Since I've updated my computer 2
Since I've upgraded my 2.4 GHz Intel Core 2 Duo laptop to Mac OS 10.7.2, I've lost the arrowheads used for fine tuing of page position in Pages '09. The page typically now skips from lower part of preceding page to upper part of subsequent page. I can't position the page where I most need it. Can I get those arrowheads back?
you might find your answer quicker in the Pages forum. Good luck.
Similar Messages
-
Since the last update my computer doesn't open iTunes anymore, help me please
I tried these of things,
- restarted my computer
- deleted itunes and reinstalled it
- deleted and reinstalled again
help me please!Can you check something for me please?
Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
Now try to launch iTunes.
Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)? -
Updated my computer and will not show any images or documents unless they are on desktop only HELP!
Since I have updated my computer I can not find any images that I have saved in the past unless I have saved them directly in a folder on the desktop. I have tried searching all files and it only shows what I have on my desk top. Any help would be great!
You've tried charging from a wall outlet?
My Ipod Will not charge on any usb or devices and wont connect to anyones computer
It may need a new battery > Apple - Support - Service Answer Center
edited by: cs -
I for the first time since buying my iphone and ipods for almost three years am concedering getting rid of them as I am getting tired of this problem. I can sync anything from my computer to the iphone. I can not sync movies bought on the iphone to my computer. I have tried everything and spent days trying to trouble shoot. I literally have bought hundreds of movies off Itunes but will not buy any thing else until I can figure this problem out. I have uninstalled Itunes reinstalled, troubles shooted using the itunes trouble shooter and reset my phone and nothing works.
When I try to sync from my phone to the computer it says it can not be done because the iphone is not hooked up to the computer. I have only had these problesm since the new update not before. I have bought new cables twice to see if it helped and has not. Both my kids have Ipods, I have a Iphone and was planning on buying two Ipads for the kids for Christmas but not if I can fix this.You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
-
Since my last update with itunes June 17, I can no longer sync my pictures on my phone to my computer Can someone help?
Do other irems sync to the iPod?
If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does the iPod in in My Computer?
If yes canyo see the photoe in the DCIM folder in My Computer>iPod>DCIM?
Other uses have reported the same problem -
Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
Exception Name: NSInvalidArgumentException
Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
User Info: (null)
0 CoreFoundation 0x922216fb __raiseError + 219
1 libobjc.A.dylib 0x920108db objc_exception_throw + 230
2 CoreFoundation 0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
3 CoreFoundation 0x9216af77 ___forwarding___ + 487
4 CoreFoundation 0x9216ad22 _CF_forwarding_prep_0 + 50
5 iTunes 0x00df38e2 iTunes + 14624994
6 iTunes 0x00df36ae iTunes + 14624430
7 libobjc.A.dylib 0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
8 Foundation 0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
9 Foundation 0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
10 Foundation 0x93c137c2 __block_global_1 + 156
11 libdispatch.dylib 0x9371b2cf _dispatch_call_block_and_release + 15
12 libdispatch.dylib 0x9371ea80 _dispatch_client_callout + 46
13 libdispatch.dylib 0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
14 CoreFoundation 0x9211b255 __CFRunLoopRun + 1829
15 CoreFoundation 0x9211a7c4 CFRunLoopRunSpecific + 308
16 CoreFoundation 0x9211a67b CFRunLoopRunInMode + 123
17 HIToolbox 0x90b6fc76 RunCurrentEventLoopInMode + 242
18 HIToolbox 0x90b76eb9 ReceiveNextEventCommon + 374
19 HIToolbox 0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
20 AppKit 0x97621923 _DPSNextEvent + 709
21 AppKit 0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
22 AppKit 0x9761d78c -[NSApplication run] + 855
23 iTunes 0x0017a898 iTunes + 1546392
24 iTunes 0x0017a709 iTunes + 1545993
25 ??? 0x00000002 0x0 + 2Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
My computer was just updated to a higher speed connection and was doing good speed wise even before. Now it takes forever to load or navigate in all capacities, that is until I got to this site and I can click as fast as I can here and there is no slow down. Will go back to my home page and see how bad it is there. My wife has a Mac laptop and she even said that since the new update, Fire Fox has been running a little weird concerning the opening of a new window unexpectedly. Really want to see if there is anyone else that might be having similar issues with their computers after the new update.
