Since iOS 7 update apple tv screen on ipad stuck in portrait mode

Since ios 7 update Apple TV screen on iipad stuck in portrait mode. How to unlock?

Do you have orientation lock turned on on the iPad?  You would see a little lock with a clockwise arrow going around it near the battery symbol on your iPads screen.

Similar Messages

  • HT201263 Just installed iOS update 7.2 and now iPAD 2 in Recovery mode?

    Any ideas, iTunes not recognizing the IPad to do a restore?

    Sorry... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >   http://support.apple.com/kb/ht4097
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Who can fix my Ipad 3 because it won't charge since IOS update?

    Ipad 3 won't charge since IOS update, who can fix this expensive item?
    Thank you

    Try a different electrical out.
    Make sure you are using the same power adapter and cable that came with the iPad.
    And try charging via USB to a computer.
    If nothing above helped, reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, restore the device > iTunes: Restoring iOS software
    If nothing above helps, take your iPad to an Apple Store or Apple certified repair provider > Apple - Find Locations
    message edited by: cs

  • Since iOS 8 and subsequent upgrades my iPad air keeps kicking me off wi-if if Apple are aware why are they not fixing the **** thing. C'mon Apple up your game and look after your custome

    Since iOS 8 and subsequent upgrades my iPad air keeps kicking me off wi-if if Apple are aware why are they not fixing the **** thing. C'mon Apple up your game and look after your custome

    Everyone here is an end user like you, not Apple representatives. To report to Apple, please use this link:
    http://www.apple.com/feedback/ipad.html

  • Apps won't open since iOS update-why?

    First time I tried to open apps since the update, and the screen just kind of flashes for a second and nothing happens. Has this happened to anyone? I can open all the apps that showed up with the update, but none of the others.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT201210 I tried to update my iPad 2 with the iOS 6.0.  Now I am stuck in restore mode and keep getting an unkown error 3014 and sometimes -1.  What in the world can I do?

    I tried to update my iPad 2 with the iOS 6.0.  Now I am stuck in restore mode.  I get "unknown" errors 3014 and sometimes -1.  Any ideas?

    Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

  • Since I updated to latest software on ipad cannot sync. with computer.  Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.

    Since I updated to latest software on ipad cannot sync. with computer.  Makes it to step 7 however says 'waiting for changes to be applied' and never completes sync.
    thx for the help,
    Tony

    Hello Marcia,
    Sorry you are having trouble syncing content with your iPhone 5. I found an article that might help with this syncing issue:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/TS3219
    Also, you can delete the songs from the iPhone without syncing by just swiping from left to right over the song to get a delete button. 
    I hope this helps!
    Best,
    Sheila M.

  • Ipad stuck in recovery mode after accidentally unplugging it while updating

    ipad stuck in recovery mode after accidentally unplugging it while updating to ios 4.2 . and when trying to restore it back it wont restore, restroing error code is 6 what to do ?

    I'm not sure what you can do at this point.  If I had been in your shoes, I would have kept the pics in the camera's SD cards until my return home.
    I'm really reluctant to suggest this but, at this point, you probably can't lose.  Do a "Restore."  Be forewarned that it could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    Edit...
    I just took a peek at the TinyUmbrella FAQs.  Your device has been jailbroke and that's likely the reason why the problem occurred to begin with.  Contact the jailbreaker for assistance.  Neither Apple nor anyone on the forum can help you as we do not know the characteristics of your device.

  • Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

    Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
    Or any other suggestions please? Thanks

    As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

  • My ipad2 is stuck in portrait mode after iOS 7.0.4 update. How do I get it to rotate again?

    My ipad2 is stuck in portrait mode after iOS 7.0.4 update. How do I get it to rotate again?

