Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Similar Messages

  • Ever since i upgraded to Mountain Lion I experience occasional problems: 1) trouble restarting and 2) Browser freezing. Someone suggested getting more RAM. Would that help solve my problems?

    Model Name:
    iMac
      Model Identifier:
    iMac9,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.66 GHz
      Number of Processors:
    1
      Total Number of Cores:
    2
      L2 Cache:
    6 MB
      Memory:
    2 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    IM91.008D.B08
      SMC Version (system):
    1.44f0

    iMacs are particular about their RAM - I stick with the two most recommended here: OWC (macsales.com) or Crucial. Both have fair pricing and lifetime warranty.
    http://eshop.macsales.com/shop/memory/iMac/DDR3_2009
    2 x 4 GB are less than $50 and they have great install videos online (under the tech support tab).
    FWIW, I have that same combo coming for my MBP (in addition to an SSD drive - yes!!).

  • My iphone 4s ands my macbook pro will no longer sync calenders since i upgraded to Mountain Lion

    Since I upgraded to Mountain Lion, my Macbook pro and my iphone 4s will no longer sync calendaers

    Since I upgraded to Mountain Lion, my Macbook pro and my iphone 4s will no longer sync calendaers

  • My mobile hotspot no longer works since I upgraded to mountain lion. What happened and how do I get it back?

    My mobile hotspot (Samsung Note II)  no longer works since I upgraded to mountain lion (running on MacBook Pro)  What happened and how do I get it back? "
    Keep getting error message:
    "Could not join “NAME-HOTSPOT”.
    A connection timeout occurred"
    Please someone help me with this - I do a lot of travelling and use my hotspot! 
    Thanks

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wrieless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • I can't play videos on youtube since I upgraded to Mountain Lion. It says, Blocked Plug-In

    Since I upgraded to Mountain Lion, I can't play videos. It says, "Blocked Plug-In". I never have had a problem before.

    I resolved this problem with the latest Adobe Flash Player. I don't know why it didn't tell me that in the first place.

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

  • Why do i have to keep Force quitting applications ever since i upgraded to Mountain lion. It is very annoying when applications cannot be existed normally

    Why do i have to keep Force quitting applications ever since i upgraded to Mountain lion. It is very annoying when applications cannot be existed normally.

    Does your system meet these Mountain Lion System Requirements?:
    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    And as user macsonrisanoted above, 4 GB of RAM is the practical minimum amount of RAM that Mountain Lion really needs since the OS itself uses at least that much often by itself.

  • Very frequent Time Machine corruption since I upgraded to Mountain Lion

    Since I upgraded to Mountain Lion, I encounter very frequent Time Machine corruption.
    A few backups are OK, and then, I get an error "Time Machine has verified your backups and needs to create a new copy in order to enhance fiability...".
    In the console, I can see a lot of these errors :
    29/07/12 11:10:33,384 com.apple.backupd[17480]: Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 "The file “objects.xib” couldn’t be opened." UserInfo=..... {NSURL=file://localhost/Volumes/Copies%20de%20sauvegarde%20Time%20machine/Backu ps.backupdb/...objects.xib, NSFilePath=/Volumes/Copies de sauvegarde Time machine/Backups.backupdb/....objects.xib, NSUnderlyingError=... "The operation couldn’t be completed. Input/output error"}
    29/07/12 11:37:53,834 com.apple.backupd[17758]: Error: (-5000) SrcErr:NO Copying /Applications/VLC.app/...
    29/07/12 11:47:52,633 com.apple.backupd[17758]: Error: (-43) SrcErr:NO Copying /Applications to /Volumes/Copies de sauvegarde Time machine/Backups.backupdb/...
    Everything has been working perfectly well on OSX Lion for months...
    I already have reselected my Time Machine volume, and already have accepted a full new backup (3 times !) and it always finish like this...
    Any idea ?

