Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Similar Messages

Using scroll wheel with modifier key to zoom out is not working

I can't zoom out with the magnifying tool selected in all programs of the CS3 suite using the option key on a Mac. I can zoom in with no problem. I've been trying to figure this out for "8 hours" now!!!
I do have this checked in the system preferences and Photoshop preferences. I don't think this is considered a keyboard shortcut but I do have universal access checked and zoom out checked in the system preferences.
I searched this site and all of the internet looking for answers but can't seem to find much. I appreciate any help you can give. I'm way behind on my work today.
Thank you!

The default key for scrolling zoom is not Command but Control. To change this, go to System Preferences —> Universal Access and click on the Seeing tab. In the Zoom pane, click on the Options button, and in the sheet that drops down, select the text box at the bottom, highlight the character there, then press the modifier key you prefer.
HTH
Archie

Zoom:Use Scroll wheel with Modifier Keys to Zoom

Help! Since the 10.6 update from 10.4.11, I can no longer zoom in and out by holding Command while moving scroll ring on my Kensington Expert Mouse. I have tried other modifier keys to no avail.
I suspect a conflict, but do not know where to fix it. When in Firefox 3.5.2., Command plus scroll ring zooms the active window nicely. Any ideas or should I provide feedback to Apple or both? Thanks! DJ

The default key for scrolling zoom is not Command but Control. To change this, go to System Preferences —> Universal Access and click on the Seeing tab. In the Zoom pane, click on the Options button, and in the sheet that drops down, select the text box at the bottom, highlight the character there, then press the modifier key you prefer.
HTH
Archie

I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

JBO-25014: Another user has changed the row with primary key...

Hello,
could you help me please with resolving this error "JBO-25014: Another user has changed the row with primary key..." - I am just getting a row from a view by bind "filter" variable, then I am assigning new values for some of the attributes - and trying to commit ..unsuccessfully..
View is based on Entity.
I saw directive for setting Entity's attributes as "update after insert / update" - but this did not help me.
Thanks in advance.

Hi
Please try this solutions:
One solution is to change the ADF BC locking behavior to optimistic instead of pessimistic. Choose the AM and click the Configuration context menu option. Select the LocalAM entry and go to the Properties. Scroll down to the locking setting and change the existing entry
If there is a trigger changing values, you need to mark those attributes (the ones that may be changed) as refresh after insert and/or refresh after update in your Entity Object.

Problem with modifier keys in InputEvent

I am trying to override DefaultCellEditor.isCellEditable() such that only unmodified double-clicking on my table cells will start edit. Naively, I thought this would be simple: cast the received EventObject to, say, an InputEvent and then query its modifiers. However, although calling toString() on the event object clearly shows the modifier key(s) in the event, getModifers() or getModifiersEx() always tells me there weren't any!!!
Here is a little SSCCE which shows the problem (I hope -- I'm on a Mac, so YMMV; I sure hope not). We have a table with one row and three columns; only the middle column is editable. This column has a custom editor defined on it, which overrides DefaultCellEditor.isCellEditable() to check whether modifiers are down.
public class AltDoubleClick extends JFrame
private class MyDataModel extends AbstractTableModel
    private String[] values =
      {"a string for col 0", "a string for col 1", "a string for col 2"};
    public int getRowCount()
      return 1;
    public int getColumnCount()
      return values.length;
    public Object getValueAt(int row, int col)
      return values[col];
    public boolean isCellEditable(int row, int col)
      return col == 1;
    public void setValueAt(Object value, int row, int col)
      values[col] = (String) value;
private class MyCellEditor extends DefaultCellEditor
    MyCellEditor()
      super(new JTextField());
    public Component getTableCellEditorComponent(JTable table, Object value,
                                                 boolean isSelected, int row, int column)
      if (value != null && value instanceof String)
        ((JTextField) editorComponent).setText((String) value);
      else
        ((JTextField) editorComponent).setText("");
      return editorComponent;
    public boolean isCellEditable(EventObject e)
      if (e instanceof MouseEvent)
        MouseEvent me = (MouseEvent) e;
        System.out.println("modifiersEx is " + me.getModifiersEx());
        System.out.println("modifiers is " + me.getModifiers());
        System.out.println(me.toString());
        return me.getModifiersEx() == 0 && me.getClickCount() == 2;
      return super.isCellEditable(e);
public AltDoubleClick()
    Container c = getContentPane();
    table = new JTable();
    table.setModel(new MyDataModel());
    table.getColumnModel().getColumn(1).setCellEditor(new MyCellEditor());
    c.add(new JScrollPane(table));
private JTable table;
public static void main(String[] args)
    javax.swing.SwingUtilities.invokeLater(new Runnable()
      public void run()
        AltDoubleClick test = new AltDoubleClick();
        test.setSize(500, 500);
        test.setVisible(true);
}When I run this and double-click the middle cell with a modifier down, I get the following output:
modifiersEx is 0
modifiers is 24
apple.awt.SelectionMouseEvent[MOUSE_PRESSED,(231,5),absolute(233,67),button=1,
modifiers=⌥+Button1+Button2,clickCount=2] on javax.swing.JTable[...]or, alternatively:
modifiersEx is 0
modifiers is 20
apple.awt.SelectionMouseEvent[MOUSE_PRESSED,(202,3),absolute(204,65),button=1,
modifiers=⌘+Button1+Button3,clickCount=2] on javax.swing.JTable[...]As you can see, despite the fact that modifier keys are being printed out by the toString() call (⌥ and ⌘ are the alt/option and apple keys, respectively), I get no indication from getModifers() or getModifiersEx() that they are down!!!
Can anyone help me see through this confusing mess?

