Since I updated to 5.0.1 I can't connect to App Store!  Any ideas?

When I go to the app store (on my iPad 1 or iPhone 4), the spinning wheel appears and it said "Loading..." but never loads.  This happened after I updated both devices to 5.0.1.  Any advice would be appreciated.  Thanks!

I would start with something very easy and harmless. Restart and/or reset the devices and see what happens.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

    I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • After updating to 10.6.7 I can't connect wirelessly to iCal any ideas?

    Hi Everyone,
    Here is my problem, I have an ipod touch and an iPad that I have been able to connect to my iCal server, and update everything just fine. After I updated my server to 10.6.7 I can't connect to my iCal Server. Funny thing is I can connect with my 2 mac mini's that are hard wired and my Macbook Pro which is wireless. For some reason its just the 2 portable iOS devices that can't connect. I haven't changed any setting at all. Of course I use my portable devices to access my calender the most when I'm on the go. Any ideas would be great! As always thanks for any help in advance. Also if you need any config info let me know and how to do it. I know very little about command line.
    Thanks
    Kcam1999

    Hi Kcam
    Have you also updated your iOS devices to 4.3.2?
    Taylor

  • Can sign in with Apple ID, but can't connect to App Store for updates

    My wife just received her new iPad on Friday. When she went to update the apps that indicated they needed to be updated, she was able to sign in with her Apple ID. However, after a few seconds of processing the message appears that her iPad was unable to connect to the App store. (She was connected to the internet through WiFi). The next day at the Apple Store, the same thing happened as well as to other users, including those at the Genius Bar so we are not alone. Any insights? We thought that by the end of the weekend the issue may have been resolved (high traffic / server overload???) but still locked out of the App store.

    OK so here is what seems to be the problem -- Apps and under which account they were purchased / downloaded. My wife had downloaded a slew of apps under my Apple ID in the past, so when she attempted to sign in with her Apple ID there is now a conflict (this was not an issue before iOS 5.1 or so it seems). This simple fact totally prevents access to the App Store. This explains why my iPhone could connect to the App Store (it only has apps downloaded with my Apple ID) and hers could not.
    So we sat down and made a list of all of the apps on her iPhone and iPad (the ones she wanted to keep), then went into iTunes and clicked on APPS (under Library in the left column). Once you are in there, a list of apps installed appears. Right click (option-click) on each app icon to GET INFO -- this displays which Apple ID account was used to download that particular app. (Thanks Rysz)
    Thankfully all of the apps that were causing the conflict were free, so it was simply a matter of deleting these particular apps off of iTunes (on her iMac -- right click to delete) as well as her iPhone and iPad. Then all you need to do is re-download them when she is signed back into the App Store with her Apple ID.
    After I deleted all of the apps, I again tried to sign in to the App Store to re-download the apps she wanted to replace. But I was still getting the dreaded error message stating "Can't Connect to App Store". So on her iPhone I went to Settings and reset the network connection, signed back in to our Airport WiFi network. Tried again, no luck. Signed out of the App store and re-signed in, and glory hallelujah -- I was now able to access the App Store and start the download process for both the iPad and iPhone (thanks Thom_D for the suggestion).
    Once everything was back to normal, plugged each device in separately to her iMac and resynced in iTunes. Knock on wood, I think it is now working like before.
    Hope this helps a fellow user out there.

  • Why I can't connect to app store and can't update the new?

    Why I can't connect to app store and can't update the new?

    Are you trying to update on the phone or update with the phone connected to the computer? are you connected to wifi?

  • I have done the software updates on my laptop but still can't get the app store

    Hello,
    I am trying to download the app store for my laptop, however, I have done all the system updates (numerous times over the past few months) and the app store has never appeared.  I can't seem to find a link to download it from the website and am not sure how I am able to get it on my computer without reinstalling my whole operating system or something (which I really don't want to do if I can avoid it).
    Any information on this issue would be greatly apprieciated,
    Lauren

    You need to purchase and install Mac OS X 10.6 and then update to at least 10.6.6 to get it.
    (57985)

  • Can't connect to apps store when I'm trying to update and download apps. What's wrong?

    When I'm trying to update apps and download apps, apps store pops up and said that cannot connect to apps store. Does anyone having the same problem? Thank you.