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Since the last update, I am not able to access my itunes music on my computer. Help
Since the last update, I am not able to access my itunes music on my computer. I have an error message, The song could not be used because the file could not be found. Would you like to locate it. HELP!!
1.10.6 works in Yosemite, I suggest removing it and installing a new copy, from the App Store or from Amazon. They both work.
-
I haven't done an update since 24.0 because my computer is running out of memory. How much MORE memory will I need to get up to version 28.0?
My computer is really old.
It is running out of memory.
I haven't done a firefox update since 24.0 because I think it will explode my computer.
I see that v28.0 takes 200MB.
How much more is this than what is already loaded for my v24.0?
Will it just add the extra pieces, or will it require a free block of 200MB (which my computer does not have)?
I don't want to crash and lockup my computer because I try to install something that is too big for the remaining memory.
Thanks.You should updated to Firefox 28, Firefox updates don't take any new space they just replace the existing files.
There are some things you can do to clean up your hard drive to free up space however, http://arstechnica.com/civis/viewtopic.php?p=21178060 and http://support.microsoft.com/kb/956324, also uninstall programs you don't use anymore and delete files you don't need anymore.
You should also start saving up for a new machine, Windows XP is being dropped from support by Microsoft in a few days, which means it will no longer be safe to use on the internet. -
I downloaded your update sent about 10 minutes ago. Ever since I did so, my computer started freezing up for a few seconds, and then it starts going again. This is annoying!!!!!!!!!!!!!!!!! Do something to fix this. It started happening with your update.
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
My camera profiles (standard, landscape,etc) are missing (under camera calibration) since I've updated to 5.6. I have a canon 6d and my computer is a mac. How can I get this profile back?
Please upload one of the files to www.dropbox.com and post a public share link in a reply, here.
Show us a screenshot of the filename in LR that includes the extension of the file.
Right-click on one of these files and do Show in Explorer, then show us a screenshot of the files in the folder that includes the extensions--maybe a Details view. -
I have not backed up my computer using Time Machine since before I updated to Mavericks. It has been "preparing backup" for a half hour at least and shows no indication of how long this may take. Is something wrong?
No. TM has to look through your entire drive contents and copy them all. This will take some time.
Once the first backup is made, then subsequent backup will be much quicker, depending on how much data has changed since the last one. -
Video iPod keeps crashing since latest firmware update
This has happened to me several times since the last update. Playing certain podcasts will cause the ipod to crash and reboot. Worst case was today. I had 4 unplayed episodes of the podcast 'Universe Today'. I clicked on one, the iPod crashed, rebooted and when I went back to that podcast directory 3 of the 4 episodes were gone (no longer listed) and the 4th was an empty file. All episodes play properly in iTunes. Very frustrating! Since I don't play games on my iPod, I guess the next step is to restore it to a previous rev.
20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display) Mac OS X (10.4.7) All tools, no talent!Hello there Xpectro,
Thank you for asking your question. It sounds like after you upgraded to Mavericks the computer started quitting unexpectedly. I would start by checking the disk for errors with the Disk Utility and repairing any that are found.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
If the issue persists or the no errors are found I would try resetting the SMC and performing a Safe Boot in that order.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The instructions are different depending on the type of MacBook Pro you have.
and
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564?viewlocale=en_US
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Crashes ever since latest software update
Ever since I downloaded and installed the latest Apple software updates to my computer (Mac OS X 10.4.9 if I remember correctly, and whatever are the most recent updates to iTunes, QuickTime, and Backup), I've been unable to open Mail. Every time I try to launch it, it crashes and gives me the message "The application Mail quit unexpectedly." The only things I've changed in my computer since the last time I was able to use Mail have been those software updates. Has anyone else had this problem? Can anyone suggest ways I can fix it?
