Since moving to a new location Foxfire is very slow

I have recently moved and since that time Foxfire is very slow and hesitant. I have rebooted and everything I know to do. Can you please help me?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

My iPhone 4s always keep on closing after I open an app since I installed the new iOS any been really slow since then. Any ideals

My iPhone 4s always keep on closing after I open an app since I installed the new iOS any been really slow since then. Any ideals

First Reset it: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
If that doesn't work Restore it from a backup in iTunes.
If that doesn't work Restore it as a new device and manually load your apps, music, etc.

Since downloading Mountain Lion, why is Safari running very slow? I've check the internet and it's fine.

Since downloading Mountain Lion, why is Safari running very slow?

You're going to have to be more specific and include some details.

My ipad on the new ios7 is working very slow wifi

my ipad on the new ios7 is working very slow on wifi and so is my iphone 5 any suggestions?

A solution has been found thanks to a couple of hours on the net and logical analysis.
It seems my email provider BT has changed their mail client to Outlook 365. They have started my migration, hence I cannot send mail from home wifi, and will complete after a few days.
If anyone reading this in the UK and has the same issue then follow this link for setup of the new system.
http://btbusiness.custhelp.com/app/answers/detail/a_id/18751/c/2048/

Since downloading Mavericks last week my Mac is very slow. Anyone else having this problem? Any suggestion as to speeding things up?

Since dowloading Mavericks last week my Mac is very slow. Anyone else having this problem? any suggestions as to what to do to speed things up?

It will help people help you better if you post your iMac variant and Mac OSX version. Please do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info" button. That will give this window:
The model is in the line I've indicated with the red arrow. Please also post the results for "Memory" and "Processor."
DO NOT post the serial number, however.

Moved G5 to new location, airport not working

I just moved my G5 downstairs to the same exact place where I typically use my laptop (powerbook G4). Never had an issue with the laptop recognizing airport and going online, but now my G5 won't show any networks at all and I can't get airport to work.
Is there something I should be changing in the settings or how can I get airport to work on my G5 in the new location?
Thanks much!

Hello BDAqua
No problem, I do quite a bit of experimenting with my Macs and find out some weird things, but some are working to my advantage, I always operate my Power Mac G5 without the side panel now, but of course keep the air deflector in place, unless theres company coming over, then I replace the side access panel. Also, there is an antenna inside the G5. It runs along the opposite side of the G5 case behind the logic board to the rear of the case, where the external antenna is connected. So by removing the side access panel, it allows for moderate reception. =) As mentioned earlier though, definitely not as good as the external antenna, but when used without the access panel in combination with the external antenna, it get better reception than my 1.25GHz iMac G4 did. And by the way, this also is true for Bluetooth as well, as I have a Bluetooth Board installed in my G5. =) I loaded my G5 once I bought it (Used).
Regards again. =)

BO6.5 ORB error after moving server to new location

Post Author: seetr
CA Forum: Older Products
Our server was forklifted to a new location within our network, so the IP address changed but everything else remains the same. Now we are unable to restart the BO server. We found a location in the Configuration Tools > ORB setting where the IP was hardcoded. We were able to change the IP after stopping all BO services running on the server, but we could not complete the setting change as we keep getting the following error - "Configuration script cannot be started (Error: CFT 06002)". Any ideas? Thanks!

Hi,
What steps did you perform in the Configuration Tools to update the IP address? Can you provide details?
You may have to Update the ORB or completely recreate it.
Note that if you recreate the ORB, you need to backup your Storage folder.
But before proceeding with the above, please check the following note:
1182500 - Error: "Configuration script cannot be started(Error: CFT 06002)" when customer trying to update the ORB
Symptom
When trying to update the ORB the following error message appears: "Configuration script cannot be started(Error: CFT 06002)" You are then unable to ping the IP address for a server name.
Cause
The "C:/Winnt" or "Windows/System32" value is missing for the System variable PATH.
Resolution
Perform the following steps:
- Add C:/Winnt or Windows/System32 to the System variable PATH.
- Reboot the server.
- Update the ORB.
Hope this help.
Regards,
Jeff

Crystal Reports Moved from one file server to another - very slow opening

Hello,
I am new here, and I am in need of a solution. If I am not in the correct forum, please advise.
Our crystal reports were moved from an old file server to a new file server. Once the old file server was shut down the reports opened very slow in Designer and in our 3rd party application. Our server team determined that the reports are still attempting to connect to the old file server. If the old file server is brought online or dns is changed to reflect another machine that it can make a connection to, it opens with no delay.
For some reason, not every report is affected. Most of the reports are Crystal 8.5, but I have some Crystal XI reports that do the same thing. I can't find any reference in the reports to any file server/location....
I need to resolve this issue on the Crystal 8.5 version due to the application that we are running.
Is there a way to fix this other than to recreate the reports (I have over 400 of them)?
Any assistance or advice is appreciated!
Thanks,
Nancy

