Since Leopard upgrade, Quicken data files are corrupted

Did a Leopard Archive and Install from Tiger without much trouble except for my large Quicken Data files. They have become corrupted, and Quicken support has a routine for re-building their data files by holding the COMMAND, OPTION and B keys down. The files appear to rebuild, but when I try to Save a Copy or export to a QIF file, the system crashes repeatedly. The report to Apple is several pages long, and I can't copy it here. I don't know if Apple Discussions is the appropriate place to ask 3rd party software questions, but if anyone out there has any thoughts, I would be most appreciative.
Mike Ryan

baltwo...
Thanks for the reply. I didn't keep a back-up of Tiger except for the "previous operating system" folder that is part of Archive & Install. I still have the original Tiger DVDs, and I could put a copy on another drive partition and re-install Quicken 2007; would I then go through file corruption repair scheme that the Quicken web-site recommended? Also, I will post on the quickencommunity.com web-site. Thanks for the help. I will mark this as helpful. Keep up the good work. I see your all sign frequently in discussions.
Mike Ryan

Similar Messages

Quicken data file names are mysteriously being change on my iDisk

within the last couple of days my Quicken data file names are mysteriously being change on my iDisk which seem to make them inaccesable. Not sure why this is happening

within the last couple of days my Quicken data file names are mysteriously being change on my iDisk which seem to make them inaccesable. Not sure why this is happening

"Some installation files are corrupt." Trouble Upgrading iTunes.

Please help. I have been trying to upgrade iTunes from the apple site, but everytime I try I get this error message, "Some installation files are corrupt." If anyone has any advice, it would be greatly appreciated. Thank you.
Windows XP

I also had this problem and solved it by deleting the downloaded file, turning off the firewall and Cybersitter (content filter) and downloading itunes setup again. It then worked perfectly. I therefore recommend you disable any firewall or filtering software you may have (temporarily of course) and try again. Good luck.

My Outlook Data Files Are Now .OST - How Do I Backup & Recover Local Contacts (I'm using Office 365 Home Premium)?

I recently upgraded to Office 365 Home Premium and at the same time changed my email protocol from POP3 to IMAP4.
I've now noticed that my Outlook data files stored at C:\Users\username\AppData\Local\Microsoft\Outlook are in .ost format.
I use the Calendar in my Microsoft Account as my main Calendar but I store some of my Contacts locally - which .ost file will they be held in and how can I recover them if anything goes wrong?

Hi,
A simple way to know which data file the Contacts are stored in, is to right click on the Contacts folder, click
Properties. Under General tab, find the
Location of it.
We can export the contacts to a .pst file to back up them, for the detailed steps, please refer to this link below and read the information under
Export contacts to an Outlook .pst file:
http://office.microsoft.com/en-in/outlook-help/import-contacts-HA102919678.aspx
If the data file is corrupted and you need to recover the data, we can choose Scanpst.exe from Microsoft:
http://support.microsoft.com/kb/272227
In addition, if the email account you are using is an Microsoft Account, I suggest you choose Exchange ActiveSync instead of IMAP. Thus all the contacts are synced between your Outlook Client and the server, Calendars of the account will automatically be
added into Outlook, you don't have to add the calendars separately:
Add an Outlook.com or other Exchange ActiveSync mail account to Outlook
http://office.microsoft.com/en-us/outlook-help/add-an-outlook-com-or-other-exchange-activesync-mail-account-HA104025313.aspx
If I misunderstood anything, please feel free to let me know and correct me.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Does anyone know where the iWeb data files are located or what they are called? I can't find them. I looked in Finder for files named the same as my website, but found nothing. Any help would be appreciated.

Does anyone know where the iWeb data files are located or what they are called? I can't find them. I looked in Finder for files named the same as my website, but found nothing. Any help would be appreciated.

If you erased or replaced your hard drive since iWeb was cancelled, then they are gone. Otherwise, if you have maintained backups then check those.
Usually such files are in the /Home/Library/ folder or a sub-folder.
Exposing the /Home/Library/ Folder
Pick one of the following methods:
A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
chflags nohidden ~/Library
Press RETURN.
B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
~/Library
Press the Go button.

Application files are corrupted. How do I reinstall application files?

I own the macbook Pro. My application files are corrupted. How do I reinstall them?

"Any more ideas?"
The point of my reply was for you to apply the 10.3.9 Combo Update over your installation. Repairing Permissions is always a good idea before and after any update or upgrade. Did you try this and still having Java problems/errors?
This will not harm anything to apply the Combo update over your OS.
You did not post which version of 10.3 you are using but you may wish to check to see if this Apple Knowledge Base article applies to your situation:
http://support.apple.com/kb/TS1537
littleshoulders
Message was edited by: littleshoulders

Some installation files are corrupt. Please download a fresh copy and retry

Hello,
I have installed BusinessObjects XI 4 SP02 on server 2008 R2. BO Client tools with sp02 and Patch 8 is also installed.
When tried to install BO Server patch 8 (ENTERPRISE02P_8-10009484) I get this error;
"Some installation files are corrupted. Please download a fresh copy and retry the installation."
while unzipping, WinRAR window throws below message in red;
CRC failed in dunit
\crystalreports.boe.clientactions.java.webpath_bundle-4.0-core-64\content.cab
I have tried twice with fresh copy downloaded on same server and still can't pass this error.
Loading latest patch such as patch 10 is last option since all client machines here are on patch 8.
Has anyone seen this behavior?

