Since installing Firefox 29, my router constantly reboots on its own

Since installing Firefox 29, my router constantly reboots on its own. Is anyone else having this problem? And could it indeed be caused by Firefox?

Do you have any security software that may undo changes and restore a previous setup?

Similar Messages

Fresh Install, Fully Updated Leopard Server Keeps rebooting on its own

Just upgraded to Leopard Server from Tiger.
Fresh, new install, fully updated.
Only software installed is Retrospect 6 and Drobo client.
My Server keeps rebooting by itself after 5-10 after logging in.
Won't reboot on it's own if I don't log in. The services are running in the background.
But once I log in as admin, after 5-10 mins, it will reboot on it's own.
Any ideas are where I should start looking on how to resolve this?

You're going to get to try to isolate this.
Any details from the crash report? (Applications -> Utilities -> Console.) Basically you're going to have to dig around in the crashes, and (if there's nothing obvious there) then, well, "try different configurations and different stuff".
This could be bad memory or a bad sector somewhere on the disk, for instance. Or a bad processor. Or a corrupt file. Or a bug in whichever Leopard Server baselevel is involved here.
Some steps and some options...
Disconnect all external hardware.
Run the hardware diagnostics for whichever box is involved here.
See if the box crashes if you log in as some other user.
See if the box crashes with no external hardware, or with no network connected.
If the box isn't under warranty (and any user crashes the box) (and if you're familiar with and comfortable with working inside static-senstive electronics gear), crack it open and reseat everything.
If the system is available to restore or you can blank and install, reinstall everything and leave both Retrospect and Drobo, and see if it crashes. Then add one or the other and see if that crashes stuff, rinse, lather and repeat.
Or you can call up Apple and ask for help.

My xi settop box is constantly rebooting on its own

for the past two days and nights the X! platform continues to reboot even during programsI'm in the 60423 area

Its frustrating .. it happens to me too.... strange thing is ... its only my box... grrrrr ! the not being able to rewind live tv isnt pleasing either !

Since installing Firefox 4, screen goes black when dormant and will not automatically reopen on first try.

Since installing Firefox 4, if I leave the computer (desktop with a Viewsonic VG1930wm monitor), the monitor will go to blackscreen...not the starfield screensaver. If I move the mouse, the screen will only momentarily go back to the last desktop...and then almost immediately black screen again. I typically have to turn the monitor on and off five or six times...and move the mouse each time, before it will stay open to the desktop. Any ideas?

Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem.

Since installing firefox my emails from yahoo will not print anymore. No error message just nothing

Since installed Firefox my emails from my yahoo will not print. There is not error message, nothing waiting to print. When I go to my AT&T emails they will still print. I will need to uninstall Firefox if you can't help me. Thanks. Pat

See this: 
http://kb.mozillazine.org/Problems_printing_web_pages

Since installing Firefox Sync my master password is requested randomly.

Since installing Firefox Sync my master password is requested randomly. is there a way of stopping this happening.

Somewhere around Firefox 29, Firefox changed how Sync accounts work. Please see this article for more information: [[How to update to the new Firefox Sync]]. If you can't do that in Firefox 33, you may want to install Firefox 29 temporarily to do the account change, and then update to Firefox 33. This article has information on how to find clean old versions of Firefox: [[Install an older version of Firefox]].

Ever since installing Firefox 4 beta, even on regular Firefox, I get the pop-up "Crash Reporter"

ever since installing Firefox 4 beta, even on regular Firefox, I get the pop-up "Crash Reporter": Add-ons: [email protected]:4.51,{CAFEEFAC-0016-0000-0016-ABCDEFFEDCBA}:6.0.16,{20a82645-c095-46ed-80e3-08825760534b}:1.2.1,{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}:6.0.20,{3f963a5b-e555-4543-90e2-c3908898db71}:9.0.0.872,[email protected]:1.1,[email protected]:1.0.4,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.13.

Are you using a nightly build or a beta? 
Did you create a new profile folder for that beta? 
You can see the crash reports in the "Crash Reports" folder in the parent Firefox folder of your profile folder.
Help > Troubleshooting Information > Profile Directory > Open Containing folder
See [[Profiles#How_to_find_your_profile|Profiles - How to find your profile]]
Linux: ~/.mozilla/firefox/Crash Reports

Since installing firefox i cannot access my hotmail or gmail accounts.