Hi Nancy,
The server info still needs to be updated. Are you setting location for each subreport also?
Possibly this registry key will help, I only have CR 2008 installed so you'll have adjust for what ever you are using:
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions - VerifyStoredProceduresOnFirstRefresh = No
and
VerifyStoredProceduresOnSetLocation = No
And
VerifyWhenDBDriverUpgraded = No
And
ViewOutOfPlaceSubreports = No
Close CR designer before making any changes. And the usual warning about modifying the registry.
Thank you
Don

New T61 TP running very slow

New to this board, so patience please!
3 weeks ago purchased a new T61 w/2.0GHz Intel duo core, 2 GB RAM and a 150GB HDD. Running XP Pro. Like the weight and feel but the performance is very, very slow. Takes 3-5 minutes to boot and when toggling between programs (ie: Outlook to Excel to IE) takes 30 sec - 1 minute to switch.
Have run "services.msc" and note there are 60+ services running! Anyone know why so many are running and which are non-essential? Have also disabled most of start-up options via msconfig. Still running very slow.
My former Asus W7 was much faster (but the battery life was very poor. And not nearly as rugged as the Lenova).
Any help much appreciated. Need speed!
Regards, Chris

Newer ThinkPads are coming with loads of stuff you don't need: Trials for Office 2007, Picassa, and a plethora of other tools you may or may not need ALL with auto updates turned on and ALL trying to update at the same time when you start.
So the second thing to do once indexing is complete is to look through Add Remove Programs, and uninstall what you do not need. For example, I did not need:
Office 2007 Trial (I use Office 2003)
Picassa (I don't need it)
Symantec Trial License (Good product, but I have a Corp. license)
CSS (disable)
ThinkVantage Updater (A tool that has NEVER worked properly)
Further, I turned off (prevented from starting) a number of things like Sonic update, and then turned off the update functions in a number of other tools (SUN Java, Adobe, Windows Auto Update, and so on). Automatic updates can really slow down a machine.
Also, in Internet Explorer, reduce (by 75 percent or more) the amount of cache it sets aside for temporary files. Once that was all done, the T60 I was working on starts reasonable quickly (as fast as needed) and performs very well.
... JDH

My new mac is running very slow

my new mac seems to run slow, but if I turn it off and restart all is ok for a short time

Once you contact Apple's Express Lane and sort out your current issue, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

The new IOS 7 is very slow on my ipad 2.

Dear all,
The New IOS7 is very slow on my ipad2.
In the past you could close all the APP's by duoble clicking the start button, but now ti's not possibl.
Is this stil necessary?

I expected a performance hit, but my iPad is now unusable with the 10-15 second typing delay. I didn't expect to loose the use of my iPad through the upgrade.
I'm going to try a restore to see if that fixes anything. After that I'm out of ideas. I will be watching your post for other responses. I too have a post worded a little differently. Maybe that will get a helpful response.

Since moving to a new MAC Firefox asks permsion to use various font whilst loading - how can I stop this?

I moved over to a new Apple Mac using a time machine back up. Since then when ever I use Firefox it stops and asks if it's ok to use a font located on an external hardrive. How can I stop this?

I tried reloading FF but had the same problem but maybe I need to completely eradicate any trace of FF first - is there a way of doing this.
I've already moved back to Safari but there are a couple of sites I have to use that don't work properly so I have to revert to FF

Authorization and moving to a new location

When I moved from my parents house to my boyfriends house Itunes said that my computer was not authorized even though it was the exact same computer. I was wondering if there's anyway to get around that? If I were to e-mail customer support and explain my situation would they be able to change it to only 1 computer authorized? The reason I'm asking is I have a desktop and I just bought a laptop. So according to Itunes I already have 2 computers authorized and I haven't done my laptop yet so that would be 3. My boyfriends getting a new desktop and I was wanting to authorize his so that would be 4 computers. What ***** is I'm moving out of state soon so if I had 4 computers authorized already when I move it's going to say they aren't authorized and I'll only have room for 1 more computer to be authorized. I wanted to authorize the computers I wanted authorized and deauthorize the 1 since it's the same computer before I move so I can listen to my music on my laptop or the desktop but I don't want to have it say they aren't authorized when I move. Also I'm not moving for another 2 months or so. Any ideas? Hopefully this wasn't too confusing lol.

ok I think I understand now lol. This stuff can be a bit confusing. So what you're saying is let's say I have 4 computers authorized I can deauthorize and then reauthorize them as many times as I want in a year but if I have 5 computers I can only deauthorize all and then reauthorize all once a year? Is that what you meant if so thank-you for answering my question it is solved.

