Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

Since upgrading Firefox, it doesn't respond when I click on print and/or print preview while displaying web pages.. No error message, just no response. I tried using both my printers..a HP and a Canon and get no results with either. I have no problem printing from any other place (including "Print" instructions within web pages, usually). I have recently upgraded my desktop (Dell Vostro 220) to Windows 7 and it went smoothly. The Firefox upgrade came at about the same time, so I don't know if Windows 7 is part of the problem. I need be able to print from the screen of web pages!

Hi jjoyceeric,
Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
Hopefully this helps!

Similar Messages

Firefox started to crash at firefox 4 and i installed the latest and keeps crashing..and more often..i updated plug ins..i reinstalled flash player..and nothing..is annoying!

Few days ago it blocked all my laptop...i had to restart the laptop(windows 7)...it appeared also that flash player has crashed...than that i have to update quick time....I installed firefox 4 few months ago...and few weeks ago i installed the latest version..and now i have this problems.So i reinstalled firefox...reinstalled adobe flash player..reinstalled quick time..so far so good..it worked but today i am still receiving crashing reports like i need to close firefox first before opening a new page..i cleared my cache browser...i clened it few times from the menu toolbar before and after reinstalling..and after crashing last time..also i used ccleaner few times and nothing!I don't know what else to do

James j,
You have a different problem. Your screenshot shows "The Adobe Flash plugin has crashed".
See [[Plugin crash reports]] and [[The adobe Flash plugin has crashed]]. If you need more help you should [[ask a question|ask a new question]] (start a new thread).

Firefox doesn't show jpg files from a web page while other browsers do

I have created a page and uploaded www.nutechequipments.com/equipment.html page doesn't show the jpg files in only firefox everywhere including Dubai. But all the other browsers show the uploaded jpg pictures in perfect manner. In Firefox only the table is loaded with placeholders. It is not a problem with my computer. It is the problem all over the world.
the sample html code is given below:
<pre><nowiki><td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td></nowiki></pre>

You have backslashes (\: escaped as %5C as seen in Tools > Page Info > Media) in the scr attribute of the images and that doesn't work in Firefox.
You need to change the backslashes to forward slashes
<pre><nowiki>equip%5Cequip.jpg
equip%5Cequip1.jpg
equip%5Cequip%20(2).jpg
equip%5Cequip%20(3).jpg
equip%5Cequip%20(4).jpg
equip%5Cequip%20(5).jpg
equip%5Cequip%20(6).jpg
equip%5Cequip%20(7).jpg
equip%5Cequip%20(8).jpg
equip%5Cequip%20(9).jpg
equip%5Cequip%20(10).jpg
equip%5Cequip%20(11).jpg
equip%5Cequip%20(12).jpg
equip%5Cequip%20(13).jpg
equip%5Cequip%20(14).jpg
equip%5Cequip%20(15).jpg
equip%5Cequip%20(16).jpg
equip%5Cequip%20(17).jpg
equip%5Cequip%20(18).jpg
equip%5Cequip%20(19).jpg
equip%5Cequip%20(20).jpg
equip%5Cequip%20(21).jpg
equip%5Cequip%20(22).jpg
equip%5Cequip%20(23).jpg
equip%5Cequip%20(24).jpg
equip%5Cequip%20(25).jpg
equip%5Cequip%20(26).jpg
equip%5Cequip%20(27).jpg
equip%5Cequip%20(28).jpg
equip%5Cequip%20(29).jpg
equip%5Cequip%20(30).jpg
equip%5Cequip%20(31).jpg</nowiki></pre>

My screen is blinking since latest upgrade?

What causes screen to blink or flash? This started after latest upgrade. How can it be fixed?

OK, well that isn't very definitive. However you can try some basic resets like doing a PRAM reset and SMC resets. If you don't know how to do these then please click:
https://discussions.apple.com/docs/DOC-3603
You may need to do each up to 2-3 times for them to work.

Printing a selection from a web page, word document etc.

It embarrasses me to say, I cannot find a way to print a selection--a paragraph for example--from a web page or a Word document. In Windows it's done with a few mouse clicks: file/print/selection. I'm sure there must be a simple way to do it in Leopard, but what is it?

