Since my last GarageBand update I can no longer hear the different software amps and effects while I am playing , but they can be heard when I play back the recording

So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
Bryan

I am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .

Similar Messages

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • My ipad software version and itune is up to date but i can not sync my ipad in itune.please give me a solution

    my ipad software version and itune is up to date but i can not sync my ipad in itune.please give me a solution

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • Can I work on a different project in After Effects while rendering another (AE) project in Media Encoder?

    (I'm using the current AE CC 2014)... I've tried twice to start working on a project in After Effects while a DIFFERENT project is rendering in Media Encoder. Both times it (Media Encoder) hung up/crashed. I thought the point of a separate encoder program was so I COULD work on another project in AE at the same time another project was rendering in Media Encoder.
    Am I doing something wrong, or do I just have to WAIT for the encoding in Media Encoder to finish before I can do other things in AE?
    [I tried searching through help. If I it's there... I just missed it.]
    Thanks (in advance) for the help.

    AaronJamesLee wrote:
    Am I doing something wrong, or do I just have to WAIT for the encoding in Media Encoder to finish before I can do other things in AE?
    You should wait.
    What are the specs of your computer?

  • A game bought from the App Store crashed and I need to reinstall it, but I can't delete it from Launchpad

    I bought a game from the app store, and after playing for a while it crashed. Now it says it is damaged and I have to delete it and then re download it. When I go to the launchpad, there is no X to delete it. I paid $8 for this game and would like to play it..

    The X appears when you click and hold the icon and all the icons start jiggling.
    You can delete the app by dragging and dropping it from the Applications folder into the Trash.

  • HT5085 I purchased the Veronica Mars movie and it shows in my purchases but I can not download the movie.  When I look at downloads it says all previously purchased items have been downloaded but the movie doesn't show in my library and it won't download

    I purchased the movie Veronica Mars.  It shows in my purchases but it does not show in my library.  When I check for downloads available it says that I have downloaded all purchases in my account but this one is not there.  So frustrated with this whole system. 

    Does it show via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes for downloading ?

  • Can't log on to CC, says date and time on mac are wrong - but they are correct.

    Anyone got any ideas as to what could be wrong? Is it a clash with Adobe CC or is it an internal mac error?????

    Hi NessaQuazar,
    Please follow the below article
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thank you for posting on Adobe Forums.

  • I can no longer open a blank new tab by clicking on the +on the far right of my tabs. And I cannot open a new tab using CTRL T either. This has been happening since your last firefox update!

    Prior to one of recent upgrades in late September, I was able to open a new tab but using the + on the right unused tab. This does absolutely nothing now. I have even tried the CTRL T function and it does not work either.

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbGAM1/3.13.1.18107
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

    Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
    == today

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

    Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

    Hello, i'm using Iphone 5, with ios 7  . I have one old macbook, working with mac osx 10.6.8 and itunes last version updated. Itunes do not synchronize new contacts from my Iphone to my adress book mac.  What can i do ?

  • Printing from within iTunes has stopped working since my last iTunes update.

    Printing from within iTunes has stopped working since my last iTunes update. Using Toshiba Satellite Pro Windows 7 and HP printer.

    That's too bad.
    If/when help is truly desired, try providing some specifics of what is occurring, such as any errors that may occur when attempting to print and what specifically is attempting to be printed.

  • My partner updated to IOS 5 last night on his iPhone 4 and can no longer pick up any wifi signal and phone signal is dire in areas where he had no problem before... anyone having similar issues??

    After updating to IOS 5 on an iPhone 4 can no longer get wifi in my home and phone signal is terrible and drops out taking up to 10 mins to re-appear... anyone else having these sort of problems?? 

    I am having similar problems on my new iPhone 4S
    My mac gets good wifi connection in the same location. I measured the signal strength -- something like -77db signal vs. -90db noise.
    But my iPhone WiFi keeps cutting in and out. In fact, I left my phone on last night to update various apps over WiFi. When I checked it this a.m. I had received several warning messages from AT&T that I was nearing my 3G data limit. I looked at my phone and it had consumed nearly 100mb of cellular data overnight, when it should have been connected over WiFi.
    Needless to say, it's taken some of the thrill away from my new iPhone...

  • My camera profiles under camera calibration  (standard, landscape,etc) are missing  since I've updated to 5.6. I have a canon 6d and my computer is a mac. How can I get these profile back?

    My camera profiles (standard, landscape,etc) are missing (under camera calibration) since I've updated to 5.6. I have a canon 6d and my computer is a mac. How can I get this profile back?

    Please upload one of the files to www.dropbox.com and post a public share link in a reply, here.
    Show us a screenshot of the filename in LR that includes the extension of the file.
    Right-click on one of these files and do Show in Explorer, then show us a screenshot of the files in the folder that includes the extensions--maybe a Details view.

  • After updating old Touch to 3.1.3, can no longer hear on Bose Sounddock. How can I update to an earlier version?

    After updating old ipod touch to 3.1.3, can no longer hear it on old Bose Sounddock. How can I reverse-update to an older version? Or, is there something else I can do? I can hear the ipod on earbuds, but not on the sounddock.

    All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

  • Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

    Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

    Click here and install the software.
    (71121)

Maybe you are looking for

  • Include current file location of document in InDesign

    Hi There, is it possible to include the current location of my file in my InDesign-document like it is in MS Word? Please don't ask me why I need that, I also find it stupid but it is a requirement a project work... I would be glad to read your answe

  • Problem in message writing

    Experts,    I am working on a File to proxy scenario for service entry creation. We are creating separate folders for error files as well as for the successful service entries.       One issue is coming,  Suppose , service entry has been successfully

  • Can I delete all my recent mail addresses

    I have an ipad which has lots of recent mail addressees ---- e.g., when I type 'M', it comes up with a lot of unwanted email addresses. I know that you can delete them one at a time, but is there a n easier/ quicker way of deleting every single one w

  • How to avoid printer name prompt while calling Smartform

    Hi All, I am calling smartform FM from my program. I am passing following settings in Output-Options and Control-Parameters: wa_outputoptions-tddest = 'LP01'.  "Printer name wa_outputoptions-tdnewid = 'X'.     "New request wa_controlpara-device = 'PR

  • Calendar unable add event

    I used to add event to I Port Touch OK. But after installing IOS5, I cannot add. I can put the event in. But when I press DONE button, no effect. I cannot go to other Calendar sceen either. Is it due to IOS5 or other isse?