Moved desktop to new location in home, can't connect to internet

Quick bit of background- I was using a _PowerMac G4_ downstairs in my house with a _2Wire (wireless modem)_ connection. Upstairs, I had a PC also on the 2Wire. Both connected to the net just fine.
A couple of days ago, the PC died, so I moved the PowerMac upstairs to where the PC was. Now, I am unable to pick up the internet using the 2Wire attachement. The message that I get is: +"Safari could not log in because you are not connected to the internet."+
The other thing that I noticed is that I do not have the AIRPORT icon in the top right of my monitor. Instead of the three or four curved lines, one beneath the next, I am seeing an icon that looks like a telephone receiver. The impression that I get is that either AIRPORT is turned off or that the computer doesn't recognize that it has it installed.
I've tried all of the normal HELP routes:
+- Restarting the modem+
+- Going to Apple icon -> System Preferences -> Network -> (when I get this far, AIRPORT is not listed in the left-hand column as an option, nor is it listed in the drop down for CONFIGURATION).+
+- I click on ASSISTANT but, although AIRPORT is listed, I can't select it as one of the options.+
I tried SBC Yahoo U-verse tech support but they don't have a lot of training with Apple products so I didn't get very far with them.
I recall, when I first placed the G4 in its original location, I had a similar problem. I was able to resolve it through U-verse tech support after a bit of time. I wish that I could remember the details, but I think that it had something to do with the version of OS X that I had not recognizing AIRPORT and having to perform some sort of cheat. (For the heck of it, I tried U-verse support a couple of times hoping that maybe the next tech that I got might know about this issue, but no luck so far).
Does anyone have any ideas or suggestions?
*PowerMac G4*
*OS X 10.5.8*
*Wireless Connection through 2Wire Gateway 3800 HGV-B modem*

Three tips that may help out in your situation:
• Your Airport card might have a loose connection; open your tower and make sure the card's properly connected; if the airport card itself is malfunctioning, replace it with a new one; otherwise, you won't be able to add a preferred network name in Apple pulldown/System Preferences/Network.
• Consider getting a better modem/router (e.g., 7550 ADSL2+Gateway); from what I understand, the 2-WIRE routers are based on older, less reliable technology.
• Make sure the security protocol's set to WEP; that's the only protocol that the Airport card in a PowerMac G4 can understand. If you try to set the security protocol to WPA, the handshaking between WPA and the Airport card will fail and your computer won't be able to join new networks. In short, WPA's not backwards-compatible with PowerMac G4s; it's only compatible with the newer Intel-based Macs, which, by the way, are more flexible than PowerMac G4s in that they can communicate with a broader range of security protocols, including WEP and WPA.
Good luck.
applegala530

Microsoft DPM 2010 no longer works for WSS 3.0 SP3 farm since moving farm to new SQL cluster

Hi,
I've had Microsoft DPM (first 2007, then 2010) backing up my WSS 3.0 SP3 farm since 2009. This weekend, I had to migrate the WSS farm to a new SQL 2008 SP1 cluster. I am using a SQL alias after the move. I mean, I set the alias up several
weeks before the move, but the alias name and server name were the same - SQL01. Now the alias name is SQL01 and the server name is SQL02. I know, that's exactly the way you shouldn't do it, but this farm is just months away from being decommissioned,
so I don't want to rock the boat.
So, here's the problem. Right after the SQL migration, I get a warning in DPM at the start of a recovery point creation session that states that all of the content databases have been deleted from the farm and are no longer protected. I thought
the best thing to do would be to delete and recreate the protection group. Big mistake. I deleted the protection group, that was just protecting the farm, and kept the replica data (14 weeks worth). When I try to create a new protection group,
I can expand the SharePoint farm underneath the assigned WFE, but I get the dreaded pop-up: "DPM cannot protect this SharePoint farm as it cannot detect the configuration of the dependent SQL databases. (ID: 32008)" I've verified that the three
suggested items in the error message are indeed functioning correctly, but I cannot get past this error. The WFE appears to be configured correctly, as I have run the enablesharepointprotection command using an account that is both a farm admin and a
local admin on the WFE. When I run resolveallsqlaliases, it does show all of my content databases with the appropriate alias name and logical path. On the SQL server, both the SQL Server VSS writer and Volume Shadow Copy services are up and running,
as well as the DPMRA service, which I manually started when trying to create the protection group. I have the SQL Server VSS Writer service running as the same farm admin account that I configured on the WFE.
So, I'm not sure where to go next. It appears that the issue doesn't lie with the WFE since it can enumerate all of the content databases correctly. Is there something I'm missing on the SQL server? Oh, and I have the VSS and DPMRA services
set up the same on both nodes. I've been working on this since yesterday and I'm at my wits end!
Any help or suggestions would be much appreciated!
Thanks,
Mike

How much content is in the farm and when are you planning to decommission it?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Since moving to a new location Foxfire is very slow

Similar Messages

Maybe you are looking for