Walter Laan wrote:
Read the friendly manual. It explicitly tells you not to use == to check stuff and it should be pretty clear that it won't be zero for a mouse button down event.Good point, and I ought to have been more clear in my OP. I initially wrote it as they suggest, but found that wasn't working either. (This was work that I did in two parts with a gap of a couple of months in between, so I'd forgotten that I had tried that.) However, the return values from getModifiers() and getModifersEx(), in my output statements, shows that there are no modifier bits set -- so no point testing for them:
* When I double-clicked with the alt/option key down, getModifiers() gave me 24, which is simply BUTTON_1_MASK + BUTTON_3_MASK (which isn't even correct -- I was only using the left mouse button).
* When instead I held the apple key down, getModifers() gave me 20, which is BUTTON_1_MASK + BUTTON_2_MASK (also not correct -- again I was only using the left button).
* getModifiersEx() in both cases gave me 0.
I realise that some of this behaviour (the incorrect mouse buttons info) is down to Apple's runtime, but if the correct modifier is in the apple.awt.SelectionMouseEvent object (as we can see in the toString() return value), then surely it should be available from getModifers() or getModifiersEx()!

Hi my iMac has decided to come up for the 5 time Work the ? Symbol just tris time everytime i try to restart the iMac with any key it won't work, then I try also i knserted the installation dvd and it does not, If media is getting scratched in the drive

Hi my iMac has decided to come up for the 5 time With the ?question mark Symbol just this time when i try to restart the iMac with any key it won't work, then I try also to insert the installation dvd and stard with yhe C or D key
Still no way to grt it starting, also I notice the DVD drive is getting scratched in the drive just before it outomaticly ejected.
media is getting scratched after been used and ejected by my iMac without loading .
Please help!!! I to finish my college work and have no way of work on it! HELP
Thanks

Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD. Some have it on the Disc #2.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

After EFI firmware update the scrolling with two fingers doesn't work inside the browsers (both safari and chrome)

I've got a new MacBook Pro Retina from october 2013 13" (8 gb Ram and 256 gb SSD).
I had the "freezing" issue that was solved with the firmware EDI update.
But after this update i have now another problem: often during web browsing the scroll with 2 fingers up and down the page stops working (but the trackpad is ok for everything else and if i go in other programs the scroll works as usual). The only solution is to restart the browser but the problem happens again and again.
Both on Chrome and Safari. Especially on Safari everything freeze if i try to scroll on the right to go back to the previous page.
Does anybody else have this issue?

macmattia wrote:
I've got a new MacBook Pro Retina from october 2013
Does anybody else have this issue?
Doesn't matter if anybody else has this issue.
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Another user has changed the row with primary key -Table changed externally

Hello,
I am facing the error: "Another user has changed the row with primary key oracle.jbo.Key[94 ]." during the delete operation.
User case scenario:
1. Added new row in the table.
2. Once new row is added to the the table, another application will update few columns in the newly added row based on some logic.
3. On the same session I am trying to delete the newly added row and getting above mentioned error.
I have added a "Button" in the table to partialRefresh the table to check the new values of the changed columns.
I have checked the forum and found many similar errors and tried the following but nothing helped.
1. By setting "Auto Refresh = True" for the view object.
Issue faced-> It worked fine but after few add and remove my db is getting to inconsistent state after which, I am not able to do any add/delete from my page.
Error: "Too many objects match the primary key oracle.jbo.Key". I have checked this and I am not getting this error when "Auto Refresh = False" even after multiple add and remove actions.
2. By Setting "Auto Refresh" the iterator associated with the page.
Issue -> Did not work at all.
Looking forward inputs from gurus.
Thanks
Abhijeet

Finally I found one solution to this problem at: [ http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/|http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/]
Simply overriding the lock() method in the entity object resolved issue. Kudos to the author.
Code:
public void lock() {
try {
super.lock();
} catch (RowInconsistentException e) {
refresh(REFRESH_WITH_DB_ONLY_IF_UNCHANGED | REFRESH_CONTAINEES);
super.lock();
But, Now my refresh button is not working as depend on the "Auto Refresh = True" to update the table.
Can anyone tell me how can I refresh the VO of my table from the button.
Thanks
Abhijeet.
P.S: I have already added the partial trigger but it is work not working as the data is cached in the VO. Removing the Cached property for the VO is creating other problems.

How can i connect the mac with internet key?

how can i connect the mac with internet key?
I try but it tolds me that I haven't the javaruntime...

