Since Mavericks, when I scroll the beach ball is flashing. Any solution?

Since Mavericks, when I scoll down a page, the beach ball is always flashing. Any solution?

See these threads:
https://discussions.apple.com/message/23504373#23504373
https://discussions.apple.com/thread/5466487?start=30&tstart=0

Similar Messages

Have 2009 iMac, 2GB of RAM, with ML, see beach ball alot lately, any solutions? More RAM? Help!

Have 2009 iMac, 2GB of RAM, with ML, see beach ball alot lately, any solutions? More RAM? Help!

Agree titally with th great posters so far.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

Mavericks and the Beach Ball...

Ever since I installed Mavericks the beach ball appears a lot. Did not have this problem prior to the install. Now getting worse, just searching around a document, one or two finds, will cause the ball to appear and then the app crashes. Can happen in any app I'm running. Tried the disk utility several times but it is not reporting any problems. I am running version 10.9.2 and have a 2.9 GHz Intel i7 with 8 GB memory. Any ideas on how to figure this problem out and repair.
Thanks
Steve

Do you have any third party apps, addons, plugins, cleaning software like
CleanMyMac or antivirus software installed?
Do you use Google Drive?

I keep getting this message when I try to type a mail in yahoo- "Alert. Couldn't contact Spell Checker." It slows everything down and I get the beach ball

Alert! Couldn’t contact Spell Checker. I keep getting this message when I try to type a mail in yahoo. I get the beach ball and it slows down everything.This has been happening since yesterday. Please help if anyone else has had similar problems or has ideas to fix this. Thanks.

Chris,
I am having Spell Check probs too - it underlines, but that's all. I Googled and tried 5 different places for an answer - even 'jumped the pond'....but got no answers.
i started a thread, "Spell Checker on the fritz!!", and got one good and reasonable answer...
only it didn't work. It involved a .plist file, and once you toss one and do a re-start, it's supposed to re-build itself. But, no, SpCk still 'on the fritz'. I'm going to do one more re-start, but otherwise....
May the first one on either thread that gets an answer that works - PLEASE let us all know.
Keep your fingers crossed and hold your mouth right - lol. Nikki B.

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I'm disappointed with the performance. Any

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple? I've been sending them so many reports after crashes, that their file must be full!

Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
Last login: Thu Nov 3 20:55:11 on console
Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.AmbrosiaSW.AudioSupport(4.0)
Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.openssh.sshd
com.stclairsoft.DefaultFolderXAgent
com.microsoft.office.licensing.helper
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
com.bombich.ccc
com.adobe.SwitchBoard
Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.sony.PMBPortable.AutoRun
uk.co.markallan.clamxav.freshclam
com.veoh.webplayer.startup
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
FxPlug.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.sony.PMBPortable.AutoRun.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
com.microsoft.office.licensing.helper.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
.DS_Store
Application Enhancer.prefPane
Default Folder X.prefPane
DejaVu.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
/Library/ScriptingAdditions:
.DS_Store
Adobe Unit Types.osax
Default Folder X Addition.osax
/Library/StartupItems:
Library/Address Book Plug-Ins:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
com.veoh.webplayer.startup.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
WindowShade X.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
Steve-Kirkbys-iMac:~ stevekirkby$

When carrying out some house keeping on my bookmarks, every time I delete or move or add a folder I get the beach ball showing and a very delayed response where everything freezes. Any ideas

When carrying out some house keeping on my bookmarks, every time I delete or move one or add a folder I get the beach ball showing and a very delayed response where everything freezes. Any ideas?

If you're synchronizing Safari with iCloud, disable that temporarily and see whether there's an improvement.

I get the beach ball of death when I empty the trash on my new 10.7 Mac. Even in safe mode

When I attempt to empty the trash I get the progress bar with message on how many items to empty and I get the barber pole lines but it never really starts to empty. I just have the beach ball of death. Everything else on the MacBook Pro comes to a halt (if you wait about 5 minutes an app selected to quit might quit). You can click on the X to stop emptying trash and it says it's stopping but it keeps showing the marching progress bar and the beach ball keeps spinning.
Running 10.7. 8 gigs ram 2.0 ghz i7. 15".
The only way to shut down is force quit holding down the power key. Tried it in Safe Mode with same results.

