Since I upgraded to OS X Mavericks My MacBook Air will not recognize My Nook HD

I recently upgraded to OS X 10.9 Mavericks and now when I connect my Nook HD+ a new finder window is opened, but no device is displayed?

Check the Barnes & Noble or Nook websites to see if there are any Nook driver or software updates for OS X Mavericks.

Similar Messages

  • Since I installed the last Mavericks update, my MacBook Pro will not recognize my Nook ebook reader

    Since I installed the last Mavericks update, OS 10.9.2, my MacBook Pro will not recognize my Nook ebook reader.  Maybe it's a coincidence; maybe not.  Any ideas?

    Check the Barnes & Noble or Nook websites to see if there are any Nook driver or software updates for OS X Mavericks.

  • HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

    I recently upgrade my OS and now my MacBook Pro will not boot up

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My Mac Mail subfolders on my MacBook Air will not sync in alphabetical order. I am assuming it is a setting that I am not finding since my iMac based at my home office is fine, so is my iPad and iPhone. The core source is Exchange.

    My Mac Mail subfolders on my MacBook Air will not sync in alphabetical order. I am assuming it is a setting that I am not finding since my iMac based at my home office is fine, so is my iPad and iPhone. The core source is Exchange.

    If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
    Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

  • After downloading mavericks, my MacBook Air is not opening. Stays in gray with Apple showing. What i can do please?

    After downloading mavericks, my MacBook Air is not opening. Stays in gray with Apple showing. What i can do please?

    Try this troubleshooting advice
    http://support.apple.com/kb/TS2570

  • I upgraded iphone 3gs to ios6 but now iphone will not recognize SIM card

    Hi,
    I upgraded both ipad 2 and iphone 3gs to ios6. I don't see any issue with ipad 2 but now iphone will not recognize SIM card. "Please insert a SIM card" message

    You say "... but now panorama is not working".  Panorama never was supposed to work before iOS 6, so you'll be using it for the first time with iOS 6.
    The way to enable panorama is to open the camera, click the "options" button at the top center, and select panorama.
    Does this work on your iPhone?  If not, what symptoms of failure do you experience?

  • TS1398 Since I upgraded to iOS 7.0.2 my phone will not auto-connect to the home WiFi network.

    I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network.  Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data.  The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
    Is anyone else seeing this problem?

    Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.

  • Installed Maverick, now Macbook Pro will not boot in normal or safe mode. UPSET!

    Hello to anyone who can be of help to me. I have been without my 2008 Macbook Pro for months due to installing Maverick. After installing it, within a day or two, it crashed and now will not reboot in normal mode or sade mode. I've never had any problems from this computer until now.
    I don't know much about Macs and I can't fix this. I also live over an hour away from any Apple store. I feel this is Apple's fault and I am pretty upset that this has happened to my laptop.
    I understand this to be a Kernal Panic or something like that, which happens after installing a program, like Maverick. I have tried erasing the PRAM and still won't reboot in either mode. I would greatly appreciate any help I can get! Thanks! I love Apple. I am not bashing them, I just don't appreciate their software messing up my lappy.

    Have you tired a SMC reset?
    support.apple.com/kb/ht3964http://
    Also examine this article for possible remedies:
    https://discussions.apple.com/docs/DOC-3353
    Consider reinstalling the original OSX.
    You may eventually 'bite the bullet' and make an appointment at an Apple store genius bar.
    Ciao.

  • Since recent upgrade to win 8 from 7, HP printer will not accurately print from Photosmart 7.0.1. ?

    Is there an update to correct this?

