appears after reset
3) Running Updater 2004-04-28:
After plugging in the iPod at the prompt, the message "iPod updater can;t install firmware on connected iPod. The iPods hardware and the updater firmware are not compatible." I got the same message when doing the same thing in 'disk mode'.
4) Running the software on the disc that came with it:
When prompted I connected the iPod to the PC. I get a message "Your iPod has been connected. Please wait while the system recognises the device". And then nothing happens.
Please can anyone advise me how to fix this problem?Ok guys!! I did it!! I fixed my iPod! I want to thanks Apple for the great help they gave me (I'm being sarcastic)!
I remember that I downloaded iTunes 4.9 and the iPod updater from 2 two weeks ago on my neighbor's computer.
As this problem (IPod shows a folder icon with exclamation point when I turn it on) only happened since I upgraded iTunes to 5.0 version and iPod updater, and after one and a half day calling Apple, reading the entire web site looking for an answer, discussing with a lot of people about this problem and nothing happened, I wanted to give the last try and went to may neighbor's computer!!
I turned on the iPod updater.
When it said i had to connect my iPod I did it
Then I pressed RESTORE
After that I plug it in the A/C adapter
It worked
I connected the iPod to the computer again
iTunes worked and my iPod is working as a new one!! -
IPod shows a folder icon with exclamation point
IPod shows a folder icon with exclamation point when I turn it on, and says: "www.apple.com/support/ipod"
I can't restore the I Pod or reset it as they first told on the support web site, because it only appears that message...
I installed the latest version of the iPod updater and it didn't work also.
When I go to the iPod updater it gives me the "iPod service error" message.
What must I do!
I'm on a Windows XP.
Help me please!!Ok guys!! I did it!! I fixed my iPod! I want to thanks Apple for the great help they gave me (I'm being sarcastic)!
I remember that I downloaded iTunes 4.9 and the iPod updater from 2 two weeks ago on my neighbor's computer.
As this problem (IPod shows a folder icon with exclamation point when I turn it on) only happened since I upgraded iTunes to 5.0 version and iPod updater, and after one and a half day calling Apple, reading the entire web site looking for an answer, discussing with a lot of people about this problem and nothing happened, I wanted to give the last try and went to may neighbor's computer!!
I turned on the iPod updater.
When it said i had to connect my iPod I did it
Then I pressed RESTORE
After that I plug it in the A/C adapter
It worked
I connected the iPod to the computer again
iTunes worked and my iPod is working as a new one!! -
My ipod touch 4th gen wont turn on or charge and is in recovery mode.
my ipod touch 4th gen wont turn on or charge and it is in recovery mode but when it says preparing to restore it on itunes when i plug it up then the ipod disconnects from the computer and just shuts off again help me please. when it does act like its going to charge it doesnt charge and just brings up the "connect to itunes" thing.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1604 -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPod. Any ideas???
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
My ipod is no longer connected with my mac air and I wish to transfer all the music from my ipod back to my computer. What should I do?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts. I don't know what else to try, short of resetting the iPhone and completely reloading as a new device. Any ideas, anyone?
It's good to know. The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit. The larger problem is that it partially works: partially and erratically. So clean-up is great fun.
-
Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.
In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it. -
I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it
Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
I got a usb charger for my 4th gen Ipod touch that at first allowed my to charge and transfer music from my laptop to the Ipod now nothing happens when I plug the usb cord and Ipod into my laptop. Its mac so it is an apple system. I am wondering how I can fix this problem I am not very good with techy stuff so this is very confusing how it was working and it just stopped.
Hi johnsmiff99,
That is never fun when your iPod touch does not show up on your Mac. Take a look at the article below to walk you through on getting it to show back up on your iTunes. It is very easy to read so you wont feel overwhelmed with to much techy jargon. Let me know if you get this worked out.
If you don't see your connected device in iTunes for Mac
https://support.apple.com/en-us/HT203979
Take it easy,
-Norm G. -
I charged my ipod with an iphone charger and wont turn on.. what to do?
I charged my ipod with an iphone charger and wont turn on.. what to do?
Try here
http://www.everymac.com/systems/apple/ipod/ipod-faq/ipod-troubleshooting-wont-tu rn-on-appear-hung-sad.html
Maybe you are looking for
-
Assigning custom,stamp duty,custom clearing agent conditions by all Vendor
well i have create above condition i want to assing all this with the all vendor. ie custom duty must go to commissioner vendor, custom clearing charges must go to C & F agent. example particular condition type vendor basic duty
-
Customizing Pivot Table format in answers
Hi, I have some questions about formats of a Pivot Table. 1) I want to change the position of row headings in Pivot Table view, show them on the right side of the table. Is there any way to do that? The reason is to show "results" column (sum on the
-
Problem with RSA/AES and the wrapped Key
Hallo! For a server-client communications, I would like to use a hybrid encryption. For this I create an object of a serializable class that contains several properties, including the data that are to be transferred from A to B (Object, encrypted by
-
Firefox will not start -already running- but not visible in askbar - W-7
Asin XP, now on windows 7, firefox occasionally would not restart and I had to open task manager to end it. THIS TIME, it does not appear in taskmanager. I uninstalled, restarted the cpu, and installed anew. same issue. Firefox will not run -- get th
-
How to modify the automated openscript result.
Hi, I am new to OATS. I would like to know how do we change the automated result. For Example. - Object Test: Test 1.524 Passed Attribute 'title': Expected: 'Detach Pane', Actual: 'Detach Pane' 0.002 Passed Attribute 'alt': Expected: 'Detach Pane', A