Since installing Firefox 4, screen goes black when dormant and will not automatically reopen on first try.

Since installing Firefox 4, if I leave the computer (desktop with a Viewsonic VG1930wm monitor), the monitor will go to blackscreen...not the starfield screensaver. If I move the mouse, the screen will only momentarily go back to the last desktop...and then almost immediately black screen again. I typically have to turn the monitor on and off five or six times...and move the mouse each time, before it will stay open to the desktop. Any ideas?

Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem.

Similar Messages

  • How can I fix my iPod that the screen shows the apple logo then goes black then back and will NOT connect to iTunes?

    I turned off my iPod then turned it back on. The normal apple logo appeared on the screen but then it went black and it won't connect to my iTunes. What should I do and what are my opptions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Since upgrade, my ipad screen goes black

    Since upgrading my ipad2 to version 7.1 my screen goes screen goes black very often and I have to return to whatever I was doing and start over. Saw various online discussions and they advise restart or change settings and that doesn't help.  PLEASE anyone.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
    http://support.apple.com/kb/ts1827
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • N95 screen goes black when in between open and clo...

    Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia. 
    Nokia 808
    Nokia CK-200

    Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
    Scott lets hope for the best :-)
    What's Worth Doing, Is Worth Doing Well!
    All "N-series" are incredible!

  • Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse  thanks for your help Dave

    It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

  • My ipad screens apple picture keeps blinking and will not open

    my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?

    Hello llp03,
    Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    - Connect the device to your computer and open iTunes.
    - If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    - If the device doesn't appear in iTunes, try to force the device into recovery mode.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks,
    Matt M.

  • Monitor goes into sleep mode and will not wake up

    My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

    Hello @rosendahl14,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
    To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My web screen is frozen (grey shaded) and will not let me close out page.

    my web screen is frozen (grey shaded) and will not let me close out page.  4 pages open now.

    Tap the home button to go to the home screen. Then go to Settings>Safari>Clear history, Cookies and Cache. Restart the iPad. Hold down on the sleep button until the red slider appears and slide to shut down. then press the sleep button and hold until the Apple logo appears. Let go of the button and let the iPad boot up. Try Safari agin.

  • My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

    If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter.  You will have a window with the users to choose from to reset the password.  Select the one you want and you will be able to reset the password, double entry of course.

  • Screen goes black when hooking up to TV via mini-DVI to video adapter...

    Hello,
    Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
    Anyone have this issue? Know of a fix?
    Thanks,
    Kristin.

    If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
    If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • Satellite L405D-11V - Freezes and screen goes black when watching video

    Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
    I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
    However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
    Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
    Thanks

    Hi buddy,
    Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
    What operating system you are using on your Satellite L405D?
    To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
    In my opinion you should try updating the display driver. Maybe its causing the issue
    If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
    If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
    Explain your problem very detailed. I think everything can be clarified then. :)

  • Screen goes black when playing "Tiger Woods PGA Tour 08"

    No need to mention that I am very happy with my new iMac. It replaces my G4 MDD PowerMac. The iMac is huge, quiet and fast on my graphic design jobs. I even won´t want to miss the glossy screen.
    Yesterday I received the brand new "Tiger Woods PGA Tour 08". Keen on trying the game I installed and successfully created a player and got first practice shots but as soon as I try to actually start a game scenario, it appears that the scenario just only loads about 90 % and then screen goes black. From there I can only shut down my iMac with the power switch.
    Now I found a support note on the EA Games Site. Title: "Why does "Tiger Woods PGA Tour 08" lock up with a black screen when playing on an iMac 7.1?" Answer: "This is caused by a driver issue with the video card that will be adressed by next system update by apple later this month."
    Question: is this indeed so? Can I expect a system update soon? Anybody there with the same problem?
    P.S.: I checked if I could run the game with a new user. Same problem.
    Thanks for help.

    Thank you for replying. There are more postings in this forum about that issue. I.e. gamers trying to play Unreal Tournament suffer from the same freezing on the new 24" iMac. Have a look as well at the reviews in the US apple store on this game.
    Solution is near. Installing 10.5 Leopard should solve the problem. As I do not want to install Leoprad yet, because some of my graphic apps will not run smoothly on leopard I have to wait for the next update for Tiger 10.4.11
    Obviously EA Games is to blame and failed to test the game good enough before hand.

  • My laptop screen goes black when i plug in an Hdmi cord

    Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in the graphics options as my laptop screen went black. I unplugged the hdmi cord from my laptop and the screen came back up. But now for some reason everytime i plug in the hdmi cord to the laptop the screen goes black. When i take it out it the screen comes back up. Did i change something that is causing this to happen? Any help would be greatly appreciated. Thanks

    I have pretty much the same exact problem and setup as DaveA1.  I have a Toshiba Satellite Laptop C55T-A5123 which I just purchased a few months ago and when I connect my laptop to my SONY TV via the HDMI cable the screen on my laptop goes black and the TV says no signal.  It was working just fine up until about a week ago when I was watching a movie through my VLC player and then the screen flickered a couple times then video went completely out and I've never been able to get it to come back even once.
    Here's the specs on my laptop:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16834114907
    So far I have tried on two different TVs, swapped HDMI cables which work on my other HDMI devices, system restore and attempted to update various different drivers.  I am curious to find out if Dave was able to find a solution to his problem.

  • PB screen goes black when TV is plugged in

    I occasionally plug my PB G4 12" into the TV using the Video Adapter. This used to work fine - the desktop would span both TV and PB screen, just as it does when I have my external monitor plugged in.
    But when I upgraded to Leopard this stopped working - when I plug the TV in, the PB screen goes black 90% of the time. And when I unplug the TV the PB screen stays black - I always have to shut the laptop down while the TV is plugged in and start it up once the TV is unplugged. But the PB still works fine when I plug an external monitor in.
    Any ideas how to make this work again? Thanks.

    Hi MrEleffe,
    Welcome to the support community!
    To fix any possible software issue that may be causing this to happen, please try to first back up all your data using the BlackBerry® Desktop Software and then perform a clean reload of your BlackBerry® Device Software. For further steps, please see the following KB articles.
    For Windows®:
    "How to back up BlackBerry smartphone data using BlackBerry Desktop Software for Windows" KB12487
    "How to perform a clean reload of the BlackBerry Device Software for Windows" KB11320
    For Mac:
    "Back up and restore BlackBerry smartphone data on a Mac computer using BlackBerry Desktop Software" KB18776
    "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" KB19915
    Please test to make sure the issue has been resolved before restoring your backup file.
    If that doesn't help, then the issue may be hardware related. In that case I recommend contacting your mobile network provider again for other options.
    Please let me know how you make out with that.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Screen goes black when making phone calls

    Hi, I have started to use a new Xperia Z2 a short while ago. As soon as I am tapping the screen to call a phone number the screen goes black; I can hear the phone calling but can't see anything (not being able to turn on loudspeaker etc.). The sound works, and screen can be brought back to life when the call is finished. Same thing when I call with my Skype app - really annoying as the video mode in Skype doesn't function. When the call is finished from the other side, I can get the screen to light up again. What can I do to solve ths problem?

    Hi.
    I've got very simillar problem with Xperia Z2 screen.
    Not always, but very often when I want to end the conversation and take the phone away from my head, screen remains black.
    Only power button can help, when I click it, screen pops up and then I can click "END CONVERSATION"
    It's really annoying. What can I do, to make it work ?
    Answers for your further questions.
    - I don't have any protection on the screen
    - I don't have any case or anything
    Android 4.4.2
    Compilation number: 17.1.1.A.0.402
    Thanks

Maybe you are looking for