Since ios7 i no longer hear the sound when i send mail
I no longer hear any sound when I send mail. It worked perfectly before upgrading to IOS7 (swoosh)
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Make sure sound is not muted in Control Center; tap on the little bell. Swipe upwards from bottom of screen to launch Control Center
Similar Messages
-
Hello so as you can see in my question i have troubles with my sound
I cant hear annything of my sound in game and i did check everything
The weird thing is that when i put my headphone in i do hear the sound
Also my music plays without my headphone
Wat can it be ? Pls help !Ok, a little clarification then, you can hear music fine with the speaker and headphone? You can hear a game's music fine with the headphone but not with the speaker? Do you get the notification sounds ok with the speaker?
If the speaker sound is acceptable with everything except the game then there is a problem with that game and its settings.
If that is the case, you might want to try deleting the game and then downloading and reinstalling the game to see if that helps the problem. -
I am having trouble sending E Mails via my I Phone. I recieve without issues, but after composing, when I send mail it makes the corresponding send "sound" but it disappears. HELP
Have all the troubleshooting steps in the article from which this was posted been tried?
-
I've lost the 'whoosh' sound when I send mail. How do I get it back?
I used to have a 'whoosh' sound when I sent mail but it has disappeared. How do I get it back? I'm using a version 10.9.1 Maverick upgrade.
Thanx Tony T1. I have been having issues with mail ever since I 'upgraded' to Mavericks. Why doesn't Apple leave things alone? Now I often can't scroll in Mail and have to shut down and restart Mail to get it to work. That never happened until the Mavericks 'upgrade'.
-
HT1338 Strange tones and sending mail sounds when not sending mail - MacBook Pro
My MacBook Pro started making a strange repetitive tone. Also, sometimes the sending mail sound commences repetitively when not sending mail.
maybe a glimmer of hope, eventually deleted my email account and reinstalled it, so far so good! time will tell, thanks to Alexander from Apple support (Greece) for that one!!
-
nee your help and the subject issue
Did you reset your phone? First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
Flash player 11.6 to hear the sounds with SMILEBOX
I have trouble with hearing the sounds when I send greetings through "Smilebox". Apparently for the sound to be heard I was told I need Flash player 11.6.
Can you help me here please ???
Thankyou and kind regards
Renate Ford
[email address removed]There have been several similar posts in the past few weeks, but I have not followed them to see if there was a solution.
Try either to go back to the previous version 11.6 (see How do I revert to a previous version of Flash Player? ), or try the latest Flash Player beta: http://labs.adobe.com/downloads/flashplayer.html -
Why can't I hear the sound on a wmv file someone sent me?
I can't hear the sound when playing a wmv file. Anyone know how to fix this?
I would use VLC - http://www.videolan.org/vlc/download-macosx.html.
Good luck,
Clinton -
i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.
I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.
Make sure the mini-displayport/TB plug is fully seated. It may look fully plugged in but isn't.
Make sure the Displays system preferences has an Arrangement tab. No Arrangement means the monitor is not being detected.
Do a smc reset.
If none of this works I suggest you take it back to apple (along with your mini). -
I want recording LP's with Audacity 2.0.5. Since I use Maverick 10.9.3 I can't hear the sound before recording. Does somebody know how to get
the presound before to click on record?You have to do some work on your own.
Start here:
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5 -
My macbook pro is making strange fan related noises. Sounds as if something is stuck in the fan. First time this has happened since I got my computer. Every time I put it to sleep I wouldn't hear the sound anymore. Any suggestions?
... Sounds as if something is stuck in the fan.
Probably is. They get dusty. Shut down your computer and clean it out with a vacuum (don't blow dust back inside). -
So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
BryanI am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .
-
I don't have money for new tech or headphones. I want to watch a movie from my laptop via AirPlay (watch a movie straight from Apple TV), but hear the sound on my headphones attached to my MB Air.
Is there any way to do this??
http://superuser.com/questions/853821/watch-a-movie-straight-from-apple-tv-but-h ear-the-sound-on-my-headphones-on-myThanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul -
When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?
Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR
Maybe you are looking for
-
SQL command IN is working whereas NOT IN not working
In application code I have the below code. IF v_service_variant NOT IN(0,1,2,3,4) THEN --Checking whether existing service variant is applicable in 21Cn Fibre. v_service_variant := 3; --If not making it as a standard service UPDATE sspt_sessions_tabl
-
Opening documents in Firefox ( SOLVED )
Hi, I cannot seem to open documents ( pdfs, doc, excel) directly from a website. When given the option of whether I want to download the file or open it, if I choose to open the file, it asks me for the location of the program. The same problem occur
-
hello. i'm going to buy apple care protection for macbook pro online but im a bit confused about these 2 products. what is the difference between applecare protection plan for macbook pro http://store.apple.com/my-k12/product/MD013FE/A/applecare-prot
-
To search the records according to certain criteria
Hello, I am a user of jdeveloper using swing/jclient for bc4j. How to search the records according to certain specified criteria i.e if user enter c in the textbox then all the names starting with the letter c matches the criteria. it is somewhat sam
-
i plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.