While there is no "print selection" command, you can use one of the globally available services to open a new window in textedit containing your selection, then print it.
Select something and then go to Safari>Services>TextEdit>New Window Containing Selection
and a new textedit window will open with your selection pasted in. Now you can print it.
I suppose if you do this a lot, you could write a short applescript that'll do this, print it, and quit textedit, and then stick the script in the script menu. Just a thought.

I cannot open pdf files in safari. It tells me first character is invalid. I have deleted plug-ins and reinstalled program. HELP

cannot open PDF files in safari. It tells me first character is invalid - I have deleted plug-ins and reinstalled the program.

HI..
If you are using Adobe Reader ...
Try uninstalling the current copy of Adobe Reader first.
Best to use a utility to do this to make sure all the associated files are removed as well > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
Then reinstall > http://get.adobe.com/reader/
Quit then relaunch Safari to test.

After upgrading to 9.0.1 Mozilla Firefox for my pc, Firefox will not load any web pages.

After upgrading to 9.0.1 Mozilla Firefox on my pc, Firefox will not load any web pages whatsoever, not even itself. My OS is Windows Vista 64. Thanks for any help. (Having to use Internet Explorer presently.)

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Since I upgraded to iOS x lion, I can't play any videos on my MacBook

Since I upgraded to iOS x lion, I can't play any videos on my MacBook, can someone please help

Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal menu?

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal print menu?

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
ps. IE works as usual

Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

Plug-ins unavailable after reinstalling Logic Pro 7.2 upgrade

I have been running Logic Pro 7.2 which was purchased as an upgrade from Logic Gold with an Emagic XS key. Everything had been running fine until recently when I had to reformat my startup partition and reinstall everything.
Reinstalling Logic Gold seemed to be straight forward. It booted up as normal with all Logic and third party plug-ins appearing in their drop down folders when selecting a plug in.
I then proceeded to reinstall Logic Pro 7.2 upgrade only to find that all of Logic's AU plug-ins and third party plug-ins were no longer available to me within Logic Pro 7.2...?
I'm absolutely puzzled by this. Can any anyone help me?

Hey Sparco.
I was wondering the same thing, as I've recently done this as well (bought LP after owning LE, that is). I was always wondering whether or not I needed it there, or even GB for that matter. I almost deleted LE/GB, until I realized that the programs themselves aren't taking up that much space. What takes up the most space are the sample libraries, apple loops (at least the non-midi ones), and perhaps some of the plugins. As far as I can tell, Logic Pro will install as a separate app, but it will share all of the file resources with LE and GB, and just add extra stuff on top (like the ES2, Scultpure, etc etc). I don't think you'd be saving all that much space getting rid of LE.
Besides, having LE around means that you don't ALWAYS need the xskey. Perfect for anyone running a laptop.

When I upgrade to FF 26 on my PC laptop, I am no longer able to open any web pages on any browser. Help

Whenever I upgrade to FF 26 on my pc laptop I am no longer able to open any web pages on my laptop in any browser. If I reset my system to a previous date I am good to go. Any ideas on what may be going on or how to troubleshoot it? I am not a technical person - btw
My connection to the internet still shows as connected, but I cannot open any web pages.
thanks,
Bill

Is this happening on a computer running Windows (you posted with as Mac)?
If this is an issue on a Windows computer:
It is possible that security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

Have been using firefox for years but now having many problems two days ago could not acess any web pages without a firefox message saying page could not be ver

Went on the internet on Friday but a box appeared saying firefox could not verify web page and somebody could be trying to impersinate the web page this was my home page it gave me two options the first was get me out of here or that I understood the risks and to continue I clicked the latter and my home page came up this box continued to appear on each occasion I tried to acess any web pages but when I tried to acess Facebook the box only gave me the option of get me out of here it also did this when I tried to acess Mozilla Firefox to see whether there was a problem with the browser I tried to reinstall the browser but the problem persisted I finally got round the problem by reinstalling my computer to an earlier time before I did this I also have the option for Google chrome on my computer and this browser worked fine Facebook etc I prefere Firefox but although the warning box hasn't materialised since I reset my computer Firefox has become unstable where it has frozen on a web page and the only way I can get out is to start the task manager and end the programme even though the task manager is saying that the page is still working correctly but after I have ended the running of the programme it will not reload the firefox browser but again google chrome is fine I have to restart the computer to fix this problem any ideas thanks.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

Similar Messages

Maybe you are looking for