Since installing firefox i seldom am able to access my hotmail account and my gmail account. I can access my net zero account with no problems. What might be causing this.
== This happened ==
A few times a week
== When I installed Firefox about 3 weeks ago.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Since installing firefox update I no longer have a padlock displayed when on secure sites. Is this still OK?

Since installing Firefox update today, 11/11/2011, when entering secure web sites I no longer have the display of a padlock. I still have Https. I am wondering if the security of these sties is still OK.

The Statusbar is gone and the "lock" with it as of Firefox 4.0. Security information about a web page is shown by the Site Identity Button. 
The old padlock could give users a false sense that a site is secure by not supplying all of the information about a site and only showed that there is a secure connection that didn't guarantee that you are connected to the right server. The Site Identity Button was introduced in Firefox 3.0 to show more complete "identity" information for HTTPS web pages. 
https://support.mozilla.com/en-US/kb/Site+Identity+Button
You can add a padlock to the location bar with the Padlock add-on- https://addons.mozilla.org/firefox/addon/padlock-icon

Will CUCM reboot on its own after installing ciscocm.refresh_upgrade_v1.1.cop.sgn

I'm upgrading a server to 8.6 and i've installed ciscocm.refresh_upgrade_v1.1.cop.sgn.
These were the last couple lines from the console:
02/23/2012 23:08:48 killing copstart.sh pid=31809
02/23/2012 23:08:48 Waiting for CLI/GUI to show cop install success before terminating all CLI/GUI sessions
02/23/2012 23:08:48
SUCCESS: Successful install of refresh_upgrade_v1.1. All GUI and CLI sessions will terminate shortly. Tomcat will be restarted, which can take several minutes.
02/23/2012 23:08:48
Successfully installed ciscocm.refresh_upgrade_v1.1.cop.sgn
A system reboot is required when the upgrade process completes or is canceled. This will ensure services affected by the upgrade process are functioning properly.
admin:
Broadcast message from root (Thu Feb 23 23:09:04 2012):
*** Warning: Terminating all CLI sessions NOW ***
Will the server reboot on its own, or do I need to manually initiate a restart myself?

Hi Michael,
Aaron is most correct here (No doubt +5)
The final reference you are seeing via the cli output;
A system reboot is required when the upgrade process completes or is canceled. This will ensure services affected by the upgrade process are functioning properly.
is in relation to the actual 8.6 upgrade process, not the refresh.cop
The details are in this great doc from Ryan;
https://supportforums.cisco.com/docs/DOC-16898
Cheers!
Rob

Ultra not booting, reboots on its own, display - possible solution for all.

I had a problem for a few days where my Ultra 24 would stop (the screen would freeze for a sec), the fan would make a lot of noise and the PC would reboot on its owns. Sometimes it would be on a loop or not start up at all.
I perused through these boards and saw other people with similar issues and solutions. (Mine was to take out MB battery and reset bios).
This fixed the problem but it eventually came back at least once a week.
Anyways after calling Sun and spending a lot of time on the phone I determined that this is related to the graphic card. You'll notice that the nvidia driver these workstations come with are really outdated drivers (mine was the quadro nvs 290).
After I updated the driver (05/08) the problem has gone away and graphics perform MUCH better.
I am running running Solaris 10 and XP.
Hope this helps some of you out.
Edited by: Rhuobhe on Jun 24, 2008 1:24 AM
Edited by: Rhuobhe on Jun 24, 2008 1:24 AM

We have a T-Mobile corporate account with several of these 8120's. We have had them since mid-July and now 3 out of 10 of them are having the reboot issue as well. We, however, do not have or use any memory cards in them, so I don't think that is the problem either. We've reinstalled the software (they had the same version as the newest already installed) as tech support has suggested, and still the problem happens. It happens sometimes when the phone is idle, but most of the time they reboot during a conversation. This is quite annoying as they are business phones and it takes 3-5 minutes for the phone to complete the reboot process. Any help on this would be greatly appreciated.
Message Edited by ridbidge on 09-18-2008 03:34 PM

