Since iOS 8, Siri hangs up while making a call through bluetooth in car

Since we got ios 8 on my 6plus, and my kid's 5s, we can use Siri to request directions and such through my 2008 Toyota Prius' bluetooth, but if we ask Siri to make a call, she says she'll do it, she begins to do it, and then hangs up the call immediately.
Anyone know of any workaround or fix? Is this some kind of ios8 bug?
Maps will give directions over the bluetooth, whether it's Apple Maps (once I changed the setting) or Google Maps.
I can make phone calls, receive phone calls, dial from the car's dashboard, or dial from the phone. I can also redial from the car dashboard, leading me to think it's the hands free profile (not headset profile) that is in use.
I don't think my car has the A2DP profile for streaming audio (for example from iTunes). but that shouldn't matter.
I did try asking Siri to make a call on a bluetooth wireless speaker (has A2DP ) that also supports phone calls and that worked. .
I can't figure it out - Siri , "call my brother" >> Calling John >> Hangup!
Worked on my old 5 and my kid's 5s until recently. Help!

Hi, mswaincpa.
Thank you for visiting Apple Support Communities.
Here are a couple articles that I would recommend going through when experiencing this issue.
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/HT6473
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Cheers,
Jason H.

Similar Messages

Issue while making a call through Nokia lumia 510

Hi, i have purchased nokia lumia 510 around five months back. since then this phone is troubling me in a way or other. earlier there were issues with internet connectivity when i rectified it now there comes a new problem which occurs while making a call. whenever i make a call or receive a call after a few minutes i am unable to get the voice of the person on another side nor the other persons gets my voice. sometimes this happens just after 30-40 seconds and sometimes it happens after 15-16 minutes. then i have to cut the call in between and again have to call that person. this issue comes everytime i make or receive a call. i am so much irritated of this now. i even went to nokia care and they have replaced the speaker of the phone but this issue has not been resolved. can someone please help me to resolve this. please i need a permanent solution of this now.

Have you tried replacing your sim card?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I own Compaq Presario CQ62. Hang up while making video chat and watching videos in you tube

1.Compaq PresarioCQ62.
2. Windows 7 32 bit.
3. No error message.
4. Re-installed OS before two days.
4. System hang up whenever making video call and watching online streaming videos.

Hi,
Sorry, I'm talking about model, from there we may be able to find its specs. Please use the following example:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108&dlc=en&product=1842189
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

While making a call or answering a call the speaker automatically on

while making a call or answering a call the speaker is automatically on?can u suggest remidy

The iPhone is designed to have the screen go dark during a phone call, since the phone is normally up to your ear and you would not want to be touching the screen with your ear and possibly touching random buttons. This is done by the proximity sensor, which is located near the ear speaker on the phone. When you are reaching to turn on the speaker, it is possible that you are crossing this sensor light and it turns off the screen. I have done this before. If you try reaching from the bottom of the screen, does this still happen? Try to keep your hand away from the top front portion of the phone and see if that helps.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Problem with audio while making a call

I have a model 9810,
I can hear no audio while making a call at all, however, while making the call if I press the speaker tab I can hear (as like a hands free made)
I do not use a head set or in car kit, I just use it as a handset.
All other audio is OK, I can hear the alerts as a call or text comes in, but as soon as I answer the call and place it near my ear I hear nothing
Can someone please help
Thank you

Hello,
Questionz wrote:
I am having the exact same problem, I am not sure why, but my ear speaker is not working. I tried resetting, removing the battery, but nothing seems to be working.. Putting the call on speaker works, bluetooth works, only my ear speaker is not working.
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Questionz wrote:
I bought this from Blackberry store, is there any way I can give this in as warranty?
When you purchased, you should have received information as to how to seek support, warranty or otherwise.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lumia 520 red light while making/receiving calls

I noticed there is a small red light blinking on top of screen just near the speaker, where you hear the voice while calling. This happens while making/receiving call, a small red light blinks/stays on near speaker.
Sometimes the light goes off when i press the lock button while making calls.
Solved!
Go to Solution.

Hi Joi7,
Welcome to the forum!
What you're seeing is the proximity sensor of the device. This will activate once you receive or make a call. The main purpose of the proximity sensor is to disable the screen whenever you put the phone near your ear. This is to prevent you from accidentally disconnecting the call. This also works just by covering the sensor using your hand or any object. This feature is available to all other Nokia touch screen devices. Hope this helps. Let us know if you have another concern.