    Most likely the problem is again with some firewall/privacy filter. Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? Some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

  • Can't connect to App store post MacOSX10.8.5 update

    I am unable to connect to the App Store after updating my macbook to OSX 10.8.5. Following is the message I get,
    Nothing happens even if I click Continue button.
    Is this a bug in OSX 10.8.5 update? Is anyone else facing this issue?
    Thanks,
    Amar.

    Did you guys happen to think about how busy the Apple servers were yesterday? A billion planet-wide folks downloading the new version of iTunes needed to apply iOS 7 to iOS devices, iOS 7 for every kind of iOS device and the updates to all the apps that developers created for the new iOS that required first the new iTunes and then iOS 7 before they would be available to download.

  • I have an iPod  that when I try to update the Apps that are shown to need update-ding and when I indicated to have them updated I get a message "can not connect to App store". The ipod has been updateing until recently. I came still down load new App  and

    I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
    I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it.  The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
    I have erased all information and started over as a new iPod Touch but the problem persists.
    I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
    After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
    Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
    Thank You for your concideration

    I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
    I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it.  The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
    I have erased all information and started over as a new iPod Touch but the problem persists.
    I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
    After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
    Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
    Thank You for your concideration

  • I haven't updated to 8.2 and I can't connect to itunes store either

    When will the iTunes store be up and working???

    Hi, how do we let Apple know about the problem? I've been searching everywhere.... I can see it's a common issue so the problem must be on their end. P.S. My warranty has expired so it seems I can't contact the help desk....
    Thanks for listening..

  • Some of the applications on my iPad cannot be updated because the iPad cannot connect to App Store

    I don't understand why the applications I have on my iPad don't get updated. Every time I choose Update All, there appears a message saying CANNOT CONNECT TO APP STORE. Is there any problem between my iPad and the App Store or is there any problem with the App Store itself?
    Best regards
    William

    Hi Just go to ITunes Sign out then Sign back in. This may help. Also you need to update software to ios 8.1 Cheers Brian

  • HT201210 I have an iPad 3. When I try to update an apps i get the message "connect to apps Store". How do I rectify this.

    I have an iPad 3. When I try to update an apps I get the message "can't connect to apps store" even though me wifi is up and running and everything else is working fine. Does anyone know how to resolve this issue?

    Try and update using iTune (computer) and sync to iPad.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/47e895d853a70f226f0 e254ed8bca59f.jpg

  • IPhone 4S Won't Connect to App Store After iOS 6 Update!

    After a long wait for the new iOS update when I enter the "App Store" there is a box that pops up saying that I can't connect to "App Store," that even happens while I'm connected to WIFI... Although I still can connect to "iTunes" music store!

    Reset your iPhone.  Hold Sleep Key and Home Key together for more than 15 sec.  Now try your App Store again.

  • Macbook pro6,2 unable to connect to app store for software update

    Purchased a used macbook pro6,2. When I ask the macbook to update software, the can't connect on app store page comes up. I can connect to iTunes.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in.  Is there a way I can tell which library I am in?

    I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in.  Is there a way I can tell which library I am in without closing and reopening?

    No. Frequently the apps take up more storage space on the iPod that the file download size.

Maybe you are looking for

  • Form wizard cannot detect fields

    I designed a form in InDesign CS4 and saved it as a high resolution PDF file. I open the PDF file in Acrobat 9 Pro and go to Forms > Start Form Wizard, select the current document and get the error message: "No new form field annotations were detecte

  • JAX-RPC and Parameter Interfaces

    I am designing the Web Service interface for our project using JAX-RPC, and have enjoyed the ease with which I can create Web Service deployments and WSDL documents. However, some of the developers on my team have chosen to create their Data Transfer

  • Why some applications in the ipod closes shortly after opening?

    Yeah it is a problem in my ipod i download apps and later when i open it, close on their owb

  • COM Automation: getProperty problems

    Hi, I know that the topic of this post don't belongs to this subcategory, but really I cannot find where to put it. I'm implementing a solucion using Oracle COM Automation to use a DLL through its COM interface from PL/SQL. The connection is done ok,

  • IE02 - Address Change

    I am looking for BAPI for Function Module that can change NAME & NAME1 fields in Address of Trasaction Code IE02 ( Ie IIn IE02--> Location Tab -->Address Block Click  Change Button --> you can find another Window ) a®