I had the same problem.
Your advice solved my problem.
Thank you for the original post. And the two updates.
I nominate you for "15 Points." 5 for your helpful answer. And another 10 because it was correct.
Apple's Support Community needs more people like you.
If I had posted a question and no one answered, I'd say, "the **** with it."
Instead, you came back - not once but twice - to provide updates.
Again, thank you.

Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8)

Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8).
But switching to Crucial M4 SSD, everything is just fine & great~
Any genius, know why?
Do I need to enable TRIM for Intel 330 SSD (Sandforce)?
THX for help!!
Info:
MacBook (Black, 2006, C2D, GMA950, 4gb Ram, OSX 10.6.8)
-Both tried clone OS & clean install OS

I just installed a 120 GB 330-series Intel SSD in my late-2008 aluminum MacBook and I have experienced the beachball problem on a fresh install of Lion and a fresh install of Mountain Lion. I never saw this behavior with my old Western Digital 500 GB HDD. Does anyone have any suggestions about how to avoid the "freezes" associated with the 330-series SSDs?

Mavericks Screen Capture causes spinning beach ball

Trained by experience never to install a brand new operating system on top of a perfectly functioning one (unless I want to risk many wasting times and losing productivity), to test out the new Mac OS, I installed Mavericks on an external FireWire drive by upgrading a fresh install of Snow Leopard, updated to its maximum version. Nothing else was on the volume, for I had used Disk Utility to securely erase and content and overwrite the volume with zeros.
Immediately after the Mavericks, I looked at the System Profile, taking some screen captures of selected windows. While Mavericks successfully captured the screens, it failed to display them when I selected one and hit the space bar. Instead, mavericks presented a perpetually spinning beach ball that prevented me from doing anything else on the Mac. I was forced to shut down.
Upon restart back into Mavericks, I encountered the same problem. I had to force power off again.
After rebooting into Mountain Lion on my internal hard drive, I ran a complete series of hard drive maintenance utilities involving all the tools I have, including Disk Utility, Drive Genius, Disk Warrior, and Tech Tool Pro. All ran successfully and reported no problems. I then capped things by running iDefrag to eliminate file fragmentation and to optimize the volume. With several hours of labor invested in preparing the external hard disk, downloading Mavericks' installer, running the Mavericks installer, performing all the pertinent maintenance routines I could think of, and finally optimizing the volume, which has no other software on it besides the new Apple operating system, I restarted the Mavericks volume. I then took a fresh screen capture, selected it, pressed the space bar, and I still got that infernal spinning beach ball.
I let it run for at least half an hour as I returned to watching a football game, hoping things would finally get cleared up. They did not. The ball still spun. I could not even get to the Finder to peek into the Force Quit command under the Apple icon. So, as originally condemned, I was compelled to hold down the power button to regain control of my computer, which this new, appropriately named operating system had wrested from me.
Anyone having a similar problem? Anyone aware of a sure-fire solution, other than to avoid relying on this new operating system, which must be my policy until such glitches get fixed?
At least you know now why I consider it unwise to install a brand new OS atop of one that has served you well.