Brand new iPhone 5s earpiece volume very low while making/receiving calls

I bought an iPhone 5s yesterday, set it up and updated it to iOS 7.0.3 and much to my dismay I tried to make a call and the earpiece volume is extremely low. Is there a simple fix for this or some sort of explanation or should I book an appointment at the apple store and ask for a replacement. Any help would be much appreciated. Thanks

fono88 wrote:
My new iphone 5s makes humming/buzzing noise while making and receiving calls ...
This is not normal.
Take it in to any Apple Storev for evaluation.

Why is my backlight display lit for only 5 seconds while making a call (Brightside phone)

When I go to settings, I see that it is set for 2 minutes and indeed it does stay lit for that amount of time if I am not making a call, but as soon as I dial a phone number and especially when I get into an automated menu system where I need to press 1 to get to a different menu and then other numbers to finally get to talk to someone, the display goes black. I have tried swiping the screen which does not help. The only thing that I can do is press the curly arrow that points to the left to have the display light come back on for another 4 seconds, then press the button called keypad and hurry and press a number to continue with the menu system.
I talked with Verizon and was told can do a complete reset, but I don't want to lose my contacts. I went to backup assistant online but keep getting the arrows that go around and around forever and won't let me see if they are backed up. I want to view my contacts online and I want to print them. What's wrong with that site?
I will say this. Do not buy the Brightside phone. It is not a smart phone. It's a touch phone and when you touch anything, things come on like the camera or makes calls to my favorite contacts. sheesh! I can't wait until our contract with Verizon is over with.

I just bought the phone yesterday and have noticed the same issue. The verizon guy i just spoke to said that needed to be fixed, so he transferred me to Samsung tech support. I'm waiting for them to pick up . . .
Okay, spoke to a very nice person who concluded that this was not an option that could be adjusted. The light apparently stays on for about 6 secs.
I was hoping it could be changed, so that's disappointing, but the reason it goes dark makes a lot of sense: it keeps you from hitting buttons accidentally while you're on the phone, so you can hold the phone in your hand, to your ear, etc. without worrying about activating something unintentionally. Also saves battery.
Hope this was helpful.

Since iOS 7.0 my mail will not go out through secondary server

I have 2 domains hosted with an isp that does not allow smtp from off net. So I have always had my gmail account set up as a second outgoing server for my iphone for when im on att data. Since ios 7.0 all the way through 7.1 now it has not worked. Fails to roll to my gmail account. I have tried removing all accounts and re-setting them back up, and complete restore to factory and re-setting up. my gmail works fine for gmail, and my other accounts work fine when on home wifi, but neither will roll to the secondary mail server. And I know of at least 40 other's that have this same problem. till now I kept hoping that the next update would fix, but then it occured to me that apple may not know about this issue. Is their a fix in sight?

As said in the first post, that's the first thing I did. But just in case tried again and it still just won't type letters/numbers... For everything except the 4 digit pairing code.
It's really strange, wondering if it's something to do with the update as someone's I know is doing a very similar thing.
Have also already changed the batteries once since getting it less than a month ago.
Thanks very much for your prompt reply tho autocorrect doing a science degree is a nightmare - chemokines = cheekiness lol
Em

3GS with iOS 4.2.1 update - voicemail no longer working through bluetooth?

Hi Folks.
I've been happily using my iPhone 3GS with my Jeep Patriot's bluetooth/stereo system for months (it's called a Mygig). However, I just upgraded to 4.2.1 and now when I connect to my voicemail the sound doesn't come through the system - the iPhone thinks it is sending the audio to the stereo, but the stereo remains idle. So I have to select one of the audio options (phone/speaker) to hear anything.
If however I make a phone call, or if the phone rings and I answer it, it works fine.
Even if I use voice dialling to call voicemail, that works through the bluetooth, but as soon as it has finished the voice dialling and actually calls voicemail the stereo goes back to being idle again, even though the phone thinks it's still connected.
So at present if I want to connect to my voicemail while driving I have to use the speaker. Only for voicemail. Weird!
I am thinking this is a software update issue, as it worked fine prior to the update, and everything other than calling voicemail works fine through bluetooth.
It's as if the phone isn't talking to the bluetooth properly when it's dialling the voicemail, which is somewhat of a 'hardwired' thing, given it has its own button. I tried tricking it by dialling the actual number instead of using the voicemail button, but the iphone knew it was voicemail...
Any ideas?
PC

Yah, have the same issues since upgrading to ios421. Pretty annoying... I have two cars, and the issue is same with both bluetooth systems. I am able to make and receive calls but cannot listen to my mobile voicemail.