MacBook doesn't reboot on its own, but will from Startup Manager

I have an early 2009 13" MacBook Pro running Snow Leopard. About a week ago I attempted to use Boot Camp to install a Windows partition, and for reasons that don't matter to my current problem, I gave up on that and used the Book Camp Assistant to remove the Windows partition and return to a single Mac OS partition.
Since then, if I reboot the machine and just let it reboot on its own, it will stop at a black screen that says "No bootable device -- insert boot disk and press any key". I have to power off the machine to reboot from this point.
However, if I reboot the machine and hold the Option key to get the Startup Manager, my hard drive will be shown which I can then select and it will boot Mac OS like normal. After that it will run like a champ.
Any idea how to fix this short of a fresh install?
Thanks in advance for any assistance!

Glad to help.
Captfred

Droid X2 rebooting on its own

My Droid X2 keeps spontataniously rebooting.
As you might imagine, this is a bit annoying. it MIGHT be because of the Amazon cloud player, but it rebooted this AM when I tried to fire up the camera, and it's done that afew times before, also when I tried to open the gallery application.
It rebooted any number of times yesterday but it was running very hot as it was downloading files over the 3g.
Is anybody else having this problem?
--woody

It really sounds like you have a rogue 3rd party APP causing your problems. Are there any common APPs that you & your son installed? Can you put your finger on roughly when the issue started - or has this been going on since day 1 with the phone? When you say it happens "a lot" - and assuming by that you mean at least several times a day - I would boot into SAFE MODE and run for an extended period of time, just to see if the problem goes away. if it does NOT reboot on its own, you probably have a 3rd party APP causing your grief. Other options? Just make a list of your APPs and then start Uninstalling them from last-installed date - maybe groups of 5 at a time, then test for a while. A Factory Reset - but turn OFF the automatic reinstall of your Apps.
Let us know if you can't find the procedure to do either of those & we'll direct you to the instructions. (Try SEARCH bar just above).
Oh, and welcome ... good luck.
edit: Here's SAFE MODE process per Wildman's post up above : http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=43641

Why does my mac reboot on its own?

Why does my mac reboot on its own?

Oh den.thed... I saw your post this morning and I was so excited.... ran to the Mac and got to Energy Saver, and... the checkbox is already unchecked.
Long story, I'll make it short. Just got the Mac back after having the HDD replaced. (It stopped working after less than 500 hours.) This rebooting thing has been happening ever since I got the computer in 2010, and I was hoping it would coincidentally stop happening after having this crashed HDD replaced last week. No such luck. Still doing it, even after getting the computer back from Apple. Two of my kids have macbooks, have used the cr*p out of them, and have had very few problems (nothing big). I bought this Mac, to replace a dead Dell desktop that got very little use, and so far I am not sure I did the right thing. Really wish I could get this "automatic" rebooting thing fixed. (Reboots with no notice, while doing normal tasks - internet, word docs, etc.) Thanks again for your help. Let me know if I should try anything else.

Standby ACE20-MOD-K9 reboots on its own

Hello Everybody,
I am experiencing the following problem:
I have 2 Cat 6509-E switches in VSS configuration with 2 ACE modules. One in each Cat6k.
The ACE modules are running the following:
Software
loader: Version 12.2[120]
system: Version A2(3.2a) [build 3.0(0)A2(3.2a)]
We have only 2 contexts, the Admin and another one that we redirect traffic to WAAS equipment. The ANM soft running is only used for stats about the ACEs. It is version 5.2.
Since last week, the standby ACE module reboots on it own. It rebooted between 10 and 15 times until we had to leave the module PwrDown due to the constant reboots.
I tried to find any bug in the soft but I could not find anything related to that.
Had anyone has this problem? Or is aware of a bug? Or what tests should I run to discard a hardware problem/software problem?
thanks in advance for your help
Fernando

Hello Fernando,
Basically, you may need to collect a #show tech-support and also the core dumps files and open a TAC case then we can decode the core dumps to provide you with the software defect which affected you.
Here you have a link about getting the core dumps:
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_(ACE)_Troubleshooting_Guide_--_Overview_of_ACE_Troubleshooting#Copying_Core_Dumps
Jorge

Since installing Firefox 29, my router constantly reboots on its own

Similar Messages

Maybe you are looking for