    Try following the instructions in this thread:  http://discussions.apple.com/message/23028588#23028588

  • IPhone 5 stuck in portrait mode after upgrade to iOS 8

    iPhone 5 stuck in portrait mode after upgrade to iOS 8.
    Phone was fine before the upgrade, iOS 8.1 did not fix the issue.
    Have done a factory reset at Genius bar and they say it's a hardware issue and have gotten this response below:
    "Now, when you perform an update to any iOS device many system checks are run to verify that all components are working as they should. This is part of the firmware update process. When these checks are run sometimes issues are detected, even if all seemed to be running well previously. When this happens one of two things can occur. Either the hardware will be deactivated completely, or it will be locked in a state of use so that the device can still be used. In the case of the gyroscope for screen rotation, the firmware locks in place so that while not perfect, the device can still remain on some functioning level. This is what appears to have happened when you updated. The software itself did not cause any failure, but it detected a currently upcoming issue and prevented it from becoming worse."
    All I want is a replacement but they want me to pay £199 since it's out of warranty.
    Anyone have the same issue?

    If the device is out of warranty you must pay the out of warranty replacement fee to have your iPhone replaced. If the phone was still under warranty the phone would have been replaced at no charge.

  • Error 16 when I update my iPhone 5s showed me stuck on recovery mode and whenever I got error 16 Restore thing is the problem?

    Error 16 when I update my iPhone 5s showed me stuck on recovery mode and whenever I got error 16 Restore thing is the problem?

    Hello Meysam321,
    After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Resolve iOS update and restore errors - Apple Support
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

  • IPad stuck in docking mode

    Hi community, hi all,
    i have a problem with my iPad (first ... sry for my bad english ... i'm not a native speaker).
    Following issue:
    My iPad stuck in Docking Mode. Means i get no access to volume keys or to volume bar in the multi tasking section. The volume bar there is empty. So my iPad doesnt play any sound ...
    But when i plug in earphones or when i connect my iPad to a bluetooth speaker sound is playing. And when i plug in the iPad into the docking station and pull it off (plug out... doesnt know the word).... then sound comes out of the build in speakers for about 1-2 seconds ... afterwards iPad return into docking mode and sound is away.
    What i have done ....
    ... i rebooted
    ... i hard reseted it
    ... i do a factory reset
    Nothing work... but it seems to me like a software failure... dont know.
    Next issue is that i have no warranty left for exchange at an apple store...
    Any ideas from you?
    Thanks for any response.
    best regards

    I had resolved this issue by myself.
    I thought long time about it... and then i got following idea.
    I thought ... mybe there is something in the connector which think ipad is already plugged into a docking station.
    This helps me....
    my idea was .... another product with another behavior to the iPad. So i take my iPad Camera Connection Kit... i stuck it into the connector leave it for several minutes ... and removed it.
    My iPad turned back in normal mode ... All god. My internal speaker works again. Wuhuuuuu ... Maybe this solution would help somebody.
    br
    f2107

  • My iPad stucked in recovery mode

    My iPad stucked in recovery mode, while upgrading at the end of firmware upgrade step an unknown error occured ( 1 ) and still I'm getting the same error in all my trials, any solution ?

    Hi kweks,
    Have you backed up your iPad to iTunes? If you have, then even though a restore will erase your data, you can restore it from a previous backup:
    When using recovery mode, you can only restore iPad. All user content on iPad will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
    GB

Maybe you are looking for

  • How to stop Pages v. 5.0 from automatically formatting font

    Hello everyone, I've found after I've updated to OS X Mavericks and updated my Pages to version 5.0 that upon pressing return, Pages automatically copies the format from the line above. So, if I have a title in bold/itallic or underlined, it will mim

  • How do I add an Ouput Channel in LOGIC X

    how do I add an Ouput Channel in LOGIC X?

  • How to restrict the posting document from the parked user

    Hi All, Please help me in the below requirement The requirement is, need to restrict the posting of document by the same user, who has parked the document. For this I did the code changes in BTE: 00001140 by copying the function module: u2018SAMPLE_I

  • What is the "page" used for?

    I cannot find any information in the RoboHelp for HTML help that explains what a "page" is for, and why I would want to use it. Can anyone point me in the direction of an explanation of why you use pages? I suspect that the use of the page may help m

  • Unable to view emails on my talktalk account

    since installing firefox 5.0 I am unable to view my emails from my provider talktalk there web site states they are trying to resolve but it has been several days since this message appeared how do I go back to firefox 4.0