Problems arising right after installing a system update are usually the result of some filesystem corruption that should have been fixed first, or not having installed the update properly (e.g. applications running while installing it), or having ignored Apple’s “Important: Please read before installing” warnings, etc.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the update using the combo installer:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PowerPC
Mac OS X 10.4.9 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
<hr>
The above may or may not solve the problem, but will allow us to at least troubleshoot it properly. Post back with your observations when done. In particular, does Mail crash immediately or when it starts to download messages.
If Mail crashes immediately upon start up, the cause could be a troublesome message that Mail tries to load every time you open it. Try launching Mail holding the Shift key down until the main window appears. This tells Mail to not select any mailboxes or load any messages upon start up.
If Mail crashes when it starts to download new mail, try the following to check whether the junk filter could have a bearing on it and post back with your observations:
1. Either tell Mail to go offline immediately after opening it, or shut down your Internet connection and open Mail afterwards.
2. Go to Preferences > Junk Mail and disable junk mail filtering.
3. Go online again. -
Wifi issues with iPad mini since iOS 8 update
I Have a First Gen iPad Mini now running on iOS 8.1 . Since the original update of IOS8 . I have had issues with Wifi it connects disconnects itself always looking for a signal.. Nerve had this issue before update of the new IOS 8. It's extremming slow and the apps and Safari keep crashing.. It becomes unresponsive unable to click on website . It also freezes .. I've have numberous times done a complete factory reset . Still having issues. I have reset my router and I don't have any issues with any wifi at the house. I do have a iPhone 5 that had the exact issue as my IPad mini but it was replaced under warranty via Best Buy. When I reciecevd my iPhone it was still operating on IOS 7 . The gentlemen at Geek Sqd told me to NOT to upgrade the software till Apple gets a fix.. They had a lot of people in with the same problem and there devices needed to be replaced. My last resort would be to go to the Apple Store and hopefully they can help or buy a new IPad. As far as the new iPad Air2 I have seen here they too are having issues.. Hopefully Apple can fix this soon.. Till then I will not be upgrading my iPad if a new one will have the same issues..
My iPad Mini 32GB w/4GB free space is working OK.
Downloaded IOS 8.1 thru iTunes on iMac
Unplug cord from iMac
iPad
Reset all Settings
Reset Network Settings
Hook up iMac and iPad then trust computer
Computer accept iPad
Download Camera Roll pics to iMac
Complete iPad Auto download to iMac in iTunes
Sign on to iTunes
Log on to Wi-Fi
Unplug iPad from iMac and all is good so far after 2 hours.
Maybe you are looking for
-
Help with exporting an excel spreadsheet to sharepoint
I've downloaded the 'Synchronising with sharepoint lists' add-in and have linked my spreadsheet to a sharepoint list, where any changes made to the spreadsheet then updates the sharepoint list. This spreadsheet is full of formulas but as soon as I cl
-
Mountain Lion Software Update Server?
Let me start by saying that I am no server administrator, but was convinced that setting up a Mac Server on a MacMini would be relatively straightforward due to Apple's history and claims... Server app. Your own mini IT department. The Mac is famousl
-
Oracle Report Manager - Please help
Just a quick question for anyone familiar with this product. We have Oracle Applications/Financials 16.1, 10.7 SC and run on DG-UX. It looks like Report Manager is only available for NT and Solaris.... will the Solaris version work on the DG-UX platf
-
Question about Java Sound example?
Hello, I found this example AudioPlayer, when searching for an example of how to play .wav files in Java. The code seems quite long, and wondered if anyone could advise if this is the best way to play a wav file? And could anyone explain if the EXTER
-
Execute Shell Script through Demantra Workflow
Hi All , Can we execute shell script from Demantra Workflow ? If yes where should we place the shell script file and wat should be the commandline command in the step . We have the Demantra installed on a windows server and the workflow manager is on