    Seems like your question would be better in an HP forum than Adobe.  Photosmart is of course not an Adobe product.  Have you checked the HP site for driver updates for your particular set of hardware?
    You haven't been very specific; perhaps if you provide more info about specifically what you have and what you're seeing go wrong someone will be able to help you better.
    I don't have a suggestion for you beyond that, but this is for others considering Windows 8:  It's never good to upgrade to a brand new OS in the first weeks after its release.  An OS is more than just software from the manufacturer - it involves support from hardware vendors.  No matter how many preview versions the OS manufacturer has released, device driver perfection (printer, display, storage devices, motherboard) ALWAYS lags behind the OS release.
    Right now apparently there are a number of known problems with Windows 8:
    With display drivers (people not getting good GPU support with ATI cards in Normal and Advanced modes, for example).
    With printer drivers.
    With storage drivers (I've heard of troubles with RAID controllers, for example).
    In the professional realm there's an old adage, born from long experience:  Never upgrade to a new Windows version until Service Pack 1.
    With Windows 8 there is the additional consideration (for those who haven't yet taken the plunge):  Carefully consider whether Windows 8 adds any return on investment (ROI) that you actually need. 
    Microsoft has taken off in a new non-pro direction with Windows 8 and has actually DEGRADED the desktop experience (presumably to try to herd us all over into the Metro/Modern realm).  It may be that the best idea would be to continue to use Windows 7 and wait until Windows 9 (or whatever they call the next release) to re-evaluate upgrade options.
    -Noel

  • Upgraded Imac to OSX Mavericks and now imac will not boot

    Any help on how to go back to previous OS or solve for this?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Since I upgraded to Firefox 6.0.1, Facebook pages will not load properly.

    I am using a Mac 10.6.6. Just updated Firefox this week. When attempting to connect with Safari, I am not having any loading issues.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Just upgraded to PS CS5 from CS3 and LR will not recognize CS5 as external editor

    I just upgraded from PS CS3 to CS5 then uninstalled CS3.  LR 2.7 is not recognizing PS (CS5) as the default external editor and I don't get the "edit as smart object in PS", "Open as layers in Photoshop", etc… options  when I right-click an image and select "edit in" as they are now greyed out.  I've tried to repair LR and reinstall but nothing makes it recognize PS CS5 as the default external editor.  Any ideas?  Thx in advance.

    I ended up reinstalling CS5 and that solved the problem with one exception.  It is now the default external editor and I have the option to export to PS as a smart object - However, I do not have the options to export to PS in layers or export to PS as Photomerge or Export to PS as HDR.  I did have these options with CS3.

  • After down load of Mavericks my macbook pro will not boot up.

    Will not boot after many trys of on and off.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Since I upgraded to OS X Mavericks the files on my home screen keep flashing.

    Since I upgraded to OS X Mavericks, my desktop screen will flash like it's going to shut down. All the files I have on my desktop screen will intermidiately flash about every 15 seconds or so. Any thoughts? My computer doesn't shut down and the screen I am working in is fine but something is going on. HELP!

    Sounds similar to what I was experiencing. If you use Google Drive, open Google Drive preferences and turn off "Show file sync status and right click menu". Should stop the aggravating crashes every 60 seconds.

  • My mac had it's original software re-installed by Apple.  since they did this, my airbook pro will not recognize my iphone in Itunes, and I cannot update the latest version of itunes, because it says I'm not running the latest version mac software????

    I my macbook pro will not recognize my iphone.  I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone  it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software.  When I go to update my software, it's telling me I'm running the latest version???  HELP!!

    you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to  run Iphone 5

Maybe you are looking for

  • Avoid repeating namespace declaration in xml output

    Hi all, I'm trying an IDoc -> XML File (specifically UBL-format) scenario, and it is working fine. But the resulting XML contains repeating namespace declarations for each element, instead of a "common" declaration at the root element. How can I avoi

  • Images on a Button in ADF pages

    Hi, We have 2 buttons created on Page when the page is auto generated from a Human Task. The labels on the buttons are "Insert" and "Delete". We need + (in green color) instead of Insert. and X (In Red Color) instead of Delete. The functionality of t

  • Problem with SUM () analytic function

    Dear all, Please have a look at my problem. SELECT CURR, DT, AMT, RATE, SUM(AMT) OVER (PARTITION BY CURR ORDER BY DT) SUMOVER, sum( amt * rate) over (PARTITION BY CURR ORDER BY DT) / SUM(AMT) OVER (PARTITION BY CURR ORDER BY DT) avgrt FROM select 'CH

  • How to add F1 help for a field on ALV grid

    Hi All, When we execute a program, the output is displayed using ALV grid. on the ALV grid, if we press F1 on a field, it should popup the help document. How to add F1 help for a field on ALV grid. Thank you all in advance.

  • Count number of spaces

    Hi, How do I count number of spaces contain in a varchar2 column? Thanks