OK, it’s Wednesday now, late afternoon, following a long yesterday, spent exclusively on getting Mavericks installed, a day which continued well into night, approaching the sun rise, until I collapsed. No one can tell me that the Mavericks installation is without errors! Your mileage may differ, if you’re lucky. But if you had to go through what I just did, you’ll long for the days of System 7, when all you had to do was shove a half-dozen floppy disks into a floppy drive to get your Mac up and running without such angst.
SHORT ANSWER:
After many twists and turns that Apple should have foreseen and not inflicted upon customers, I finally managed to get Mavericks installed on my external Firewire hard drive.
I did follow your lead, Baltwo, that the nature of the problem might lay in corrupt preferences files on the primary Account, but, as I attempted a couple of days, I modified your suggestion that I cherry-pick which plist files might be good vs. which might be corrupt, by deleting the whole **** account. A couple of days ago, my intuition told me that doing that was the wiser way to proceed; today I felt compelled to do exactly that, because I had no other choice.
The reasons I had to do that is elaborated upon below.
LONGER EXPLANATION and DETAILS:
As I explained in the message I composed on Tuesday morning, I felt so insecure that I did not obtain a well-functioning operating system that I had decided to start the installation all over from scratch.
It took all day Monday to again use Disk Utility to securely erase the volume and prepare it for the new installation. When I tried to short-cut the process by doing a Quick Erase, the volume refused to accept the installation of Snow Leopard 10.6.3 from the DVD. On top of that, I again encountered difficulties in installing Snow Leopard from the DVD, because the installer just could not close the deal. The gauge runs up to the 99% mark, and it hangs there saying that it is “Moving items into place.” Sure, it is!
I’m a patient guy, so I let the installer do its thing for about four hours while I watched the World Series game. (Yeah, Red Sox!) But by the time the game was over, so was my patience. I had to Force Power Off the Mac and restart it.
Since I have no confidence in an operating system whose installer failed to do its job properly, I felt that I had to do more. Before I did that, though, I did a Google search to find out if my experience was unique. It is not! The forums are full of people who have complained about this very same hanging problem ever since the Snow Leopard DVD was released. Great, I thought. Now what do I do?
I decided to the Apple support site and download the 1.x GB combo updater to Snow Leopard 10.6.8 in the hopes that the upgrade process would cure whatever issues cropped up during the incomplete installation by the DVD. After downloading that combo disk image, installing 10.6.8, restarting the Mac under 10.6.8, and getting all the software updates applicable to that version, a few tests, supplemented by a running a whole barrage of maintenance utilizes to fix permissions, repair the disk, rebuilt the directory, seemed to indicate that I did finally achieve a solid installation of Snow Leopard 10.6.8 and all its trimming.
To save myself any future agony of having to go through this kind of winding road installation again, I used SuperDuper to create a disk image of the entire volume. That disk image is stored on another Firewire volume, ready to burned at some future date onto a BluRay disc for safe-keeping and backup.
With Snow Leopard safely installed on the volume and sporting one user Account, I was ready to use the Mavericks installer package that I had downloaded last Saturday, when I first began this process, to upgrade to Apple’s latest and greatest OS. Unfortunately, the installation process failed in the same way that the Snow Leopard installer failed. The installer just could not get over the hump of closing the deal. Once I got the installer started, I went to bed.
Four hours later, the installer still had not completed its job, again getting to the 99% mark, and just hanging there. Again, I had to Power Off the Mac. Upon restarting with the Option held down, I elected to start up using the built-in Recovery feature.
That seemed to work, but only sort of. I was able to get a Mavericks desktop, but the User account had absolutely no privileges to do a **** thing. It could not open its own Home folder to see what was in it. It could not complete the screen capture process, because I had no permission to save the picture anywhere, like on the Desktop.
In System Preferences, I tried to increase the size of the cursor, but that failed. In Finder preferences, I tried to make the hard drives show up on the desktop, but that failed, too. I ran permissions in Disk Utility; that did no good. Nothing worked! I could not even change anything related to my User account, because I had no permission to do so. Imagine that: my only account was an Administer account to which I had no access. I would not have thought such a thing could be possible.
I was caught in a loop, stranded on a Mobius Strip, walking on the wild side, surfing the waves of a brand new operating system corrupted by its own installation process.
Not a good thing at all.
Since the first installment had also resulted in a bizarre set of user accounts ending up with QuickLooks being declared the winner of a new account the system decided to create for me, I think it is reasonably safe to conclude that there is some kind of a bug, or flaw, in the Apple upgrade / installation procedure that needs some attention by Apple system engineers. None of this kind of stuff I have delineated at some length should be happening to anyone who owns a Mac.
And, Baltwo, even though I had kept uppermost in my mind your suggestion about creating a new account merely to ferret out which preference files might be corrupt and which might be OK, I decided that I did not want to take any chances at all with this extremely messed User account, which had worked fine in Snow Leopard, but had somehow got corrupted during the upgrade. So, as before, I decided to (1) create a brand new Administrator account; (2) log out from the useless User account in which I had no privileges whatsoever; (3) log in with the brand new Adminstrator; and (4) delete that useless User account entirely, completely, and forever.
At first, I was a little hesitant about deleting the first Administrator account that existed in my Users and Groups pane. I did not even know if such a thing could be done. So, I referred to my David Pogue reference books, and I did a Google search for “Delete Home User Mac” to see what others knew about this. Everyone described the standard way to delete an account; no one even mentioned any prohibition about deleting the original User account. So, I went ahead and deleted it, without encountering the slightest problem in doing so. I even followed up with before and after Terminal commands to see if that useless User account was truly gone, and it definitely went poof. Since I lacked permissions to create any documents at all within that former Home folder, getting rid of it was easy. I think that the System was just as glad to trash it as I was.
Hopefully, whatever corruption occurred during the Mavericks installation and upgrade process was restricted to the preference files associated with that messed-up, original Administrator account so that I can begin exploring Mavericks with a perfectly pristine operating system. Before I start tweaking it or adding stuff to it, my next step will be to use SuperDuper to create a disk image of the entire volume, so that, in the future, I will have a clean set of system of file to install on this external Firewire volume, or on any other internal hard drive I choose to install Mavericks later on. A Bluray disc will contain that disc image for safekeeping when it’s time to remove it from the destination volume where it gets created.
As to the tardiness of my reply, it is caused by the exorbitant amount of time—four days!—it took me to trek along this twisting, winding path of installing Mavericks, as well as a glitch in the mismatch of similarly looking User Names associated with similarly looking Apple ID accounts and similarly looking User Names associated with nearly identical Email Addresses that do not convert from one to the other, as, for example, mac.com does to me.com.
As I learned from Apple Staff who responded to my report that I was being locked out of the Apple Discussions community, there are four pieces of information that must match up for each Apple ID account, and my data had slipped out of sync. Now I know why, during Apple’s changeover in the formatting of the Apple Discussions section, I lost all those “points” I had accumulated in helping others, not that I track such things, and I could not find where my previous discussions were.
That’s also why I may be able to award anyone points for helping me in this thread, but I’m dialing in under the “other” Apple ID, not the one I used to create this topic. Close readers will observe the slight difference.
Thanks a lot, Baltwo. You get the credit for pointing me in the right direction.

