Since I upgraded to the new Firefox, the Chat on Yahoo no longer works.
I upgraded to the newest Firefox for my Dell computer with Windows 7.
When I went to use the chat section of my Yahoo email page...the chat section will NOT work.
When I went back to the Explorer (instead of Firefox)..it works fine.
The new upgrade did something to the upgrade of Firefox.
John
Hi,
Please try changing the '''Options''' > '''Messenger Options''' > '''General''' between Small Window and Tab in Yahoo. The Tab setting opens the chat window in a new tab on the right side of the last tab. Also try a '''Ctrl''' + '''F5''' refresh if necessary.
Please also [https://bugzilla.mozilla.org/show_bug.cgi?id=713014 see this.]
[http://help.yahoo.com/l/us/yahoo/mail/ymail/chat/mltamchatwind.html;_ylt=AlehF46Uedgmac_RoI5SshYHPnpG Yahoo Mail Messenger Options]
Similar Messages
-
Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?
Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.
-
my ipod nano4th gen will not download the purchased songs in itunes v11. Just upgraded to mac 10.6.8-won't synch new songs since this upgrade. The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini usb port, but the itunes window does not say it is synching like it has before so whats the culprit? Techno virgin in distress!
PS - I added an iphone5 which is whay these upgrades happened so this synching to the ipod error is since the iphone began synching.I just learn in some post that the most common lapses in syncing is not checking if "sync music" in music section of the ipod is ticked. So double check if it is. Cheers!
-
I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. When trying to connect, it stays in the discovery mode and never connects.I have to try and pair them all over again. Then I get a message saying that my Mac Book Pro is not supported. Can anyone assist me in resolving this issue. It is an early Mac Book Pro 10 I believe. I purchased it in February of 2010.
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
Since I upgraded to the latest os my spotlight doesn't seem to work anymore and the headings across the to keep disappearing and appearing
I think I figured out Firefox, I went under Help > Troubleshooting Information > Reset Firefox.
I only have one account on my computer. Honestly I don't even really know how multiple accounts work. I've never played around with it. I already allowed Java - should I disable it? -
Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
I can CREATE the list but, the songs that I have played don't accumulate in the list.
I haven't changed the steps that worked for me previous to the upgrade.
I have no idea how to fix this and can't find mention of anyone else having a similar problem.
Any suggestions?Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
tt2 -
Since i upgraded to Yosemite, when importing photos to iPhoto, they no longer appear in the 'events' summary in library. Why is this and how can i amend?
The events may be incorrectly sorted. Try to sort the events by date, while in "Events" view.
Go to the "View" menu: Sort Photos > By Date > Descending. That should bring the most recent events to the top of the list. -
im trying to download podcast and it says preparing to download but nothing happens, since i upgraded to the io6
Stacey Lou,
All I can say is I am having the same problem on my 4th Gen iPod Touch, but not my 3rd gen iPad. Occasionally, the podcast app will work, other times, all the downloads get stuck on "Preparing to Download". No obvious solution has presented itself.
Illaass, none of the previous discussions I see in "more Like This" seem to cover this topic specifically.
Idle speculation: Based on the behavior I have noticed elsewhere in iOS 6, I am convinced what is happening is if you start the podcast download someplace with a crappy connection, all subsequent attempts to download the same file will hang. I have seen this in app updates that stalled due a bad connection. All subsequent attempts to update the app also stall, regardless of the quality of the internet connection. I have to DELETE the app and reinstall it to get it to work. Maybe something similar is going on here with the Podcasts app. Unfortunately, there is no easy way to 'delete' the podcast and then re-download it. -
Please can someone help!
SInce I upgraded to the maverick system, my macbook pro will not register my USB anymore.
Regards
SPHi,
Are you sure you don't have unpluged it, without ejected it before? -
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX
Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
Ever since I updated my Macbook Pro, the shortcuts on the F1-F12 keys no longer work. I used to press just the F12 key and I would be able to raise the volume, now it switches to the home page. I want the old shortcuts back and I don't know how to do that. Please help.
Ever since I updated my Macbook Pro
updated from what to what?
Suggest you try a NVRAM / PRAM reset, as described by Apple:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Since the Hotmail Watcher is no longer working, if I downloaded the X-notifier, would that work the same?
Maggie,
You currently have an open thread at [/questions/994827]. Please continue there. You are violating the [[forum rules and guidelines]] more specifically,
<blockquote> Create one thread and only one thread for each subject you want to discuss. </blockquote>
I'll be closing this thread! -
Since the update my password no longer works only on apple tv
Since the update my password no longer works on apple tv
Cute. I redid my apple password last nite and made it real simple. It worked fine signing in to the forum just now. When I use it to sign in on Apple TV I keep getting message. ' server not available'. I had gotten it to sign in earlier but netflix wouldn't play the movie. Just the previews. So I reset everything and tried to start over and I can't log on at all. So if you have any helpful suggestions I would be interested in hearing them. Thank you
-
After installing OSX Lion, the built-in camera no longer works. Solution?
After installing OS X Lion on a late 2010 MacBookPro, the built-in camera no longer works. Worked beautifully with Snow Leopard. Reset SMU to no avail. Any solutions?
Hi, Thanks for the reply, I really appreciate your help with this.
Yes to both questions: iMovie is in the Applications folder, not in any subfolders. And I have reinstalled iMove from the original disc (before and after the OS reinstall) but can only get up to 7.1.4 without buying a later edition of iLife.
The camera definitely worked under Snow Leopard but not since I upgraded from SL to Mountain Lion.
Found the following on this forum:
If you have iLife '09 or older, there have been no iPhoto 8, iMovie 8 or
Garageband 5 (or older) updates relating to Lion or Mountain Lion. The
support and compatibility situations for those versions is unknown as
Apple hasn't said anything. We can only determine compatibility
anecdotally. If it turns out that there is a problem and Apple doesn't
release an update, your only recourse is to buy the latest version of
the application.
I reinstalled some other iLife apps as well. iDVD went missing after the ML reinstall. When I reinstalled it from the original disc, it wouldn't open and I had to download a manual update to get it working. iWeb previously stopped working after the upgrade to ML (all the menu options were greyed out) but when I reistalled it (together with iMove and iDVD) yesterday, it started working again.
All this seems to point to a compatibilty issue between iLife '08 and ML.
Maybe you are looking for
-
External Display won't work in clamshell mode
Hi - I can't get my external display to work with the MacBook in clamshell mode - It works fine with the lid open. I'm using it with the apple bluetooth keyboard and mouse. I've obviously changed a setting without realising - can anyone help. Thank Y
-
I need a new computer and am looking for some direction
I have the CS5 Premium Suite and do not have the 3D capability on my current computer. I am a PC user and was hoping someone would educate me on what desktop computer I should investigate. Thanks for helping out a newbie!
-
What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed
-
Recover Accidentally Deleted Files in OS X via Terminal, "command not found"
Hi! I am trying to recover a folder from the trash. It was deleted 30 min ago. The command I am trying to use is; Mys-MacBook-Pro:~ storedisk$ com.apple.Finder AppleShowAllFiles true And the response is; -bash: com.apple.Finder: command not found Whe
-
My scenario is file to Idoc and we are using multiple receivers.
Whenever we executes the scenario, getting the error u201CATTRIBUTE_IDOC_METADATA u201Cin sxmb_moni Any suggestions on how to do solve this?