    I had the same general problem: every few minutes I would get the message "There was a problem connecting to the server 'myserver'. Contact your system administrator for more information."
    The problem went away for me when I reset the sync server.
    http://support.apple.com/kb/TS1627
    I hope this works for others as well.

  • Can't publish my website to a folder since I upgraded to Mountain Lion

    I canot publish my website to a folder since I upgraded to Mountain Lion.  It starts to upload and then quits.  What can I do to publish my website?  I use iweb.
    Angie

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • Ever since i upgraded to mountain lion, my macbook pro is really really slow

    ever since i upgraded to mountain lion, my macbook pro (17" 2010 intel i7 4GB ram) is really really slow, specially at start up and shut down. any solution?
    my hard drive is has about 200 GB free space, and i do regular varification for my drive. i almost regret upgrading to mountain lion :-(

    Depending on the software you use (and how many programs you use at once) you may need to add more RAM. Shutdown with 10.8.2 is noticably longer than Lion's shutdown (and even slower than the original release of 10.8). I suggest you reboot your computer and immediately launch Activity Monitor. You want to watch two things: 1) RAM - as you use the computer over the next couple of hours after the reboot are you seeing the Page Out number increasing pretty quickly? That would be an indication that your computer is quickly using up RAM and pushing software and data into Virtual Memory to make room. This could account for the slow computer. 2) CPU - unless you are running some heavy duty software, your CPU usage may spike close to 80-90% for a few seconds but mostly hover in the 20-40% range. If it is higher than that, or if you see a single process using more than 70% constantly you may have a rogue process that is dragging the computer down.

  • HT1338 After I upgraded to Mountain Lion, I cannot get my external speakers (Bose) to work on my iMac.  Any help?

    After I upgraded to Mountain Lion, I cannot get my external speakers to work (Bose).  What can I do to fix?  They worked fine prior to upgrade.

    If you haven't already, go to your Applications folder>System Preferences>"Sound">click on the center tab labelled "Output">highlight your external Bose Speakers in the list by clicking on it>turn up the Volume slider at the bottom of the window.  Hopefully that solves your problem.
    Hope this helps

  • After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

    after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Hard drive packed up, but had Time Machine backup. I installed new sad and upgraded to Mountain Lion., but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  Graham

    Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  A backup run did not install either photos or songs. Graham

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

    After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac.  Anybody having similar probelms?
    I am thinking about doing a clean install of Mountain Lion.  Would I be able to restore my applications and data from Time Machine after the re-install?

    My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem.  After it sleeps, I go to use something... and the beachball of death occurs.  This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
    It could possibly be revolving around safari... as that is really the only thing that is running consistently.  I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
    This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008.  This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
    I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

  • After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem?

    After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.

    http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
    See if you have supported applications > http://www.roaringapps.com

Maybe you are looking for

  • How can i Display my images in cover flow view in Keynote?

    I am working on a project .I am on Mavericks . I need to make a presentation of my project ideas . My project involves showing some images in cover flow view . So, is there any way i can show my images in cover flow view in keynote or pages app or by

  • Creative Cloud Education Subscription Australia

    Are the 5 free web hosting packages included in the Creative Cloud Education (Australia) Subscription? I am a university staff member and Business Catalyst Standard Partner.

  • Order By Query  runing very slow

    I am facing a problem when doing order by on a table. My select query is working fine, but when i do order by (even on the primary key) it just goes on and on with no results. Finally i need to kill the session. The table has20K records. Any suggesti

  • Missing points too

    I am missing points for $600 in purchases. What do i need to do? When I go to add the receipts it tells me the transaction was laready added, but the points aren't there.

  • Can't start dbca under suse 10

    Hey DBA's Whenever I try to start the dbca tool to create a database I get the following error: Failed to load Main-Class manifest attribute from dbca.jar I use this command: java -jar dbca.jar I use Oracle 10gR2 for testing.. Thanks in advance