Hi,
I'm installing an updated version of Dashboard Design (SP04 Patch 0 - includes FP3). However, during the extraction of the installation file, I get the following message :
"Some installation files are corrupt.
Please download a fresh copy and retry the installation."
I tried to download the application again from SAP Service MarketPlace but the same message rises during installation.
The downloaded file is XCELSIUSENT04_0-20006661.exe
Did anyone manage to correclty install this version ?
Thanks for your feedback.
Hecham

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

If data files are deleted?

If data files are deleted, can they be recovered from the control file?

It depends on what is in the datafiles in the tablespaces, if they actually contain data, if they are the only datafiles for the tablespace, etc.
Let's assume that they are the only datafiles for the tablespace and segments have allocated and used space in them.
If the segments are index segments, you can recreate the indexes from the data that currently exists in the table.
If the segments are table segments, you will need to recreate the data either by hand or extracting it from another source.
If no segment has allocated space in the datafile, you should be able to offline the datafile. If this works, it is a good idea to migrate the segments to a new tablespace and then drop the tablespace (unless it is SYSTEM) as Oracle does not like offline datafiles and it will become a maintenance hassle.
If you do not have a backup, do you have a recent export?
Once you have addressed the immediate issues of reconstructing the data, you need to address the issues of backups (you should at least backup the database periodically even if you don't run in archivelog mode) and security (no one should be dropping live data files).
Regards,
Daniel Fink

Externally edited files are corrupted

I'm trying to put together a book of images and I quite like what iPhoto offers. However, after importing the pics into the book template and arranging them, they needed some cropping and tweaking. I double click to open the images in Photoshop CS5, edit and close. The updated image is now saved as a separate file in iPhoto.
I then tried to create a PDF of the book and iPhoto reports that files are corrupted or missing - always the files I edited in Photoshop.
Anyone else experience this?
Cheers,
SNaP!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
Regards
TD

CRVS2010 Beta -CRforNET40_x86 - I get 'Some installation files are corrupt'

Hi,
I just downloaded CRforNET40_x86 from the "Blogs" page and got the 'Some installation files are corrupt' error message on trying to run/extract the files.
The message also asked me to download the file again but it would seem pointless as I didn't get any download errors so I'm assuming that the file may be corrupted. Would you please have it checked so that I can try downloading it again.
Thanks,
Michael
Edited by: turbo56 on Aug 4, 2010 6:19 PM

Sorry Ludek for not specifying the link.
I downloaded the file from "/people/blair.wheadon/blog/2010/07/29/crystal-reports-for-visual-studio-2010-beta-2-and-runtimes-now-availableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529".
Anyhow, I decided to download it again and this time it did run properly/extract and install. Don't know why it didn't work/run the first time but the main thing is that it worked.
Thanks for your prompt response.

Data blocks are corrupted : Error ORA-01578

Hi All,
We having a serious problem with the oracle running in our development server.
Data blocks are corrupted with the error ORA-01578
and we have identified the segment as an Table TBTCO.
Hence can any body suggest us the way to resolve this.
Currently we dont require any data from that table. In that
case can we drop down the table and import it again with
the same table downloaded from production server?
As we dont have any oracle DBA's please suggest us the way to resolve this.
Please advise.
Thanks & Regards,
DVRK

Hey,
if you are using RMAN backup you can restore and recover only the corrupted blocks.
For more information take a look at that nice blog article from Lars:
Some hints to make handling of oracle datablock corruptions more efficient
If you don't have any idea howto handle this situation, please open a SAP call.
Regards
Stefa

I installed creative cloud but cannot install apps, i.e., Acrobat ProXl says files are corrupt

I installed creative cloud but cannot install apps, i.e., Acrobat ProXl says files are corrupt. Each app says the same thing.

the cc desktop app installed without error?
if yes, what are you clicking to see that corrupt file message?

Cannot install downloaded Elements 12 files are corrupt

This time is costing me more than the program cost. I've spent hours uninstalling Photoshop Elements 12, installing Photoshop Elements 10, then my Premier Elements 12 was corrupt so I downloaded the installed after logging into my Adobe, now it will not install and says the files are corrupt. I need to get this program back on my computer please.
Windows 8, i7 processor, 16GB of RDRAM, 3GB of Graphics Memory, fast internet connection, problems finding any help from Adobe.

Hi timmyleeturner,
Do you have any antivirus, firewall or any other security software installed on the machine?
If yes, then please try to turn them off and download the software again from the link below.
http://www.adobe.com/uk/downloads/other-downloads.html
Also check the size of the installer on the website and on your machine.
Regards,
Anand

Since Leopard upgrade, Quicken data files are corrupted

Similar Messages

Maybe you are looking for