I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

Error on commit: Another user has changed the row with primary key : Rec_10

i am using jdev 11g R2
i implemented a master form and two detail tables on a jspx page
added createInsert, commit and rollback buttons
actions from these buttons all are executed from a bean
for entity attributes: refresh after insert and update are marked as checked
i am using login page for authorizing the user by getting the user information from user table
and then using the userid i am applying the setVisible property on some components at bean code
when i am inserting a new row there is no problem, here i am generating the new id like 'Rec_10', using a database sequence
but when i am trying to update a current record, it is showing the error --> Error on commit: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[Rec_22 ]
on clicking the commit button and also it is not updating the record on database
Thanx in Advance
kumar
Edited by: user10922309 on Nov 18, 2009 3:25 AM
Edited by: user10922309 on Nov 18, 2009 4:28 AM

Hi John
thnq for your quick responce.
here are the attribute details:
Attribute Name: RecID, Type: String, Value Type: Expression, Value: 'Rec_' + (new oracle.jbo.server.SequenceImpl("Rec_SEQ_AN", object.getDBTransaction())).getSequenceNumber()
Updatable: While New and Primary Key, Queryable, Persistent, Mandatory, Refresh After: Update, Refresh After: Update and Insert are markded as checked
error details:
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[APP_22 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1062)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:548)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:7762)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5554)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6057)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6229)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3127)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2935)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1991)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2233)
     at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1580)
     at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1404)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1289)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:201)
--> at Index.saveApplicationAll(Index.java:6246)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
--> on click commit button Index.saveApplicationAll method will invoked.
Thats it.
Kumar
Edited by: user10922309 on Nov 18, 2009 4:32 AM

Another user has changed the row with primary key oracle.jbo.Key

Oracle Jdeveloper 11.1.2.1
ADFbc + JSF
I have a Page ( Purchase Order Status) (which show all PO to be approved) from this page (page1) the Supervison can call Regular PO (Page2) and change whatever he needs to change. (products, quantities, discounts,warehouse...)
then on Page2 he invoke (commit) after his changes and return to page1, when supervisor change the status to Approved on page1. I get this Error (Another user has changed the row with primary key oracle.jbo.Key[#]).
for sure there are no another user changing this PO.
both page are based on same Entity Object (PO) , how can I solve this Issue? thank you

hi,
This occur due to pessimistic locking mode for ApplicationModule ,alter to optimistic and check following sample to get knowledge about locking mode.
http://andrejusb.blogspot.com/2010/03/optimistic-and-pessimistic-locking-in.html-Suersh

Another user has changed the row with primary key exception

Hi Experts,
I have a method in AmImpl.java. I am calling this method from my bean. The method opens a JDBC connection(i know it is not a good approach, we should use AM instance, but this was the last option as had tried all) and updates a table in the database. I want the data to be refreshed on screen after update is performed. So, I am doing VO.executeQuery() after i commit the data in the database and that is when i get the exception "Another user has changed the row with primary key exception".
Can you please tell me how to get rid of this error or any other way of doing the above process?

I have a screen divided into two parts, i have used a Panel splitter for that. Each pane has a table. Say i edit a record in table 1 and on the basis of changing a flag, the record should move out of table 1 and should go to table 2 in the second pane. the records in table 1 have some priorities defined by the end user, so if a record moves out or is reordered within that table, the rest of the records' priority number also changes. I have achieved all this. Now, when I apply a filter on the table, the record set gets filtered and contains limited set of rows. Now, when i try to achieve the two processes i have mentioned above (moving out or reordering), I need to have a control over the entire rowset because i need to alter the priority numbers accordingly but the VO iterator contains only the filtered set of rows even if I do VO.executeQuery. I was not able to get the entire rowset, so thats when i decided to use JDBC and i am able to successfully update the database. Then after the update, i need to refresh the table on the screen, so I did Vo.executeQuery in the bean after the method was called and I encountered this error. Then, I removed this Vo refresh from the bean and did this.getVO.executeQuery in the AmImpl method, after i commit changes in the database, it was working fine for few days but now it has started flashing the exception "Another user has changed the row with primary key exception".

Another user has changed the row with primary key oracle.jbo.Key HELP

I created VO which based on two entities. Then user search from that VO, when result comes update two row of each entity .
HERE my function
public String lockPayment() {
getAppImpl().getcheckPaymentsVO1().setRangeSize(-1);
Row[] rw2 = getAppImpl().getcheckPaymentsVO1().getAllRowsInRange();
checkPaymentsVORowImpl tparow;
tparow = null;
for (int j = 0; j < rw2.length; j++) {
tparow = (checkPaymentsVORowImpl)rw2[j];
// tparow.setApayLock("1");
tparow.setAtaxLock("1");
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
When I click it gives me error:
----------> Another user has changed the row with primary key oracle.jbo.Key
Any suggestion !!!!!!
Edited by: 903927 on Dec 14, 2012 1:00 AM

Hi,
see this: https://blogs.oracle.com/onesizedoesntfitall/entry/the_case_of_the_phantom
Frank

Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.

Similar Messages

Maybe you are looking for