Since I upgraded, I can not open my email files. I've unblocked pop-ups, cleared history/cookies, etc. What's next

I installed Firefox 4. Now when I go to look at my emails I cannot open them. I've called my provider and they can, so it has to be something with this computer. I've checked all the settings I can think of- unblocked the pop-ups, cleared anything I can think of.

OK there is a solution to opening the .asp files in Dreamweaver whith a double click. The clue was here: http://forums.adobe.com/message/6091711#6091711 for PC users.
HERE IS THE MAC EQUIVALENT: in the Finder, RIGHT CLICK any .asp file. select "Get Info"  Select "Adobe Dreamweaver CC" it may not show up at first, you will have the option to locate it in the Applications folder.
DON'T FORGET to click the button below: "Change All" forcing ALL .asp files to open within Dreamweaver. *note: I tried everything else listed, including installing the "ASPNet_Support.zxp" extension found in "DisabledFeatures" in the "Configuration" folder, which did cause the icons inside of Dreamweaver to actually appear as DW docs. However try the finder option first it may be the quick fix.
Here is the legacy extension insaller description: http://forums.adobe.com/message/5520693#5520693#5520693

Similar Messages

  • OS 10.8.4 (recent upgrade) and can not open a .dmg file

    I am using an iMac 2.8 GHz Intel Core i7 and have recently upgraded to 10.8.4 and can not open any .dng file. It indicats that it is not recognizeable. How can I intall my downloaded software?
    Thanks

    Something else is going on then.  Set up a test/new account.  If the problems appears there too, then it means it's a system wide problem.
    Another thing to try if you have not already done so is to disconnect all devices from your computer, repair permissions and restart your computer.  Or do the following: 
    Mountain Lion Recovery
    Boot up from your computer by holding down the command+r keys.  This will take you to the recovery drive.  
    Select Disk Utility & hit Return.   
    In Disk Utility select the HD on the left & click on Repair Disk (bottom right).

  • I can sent emails from my thunderbird account, but since 14 januari I can not open incoming emails. the program is asking for a password thar I do not have

    I use my other email adress for an answer <!--jjfloresse--> <name>@gmail.com, but the email that is not working is <!--jjfloresse--><name>@zeelandnet.nl
    Actual name removed from display; by a moderator; for privacy reasons. ~J99

    Contact your email provider's support about your passwords.
    They usually provide one or more methods for recovering or resetting passwords.
    This page may include the gmail login reset https://www.google.com/accounts/recovery/

  • My Hotmail account is blocked. I can log in but can not open the emails. If I use Iternet expolrer it works fine. What can I do?

    My hotmail is blocked.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I loaded adobe reader and I can not open a pdf file.  It keeps telling me I need adobe acrobat.

    I loaded adobe reader and I can not open a pdf file.  It keeps telling me I need adobe acrobat.

    What is your operating system?
    You don't need Acrobat to view PDF files; can you post a screenshot of that message?
    Also, is this a local or online PDF?  If online, in what browser?

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Since the update i can not open webpage,also even when i close it keeps running in the background.

    since the update i can not open any webpage,ex:homepage i use www.besthomepageever,nothing open there,i tried yahoo.com same thing,plus it keeps running in the background when i close it and im asked to restart the comp.
    First time in all these year i have problem like this
    Thanks
    Gerard
    Ps,i deleted it and reinstalled it same thing

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?. Then restart.

  • Recently updated Mac OS 10.5.8 to 10.6.8 and and can not open exisiting Illustrator5 files or save new files.

    I recently updated my MacBook Pro OS from 10.5.8 to 10.6.8 and can not open existing Illustrator5 files or save new files can someone help?

    I think you have a corrupted upgrade. Do you have a backup of your old system?
    Here's what you should do for now:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • CAN NOT OPEN PDF EMALE FILES RECIEVED

    I have bought 3 up grades, first $323.54 Aug 21, 07 second $95.93 Aug 11 012, third Dec 1 012 for another $236.73. My problem has been I CAN NOT OPEN PDF EMAILS. This purchase yesterday has not solved the problem, why does it not give me the ability to fix the problem?