The beach ball will not go away. It is acting as the cursor in all open programs. I know summer starts this week but this is ridiculous!

The beach ball will not go away. It is acting as the cursor in all open programs. I know summer starts this week but this is ridiculous!
thanks Denise

This just happened here twice to. Was working in Photoshop CC on my Cintiq HD24 Touch when the cursor turned into a static beach ball. First time i ended up rebooting (really annoiying). Second time i opened Chrome to google this bug. Somewhere in the process of searching information my cursor changed back to an arrow???
Using Mavericks on a rMBP mid 2012, Photoshop CC and a Wacom Cintiq HD24 Touch. Did not experience this before working on the Cintiq.
Just letting you know.

My iMac 27 inch is very slow seems to churn and the beach ball is showing

I have an iMac 27" bought in 2010 3.2 GHz Intel core i# processor, 4 GB 1333 MHz DDR3 Memory, 1TB SATA disk.
It is running for a long time when starting up and the beach ball is showing several times. It can last for up to 45 minutes for all the processor noise to go down then it works fine until I open an application. It starts to run in the background again and everything slows down. At first it was the backup but that is not the case anymore. Could someone help me to speed this iMac up again.
Thanks
Abe

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm having trouble accessing a Library. I keep getting the beach ball every time I try to open it.

Hi all. Very, VERY new to FCP. I've used many of your suggestions on here to help me through a lot, so thank you!
This is just one issue that I can't seem to figure out.
I was working on a project yesterday without any problems.
Today when I went to work on it, Final Cut would start up, but it would display the beach ball forever once the start up routine was finished. The project would never load.
A note, I have all current App updates installed.
(I figured maybe this particular project didn't get updated for some reason, so I tried manually updating my projects and events, but when I went to select them in my 2nd drive, they were grey and I couldn't select them.)
Another note, other projects work perfectly fine when I go to open them. It's just when I go to open this particular one, Final Cut will not work. Endless beach ball.
I tried a suggestion that one user had, and that was to open two separate windows in Finder, and move the uncooperative library package contents into a new library. That didn't work either, and now I am unable to move the library package contents back to their original library. There is a yellow "!" triangle next to the library in Final Cut, so I'm wondering if this means that the file is corrupt.
Hopefully I've given enough information on here to shed some light on my problem. Any help would be greatly appreciated.

If it was working on 10/1, why not open up the most recent backup library with a timestamp of that day. Unless you specified otherwise, your backup folder is in Movies in your home folder. You can double-click one to open it in FCP.
The update command actually wants a mounted drive selected.
I suggest not going into the library bundles and moving or modifying folders/files except as a last resort. It sounds like both libraries are corrupted.
Russ

Since Mavericks, when I scroll the beach ball is flashing. Any solution?

Similar Messages

Maybe you are looking for