IPhone 5 and iPad 2 Bluetooth not working since IOS8.0 update unable to make calls through Bluetooth system in Mazda 3 and unable to connect iPad to wifi printer

Since recent IOS 8.0 updates Bluetooth on my iPhone 5 and iPad 2 is not working cannot make calls through car Bluetooth system and cannot use Bluetooth to connect to other devices on my iPad

Hi there Annapana,
You may find the troubleshooting steps for bluetooth connections in the article below helpful.
If you can’t use a Bluetooth accessory or car kit
-Griff W.

Disk not ejected properly while making a backup through time machine

Hi everyone. I'm trying to make a backup by using time machine on an external hard drive LaCie of 2 TB. However, after storing 5 to 10 GB the backup stops and I get a message window saying that the disk has not been properly ejected and that I have to eject the disk before turn it off. Then I thought it was a format problem, I went to the disk utility and I chose the Mac OS extended (journaled) format and the GUID partition table since my Mac is intel-based. I started the backup again and I got the same message window saying that I desconected improperly my external drive. The strange thing is that in both cases the backup seems to be okay at the beginning and stores 5 to 10 GB, more or less, then it stops and the message window shows up. Then I went further, I thought I could fix the problem by completely erasing the disk; I went to the disk utility and in the erase tab I chose the Zero Out Data option in the security options. The system starts erasing the external hard drive, but after a while other message window shows up saying that there was an error eliminating the disk because of a POSIX reports, that the operation could not be completed and that memory could not be assigned. Does anyone know what's going on? What am I doing wrong? Thank you in advanced for your support.

Most likely, there's a damaged/corrupted file on your Mac that Time Machine is choking on.
Erase the disk (quick erase is almost always fine) and start over.
If the backup fails, See #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
EDIT: I should add, sometimes when Time Machine has a problem, it force-ejects the drive.

Error While Making a Request Through API

Hi everyone,
I'm trying to submit a request through the API for the "Assign Roles" template, I used http://java.net/projects/openptk/sources/svn/content/branches/Oracle/OIM11g/examples/java/OIMClient/src/oim/client/request/RequestRoleCreate.java?rev=1489 as a basis for my code. Pretty much line for line.
This is my code.
public static RequestStatusSummary[] applicationAccessRequest(String email, String templateName, String roleName) {
String userKey = getUserKey(email);
Beneficiary beneficiary = null;
RequestBeneficiaryEntity entity = null;
List<RequestBeneficiaryEntity> entityList = null;
List<RequestBeneficiaryEntity> entityAttrList = null;
// add role requested
entityList = new ArrayList<RequestBeneficiaryEntity>();
entity = new RequestBeneficiaryEntity();
entity.setEntityKey(getRoleKey(roleName));
entity.setEntityType(RequestConstants.ROLE);
entity.setEntitySubType(roleName);
entityList.add(entity);
// set beneficiary to user
beneficiary = new Beneficiary();
beneficiary.setBeneficiaryType("user");
beneficiary.setBeneficiaryKey(userKey);
beneficiary.setTargetEntities(entityList);
// add benficiaries to the request data
List<Beneficiary> beneficiaries = new ArrayList<Beneficiary>();
beneficiaries.add(beneficiary);
requestData.setBeneficiaries(beneficiaries);
System.out.println(requestData);
// submit request
String reqId = requestSvc.submitRequest(requestData);
RequestStatusSummary[] requestStatusSummary = requestSvc.getRequestStatusSummary(reqId);
return requestStatusSummary;
getRoleKey() and getUserKey obtain the correct values. Directly before calling this method I log in to OIM using OIMClient this works correctly as well. The issue is that submitRequest() throws this. Any suggestions would be greatly appreciated. Thank you for your time.
javax.ejb.EJBException: ; nested exception is:
     java.io.EOFException; nested exception is: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
     at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
javax.ejb.EJBException: ; nested exception is:
     java.io.EOFException; nested exception is: java.io.EOFException
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
     at $Proxy6.submitRequestx(Unknown Source)
     at oracle.iam.request.api.RequestServiceDelegate.submitRequest(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
     at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
     at $Proxy7.submitRequest(Unknown Source)
     at testoimlogin.TestOIMLogin.applicationAccessRequest(TestOIMLogin.java:350)
     at testoimlogin.TestOIMLogin.main(TestOIMLogin.java:537)
Caused by: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
     at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

How are you creating OIMClient ?
Make sure that you are using proper OIM URL: t3://ManagerServer:MANAGEDSERVERPORT
getting error while calling RequestService interface

Since iOS 8, Siri hangs up while making a call through bluetooth in car

Similar Messages

Maybe you are looking for