    Can you let us know exactly what three products you purchased, so we can direct you to the right place.

  • Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hey ilyaz20360341,
    Could you please specify how exactly did you transfer Acrobat from one MAC to other.
    You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
    If you have done the same way, then let me know if you are able to open Acrobat itself.
    Do you get any specific error message while opening a PDF?
    Hope to get your response.
    Regards,
    Anubha

  • InDesign CS5 (Mac OS 10.6) can not open its own file

    I need guidance to open an artwork file that in one hour I have to send to the print shop. InDesign refuses to open its own file.
    Any clue? Adobe, please help.

    Re: InDesign CS5 (Mac OS 10.6) can not open its own file
    Bob and Peter
    Thank your for helping us out. It was really necessary to ask a coworker to open the file and export it in InDesign markup language.
    Three hours later than expected, but it's done!
    We are stuck here. I'm a Master Collection user of CS5, using only Dreamweaver, Illustrator, Photoshop, InDesign, Bridge and Acrobat Pro. (I don't know why I bought the Master's). My coleague former Window user, got a Mac in May and downloaded the trial version of Design Studio Standard Collection of CS5.5. Before expiring, we purchased its license and filled it in the active trial version.
    A couple of months ago we noticed that were missed Plug Ins on his version and contacted Adobe who instructed us to download the whole files again. We never did because it is a pain to get rid of the missing parts of a pre installed trial version etc.
    I will ask Adobe to send a CD disk for his version.
    Regards,
    Junia

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • I can not open my email: hkasmetsky@clix.pt

    I can not open my email: [email protected]

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • My Organizer can not open the catalog file it crash down.

    My Organizer can not open the catalog file it crash down.

    OS X Yosemite And PSE 13
    2015-01-16 8:24 GMT+01:00 Anwesha Dev Chaudhary <[email protected]>:
        My Organizer can not open the catalog file it crash down.  created by Anwesha
    Dev Chaudhary <https://forums.adobe.com/people/AnweshaDevChaudhary> in *Photoshop
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7101754#7101754>

  • HT1430 I can not open my email.  A box comes up stating- CAN NOT GET MAIL, The user name or password for "Hotmail" is incorrect,   I never have to use a password on my IPAD.    What is going on?

    I Can not open my email, Never had this problem...   Message says:   CAN NOT OPEN MAIL, The user name or password for "HOTMAIL" is incorrect.
    What is going on???????

    Check your email settings (on your iPad) for that account and make sure the username and/or password are correct.

Maybe you are looking for

  • How to capture text input value by user in a LOV search popup page?

    I need to capture the input by the user in LOV search page. I added one controller in the LOV region, and the flow is also working, but what I need to hold the search input in the search popup page. Also do you know what is the id of " Search Term" t

  • Can't get in and out markers to work

    In Pro 7, I can't find the In and Out markers on some clips I've downloaded off Limewire. When I go File:New audio and record blank noise for a few seconds, the markers appear. How can I get the markers and trim down my Limewire clips? Thanks g5 dual

  • Powershell Script to change the default user Account picture for all users in windows 7 and 8

    Hello, Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ? I will deploy this through MDT TS as Custom TS after OSD. Shailendra Shailendra Dev

  • List Box With Writing Facility

    Hello Experts ,                         I want to create a list box in selection-screen with input facilty,                         i.e i should be able write in that list box just in case of parameters , right now                         i'm able to

  • Extract get Abendent

    Hi, I have GG 11.1.1.0.0 on oracle 11gR2/ASM with active-active configuration. The extract process is getting abendent. It seems GG is not able to connect to ASM instance. Below is the extract report. Oracle GoldenGate Capture for Oracle Version 11.1